Error message when connect to wireless router with wifi enabled phone

Wireless router model WRT54G Ver.2
i would like to seek help on this.
I have been using a wirreless router to access the internet with my computer and it has been working fine. recently i got a handphone with wifi capability (nokia 5800). I managed to connect the phone to connect to the wireless router (it says so in the phone status). but when i tried to open the browser in the phone i got an error message "No Gateway Reply".
Can anyone help me to troubleshoot?
I enable WEP for security.
another thing is, i tried to use the phone to connect to another wireless router at the cafe, it worked well.
thanks

When you connect your handphone to your wireless network, whats the IP address you are getting it on your handphone, if required you can provide a static ip on your handphone i.e IP : 192.168.1.10, Subnet : 255.255.255.0, Default Gateway : 192.168.1.1, DNS1: 4.2.2.2, DNS2 : 4.2.2.1 and after this you can restart your handphone and try to check if you are able to go online or not.

Similar Messages

  • Http 403 error message when connecting to WRT120n router

    I recently upgraded to the WRT120n router at home. I quickly connected my desktop computer, my wife's Mac and two Lenovos, but my son's HP Pavilion cannot access the Internet. It returns the http 403 error message. Windows (Vista) and Network Magic tell me the laptop is connected to the router and the Internet, but the browser does not work. Have tried IE, Chrome and Firefox - same result. Have also tried to connect with cable. Hooking up wirelessly with WPA, was no problem, but the browser is unable to access the Internet.
    Grateful for any help.

    What is the ip address you are getting on the Vista Computer..?
    Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Wireless Network Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
    If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
    Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
    If yahoo times out then provide static DNS on your LAN Connection...
    Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Wireless Network Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online... 

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • Error message when connecting to Itunes

    Keep getting this error message when connecting.
    [IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
    I have uninstalled and reinstalled twice now.
    Its an Ipod Touch 8GB with front and back camera.
    Thanks

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

  • ITunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75  Any thoughts?

    iTunes 10.7 unknown error -1500 when connect to wireless speaker. OS X 10.75  Any thoughts?

    For reasons unknown I found copies of many of these tracks as 256 kbps .m4a files in my Trash. As such I was able to remove the existing 128 kbps .m4p (Purchased) files (but not deleting them from iCloud), add the 256 kbps .m4a files to iTunes and then Add to iCloud whereupon, the original 128 kbps listings with the download from iCloud link switched to 256 kbps (Purchased) files. For a few of the files I accidentally deleted the 128 kbps (Purchased) from iCloud and when I added the .m4a to iCloud they appeared as 256 kbps (Matched) songs instead. Not sure why the difference, but it worked for several of these problematic files. But I still don't understand why/where these .m4a versions came from as most of these purchased predated iTunes Plus (e.g., my original purchases were 128 kbps). My new list of recalcitrant files is:
    Anna Nalick: Breathe (iTunes SOTW)
    Coldplay: Parachutes (tracks 4 + 5)
    Dave Matthews Band: Stand Up (tracks 3-6, 11, 12)
    Feis: One Evening (iTunes SOTW)
    Future Leaders…: Let Me Out (iTunes SOTW)
    Hinder: Get Stoned (iTunes SOTW)
    Living Things: Ahead of the Lions (iTunes SOTW)
    Low Millions: Eleanor (iTunes SOTW)
    Spymob: Sitting Around Keeping Score (iTunes SOTW)
    As you can see, most of these are iTunes single of the week (SOTW) offerings, so I'm not too bothered about them.

  • Getting error message when connecting to public wi-fi, why?

    Getting error message when connecting to public wi-fi, why?

    What error message?
    Are you sure that the network is really public?

  • Error message when connecting 80GB Video iPod

    I'm getting this error message when trying to connect my 80GB Video iPod:
    "The iPod (name) cannot be synced. An unknown error occurred (-48)."
    Never seen this one before.
    I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
    Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
    By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
    Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
    Many thanks.

    Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
    null

  • Error message when using Spry Data set with XML

    Hi,
    I have what i see as a big problem, might just be me being
    dumm, but here we go.
    When I try to use the feature of spry XML Data Set and insert
    spry table I get error message when trying it in IE 7.
    There are even a problem when I use fireworks automated slide
    show function, where you can choose to use the Spry/XML gallery
    feature.
    The error message I get everytime (incl the auto gallery in
    fireworks) is:
    The tag: "html" doesn't have an attribute: "xmlns:spry" in
    currently active versions.[XHTML 1.0 transitional]
    The tag: "div" doesn't have an attribute: "spry:region" in
    currently active versions.[XHTML 1.0 transitional]
    The tag: "th" doesn't have an attribute: "spry:sort" in
    currently active versions.[XHTML 1.0 transitional]
    and so on.
    What´s wrong?!

    Hello barvid,
    Ok, let's take each problem step by step:
    1. The first error you see in the browser: " Exception while
    loading ..." normally appears when you try to load files that are
    not permitted by the browser security model. This means the XML
    file you try to load is located on a different server than your
    HTML which is not allowed. The browser is not permitting to load
    any files that are not in the same domain as the current page
    because of the complex security risks. You'll have to either get
    the XML file from its original location and save it in your website
    or use a proxy on your web server that should request that file
    from the external server and send it to the browser as an XML from
    the same domain as the HTML origin.
    1.2 The "Exception while loading ..." error you see is a
    generic error and my previous advise is based on my experience. In
    case this is not your scenario you'll have to open the SpryData.js
    and around line 112 you'll see the following code:
    Spry.Debug.reportError("Exception caught while loading " +
    url + ": " + e);
    Please change this line with the following line of code:
    Spry.Debug.reportError("Exception caught while loading " +
    url + ": " + (e.message?e.message:e));
    to obtain a more verbose error message that may clarify the
    reasons of your errors.
    2. The problems you describe are not browser errors but they
    are w3c validation errors. At this point the XHTML standard allows
    every application that define custom namespace attributes to also
    link a DTD to the page so the page to continue to be valid.
    Unfortunately at this point this feature is not correctly supported
    by the FF and IE so we wrote an articles about how you should
    link
    the Spry DTD to your page so the validator understand the
    custom attributes Spry use. You'll find inside the full description
    of the problems and all the technical details you'll need to know
    to solve this issue.
    Regards,
    Cristian

  • "do not have enough access privilege" error message when trying to synch iPhone with iTunes

    Primary computer crashed and got this error message when trying to synch my iPhone to iTunes with another computer I have on my Home Share.

    Same problem with my iphone too
    is ur problem resolved?

  • Error message when connecting external hdd.....NTFS 3G error.

    Im receiving the following error message when trying to connect a Clickfree portable hdd.
    I am also recieving the message when connecting a WD portable hdd that was previously working
    before installing the Clickfree hdd.....
    NTFS-3G
    Could not mount /dev/disk2s1 at volumes/CF storage because
    the following problems occurred.
    /Library/Filesystems/fusefs.fs/support/fusefs.kext failed to load (libkern/kext) link error
    Check the sys kernal logs for errors or try kextutil (8).  The MacFuse file sys is not available (71)"
    I am trying to install it on a mac OS X 10.6.8
    Can anyone help please?
    thanks

    Regarding uninstalling, this is from the FAQ on the MacFuse site (http://code.google.com/p/macfuse/wiki/FAQ):
    Q 2.3. How can I uninstall MacFUSE?
    A: Launch the Mac OS X System Preferences application and go to the MacFUSE preference pane. Click on the "Remove MacFUSE" button. This will uninstall all MacFUSE components except the preference pane itself.
    You can keep the MacFUSE preference pane around should you decide to install MacFUSE again in the future. If you do wish to remove it, you do it just like how you would remove any other non-Apple preference pane: In System Preferences, control-click (right-click) on the MacFUSE icon and you will see "Remove ..." as an action.
    Only if you had the "Show Beta Versions" button checked in the MacFUSE prefpane, you'll have a property list (plist) file remaining at this point:/Library/Preferences/com.google.macfuse.plist. To remove it, you should uncheck the button before you remove the prefpane as described above.
    Note that an official (correct) MacFUSE installation will have a preference pane if you have MacFUSE 2.0 or later installed. If you have an older version of MacFUSE, you can uninstall as follows.
    The other thing you can do if you're having problems is go into System Preferences and there should be an icon for MacFuse.  By going into that there may be an option to disable it.  If so, do that first before attempting to uninstall and try mounting your drives again.

  • Error message when connecting to I Tunes

    I am getting an error message when I connect to ITUNES that says I do not have anymore capacity for more songs. I have a mini and only have 300 songs on it. Any ideas? It still says I have 2.9GB avialable on MINI. Any help would be appreciated...

    BTT

  • Error message when connecting Nano to computer - please help!

    I just started getting an error message when I try to disconnect my Ipod Nano from my computer after it's done charging/updating. The message tells me the device can't be stopped because other programs are utilizing files on my nano.
    I tried restarting my computer, but it froze. It's happened twice now and I have had to disconnect it when it says not to. Please help!

    I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

  • Why do I keep getting an error message when trying to share photos with facebook?

    In i photo there is a facebook button-and I keep getting an error message when I try to sign in and use it any ideas why?

    Kind of hard to answer without some details such as iPhoto version and OS version. Are you signed into your Facebook account?

  • WRT160N Router Error message when connecting wireless

    This is the advanced error report I received after diagnosing my connection. Everything I have tried to do has not solved my problem. Please Help! Thanks
    Helper Class (RNWF MSM Helper Class) Event:
    Wireless Diagnostic Helper Class Event
    For complete information about this session see the Wireless Diagnostic Informational Event.
    Helper Class: Native WiFi MSM
     Initialize status: Success
    Information for connection being diagnosed
     Interface GUID: 0c5fedf8-83c2-45eb-a664-bc2385294b58
     Interface name: Intel(R) Wireless WiFi Link 4965AGN
     Interface type: Native WiFi
     Profile: DaveJeremyCameronBen
     SSID: DaveJeremyCameronBen
     SSID length: 20
     Connection mode: Infra
     Security: Yes
     Connect even if network is not broadcasting: No
    Result of diagnosis: Problem found
    Root cause:
    The wireless settings for the network adapter on this computer don't match the settings of "DaveJeremyCameronBen"
    The selected data rate is not correct.
    Detailed root cause:
    802.11 connection failed due to status code 18: Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter
    Repair option:
    View the wireless network adapter settings on this computer to verify they are compatible with this network
    If you set up or own this network, you might be able to fix the problem by changing the settings on the wireless router or access point to be compatible with the settings on this computer. Contact the network administrator for "DaveJeremyCameronBen" or your hardware manufacturer for further assistance.
    Event Verbosity:0
    Solved!
    Go to Solution.

    I think there is a profile saved on your wireless computer.
    What is the operating system on your computer ?
    Delete the profile on your wireless computer. I think you are using the intel wireless adapter on that computer.
    Open the Intel wireless adapter utility. There you will find the profiles saved on your computer. Delete the wireless network profile that you are trying to connect.
    Now open the setup page of the wireles router. Go to the wireless tab. Check the wireless network name. Click on wireless security tab and check the wireless security settings. Make sure that you have the correct network key/password.
    Now try to connect to the wireless network again.
    If it is windows XP operating system then you can also connect to the wireless network using the windows wireless network utility.

  • Is there a facility to more easily sync music my four Apple devices and my wife's three Apple devices without the horrid iTunes error messages when there is nothing wrong with our connection?

    We’ve been using iTunes Match pretty much since the beginning, but recently my wife has turned it off and refused to re-subscribe. I’m fast getting to the same place. It just seems so unstable, wishing Apple would invest some of their billions into it. I read with dismay how many people find Google Play to be so much better. As I write this I see a “Cannot connect to iTunes store” on my iPhone. Noting wrong with our connection … it’s alive and well.
    Bearing in mind that I have two Macs, an iPhone and an iPad and my wife has a Mac, iPhone and iPad what we really want is the following.
    I want all our music to go up to one location (iCloud or even better our own server). I want an app or web app that I see on the right hand side a list of artists or albums (or playlists) and columns for each device. I want to be able to tick the “matrix” to specify which devices the artist/album/playlist should be downloaded to. When the device is switched on, it must download (no fuss no bother and no stupid I-can’t-do-anything-about error message). A nice enhancement would be to specify three options for each entity (Download, Stream, Not Available). There must be options to easily bulk select.
    So … is there such a thing out there?
    In my immediate family plus spouses and kids girlfriends/boyfriends there are 11 Macs, three iPads and 10 iPhones. My brothers are very similar. I have nieces and nephews that use Apple. My parents also use Apple. Collectively, we have a bunch of Apple equipment.
    Did I mention I'd like it to be stable?

    Unless you have EE 4G service the UK 3G networks are the base of your problem - they are just far to variable in download and streaming speeds.
    Add to the fact that use can/will eat into your Data usage !
    ITunes Match as a service is pretty experimental at best over 3G and really i think so long as you have a 32GB or larger iOS device sync'ing via iTunes on a PC/Mac remains the best way to transfer music.
    Remember even with iTune Match your music is STILL ON your own PC/Mac HDD !
    Usng the devices tab in iTunes you can customize each differing identified iOS device and load as you please.
    When we have a competitively priced stable and extensive LTE network in the UK then reconsider Match at that point.

Maybe you are looking for