Error message when connecting through USB

"One of the devices attached to this computer has malfunctioned, and windows does not recognize it."
I've tried plugging it into several different ports and restarting my computer. I have the latest edition of iTunes on my PC. I was able to connect it to the computer at work and Windows was able to recognize it there. Any suggestions?

try downloading this:
http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html

Similar Messages

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • Error message when connecting to Itunes

    Keep getting this error message when connecting.
    [IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
    I have uninstalled and reinstalled twice now.
    Its an Ipod Touch 8GB with front and back camera.
    Thanks

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

  • Getting error message when connecting to public wi-fi, why?

    Getting error message when connecting to public wi-fi, why?

    What error message?
    Are you sure that the network is really public?

  • I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
    iPad: Unable to update or restore

  • Error message -1073807298 when connecting through USB

    Hi,
     I am trying to retrive data from an instrument through serial port as well as USB,
     My vi works smoothly while connecting through serial port.
     But when i try to connect through USB Error code-1073807298
     is coming. This error comes when visa try to write to the instrument.
     From visa configure serial port.vi  no error is coming.
     Can someone suggest a method to solve this problem... 

    I get exactly the same error code with a TCP raw socket connection, the weirdest thing is that I actually can read the result of the query. I fixed the problem reading one byte at a time but this is very inefficient (it uses a while loop) and I still get warnings, so I'd like to know if there is a way to fix this or if there is an equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections....
    This is the WARNING that I get when I read one byte at a time:
    Warning 1073676294 occurred at VISA Read in LV.vi
    Possible reason(s):
    VISA:  (Hex 0x3FFF0006) The number of bytes transferred is equal to the requested input count. More data might be available.
    This is the ERROR  that I get when I set the byte count to 1024:
    Error -1073807298 occurred at VISA Read in LV.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF003E) Could not perform operation because of I/O error.
    I enclosed the VI for your review,
    Thanx in advance for your help,
    Attachments:
    LV.vi ‏22 KB

  • Ipod error message when connected. Please help

    Windows XP
    I have had my 30 gigabyte ipod for almost a year and i've never had any problems with it before. But recently our area wasn't able to get broadband. So i was unable to download the recent ipod and itunes updates. I have done that now.. but i think something has affected my ipod. When i plug it into my computer nothing comes up on my ipod screen and i can continue browsing music etc.. i know this isn't supposed to happen. And on my computer an error message comes up saying "USB device not recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. "
    Please help me!

    Okay. So i'll tell you the steps i have taken. I've uninstalled all the ipod updaters i had on my computer, eg 2006 and 2005.. and i reinstalled the latest version of itunes. I also went to device manager and all that but it only came up in the list at "unknown device" and i uninstalled the driver and tried to reinstall it but it came up saying it was an unknown device again. I tried right clicking on it and going "scan for hardware updates" but it told me the one i have installed is the nearest match. I also tried connecting my ipod to my computer in disc mode which did nothing. But i have discovered my ipod charges when i plug it in.. but the computer freezes on the black dos screen (as it always has for me when i turn the computer on with the ipod plugged in) and the ipod remains charging. but it seems if i plug it in after windows has loaded it's not even recognised.
    I'm sorry for making it so long but i really really need help

  • Error message when connecting 80GB Video iPod

    I'm getting this error message when trying to connect my 80GB Video iPod:
    "The iPod (name) cannot be synced. An unknown error occurred (-48)."
    Never seen this one before.
    I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
    Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
    By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
    Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
    Many thanks.

    Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
    null

  • Error message when connecting Nano to computer - please help!

    I just started getting an error message when I try to disconnect my Ipod Nano from my computer after it's done charging/updating. The message tells me the device can't be stopped because other programs are utilizing files on my nano.
    I tried restarting my computer, but it froze. It's happened twice now and I have had to disconnect it when it says not to. Please help!

    I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

  • Error message when connecting external hdd.....NTFS 3G error.

    Im receiving the following error message when trying to connect a Clickfree portable hdd.
    I am also recieving the message when connecting a WD portable hdd that was previously working
    before installing the Clickfree hdd.....
    NTFS-3G
    Could not mount /dev/disk2s1 at volumes/CF storage because
    the following problems occurred.
    /Library/Filesystems/fusefs.fs/support/fusefs.kext failed to load (libkern/kext) link error
    Check the sys kernal logs for errors or try kextutil (8).  The MacFuse file sys is not available (71)"
    I am trying to install it on a mac OS X 10.6.8
    Can anyone help please?
    thanks

    Regarding uninstalling, this is from the FAQ on the MacFuse site (http://code.google.com/p/macfuse/wiki/FAQ):
    Q 2.3. How can I uninstall MacFUSE?
    A: Launch the Mac OS X System Preferences application and go to the MacFUSE preference pane. Click on the "Remove MacFUSE" button. This will uninstall all MacFUSE components except the preference pane itself.
    You can keep the MacFUSE preference pane around should you decide to install MacFUSE again in the future. If you do wish to remove it, you do it just like how you would remove any other non-Apple preference pane: In System Preferences, control-click (right-click) on the MacFUSE icon and you will see "Remove ..." as an action.
    Only if you had the "Show Beta Versions" button checked in the MacFUSE prefpane, you'll have a property list (plist) file remaining at this point:/Library/Preferences/com.google.macfuse.plist. To remove it, you should uncheck the button before you remove the prefpane as described above.
    Note that an official (correct) MacFUSE installation will have a preference pane if you have MacFUSE 2.0 or later installed. If you have an older version of MacFUSE, you can uninstall as follows.
    The other thing you can do if you're having problems is go into System Preferences and there should be an icon for MacFuse.  By going into that there may be an option to disable it.  If so, do that first before attempting to uninstall and try mounting your drives again.

  • Error message when connecting to I Tunes

    I am getting an error message when I connect to ITUNES that says I do not have anymore capacity for more songs. I have a mini and only have 300 songs on it. Any ideas? It still says I have 2.9GB avialable on MINI. Any help would be appreciated...

    BTT

  • USB Power Error Message When Connecting NANO

    Windows XP Pro on desktop computer gave an error message that the USB port power too high or something to that effect. This has happened three times with Nano. Purchased the Nano only two days ago. I also connected the Nano to my Windows laptop to charge and it bucked the laptop battery and shut it down. Is this normal? Should I just return the Nano?

    Normally the error you get is about the port not having enough power, so I don't know how it could be too high. Not sure what you mean by "bucked the battery" either, but it doesn't sound good. If it were me, I'd consider swapping the iPod for a new one to see if it's defective.

  • IPod Error Message when connected to the computer

    When I have my iPod connected to my computer and listening to it's music through the computer, or even just updating songs onto my iPod, I always get an error message.
    It doesn't really do anything, except it's just there and it's bugging me...On the bottom right of my computer where the time is- thats where the message pops up and it keeps on coming back every 10 minutes or so.
    The message says-
    iTunes.exe - Corrupt File
    The file or directory /iPod_Control/iTunes/Temp File 1 is corrupt and unreadable. Please run the Chkdsk utility.
    How would I go about fixing this, and what the hellll does it mean?????
    Thanks in advance for the help

    I've sort of figured out what the error message means- as in what it does to my iPod...
    I am unable to add music to my iPod anymore. Anytime I connect my iPod to my computer and try to "safely remove it" with the eject thing, it says it is unable to because it is being files from my iPod Mini are being used by other files(I completely shut down all other music files and still received this message)...
    So since I am unable to "safely remove the hardware", I have to do it without clicking the little eject iPod thing. When I do that, my iPod doesn't save any of the music I just put on it, and it comes out exactly the way it was before...
    Any idea how to fix this, and how I got it???
    And for some reason...My iPod keeps on telling me theres not enough room on it for any more songs when their is over 2.3 GBs left...
    What issss going on here???

  • HP Photosmart D110 Series getting error message when connecting to web services

    Hello guys!
    Hope someone can help. We have a HP Photosmart D110 series that is a couple years old. I am trying to get it connected to the web services feature for my wife. When we first got the printer it connected with no problems. When I go and click on enable web services it tells me cannot connect to server. Same error message happens when I try to do a product update. I tried to change manual preferred to 8. 8. 8. 8. and manual alternate to 8. 8. 4. 4. with no luck. 
    Any help would be greatly appreciated!
    Thanks!!!
    Daniel

    Hi Daniel, is there a chance that something has change in the intervening time in your home network e.g. a new router? This link contains a list of suggested troubleshooting steps to take if you're experiencing connectivity issues with HP Cloud Services. Try working down through them to isolate and correct the problem that is preventing you getting the D110 to connect to ePrint http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/ePrint-Apps-Connecti...
    Post back with how you get on.
    Best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Error message when connecting ZLINUX/DB2 with Oracle

    Hi BW gurus,
    We are upgrading to BI 7.0 & ECC 6.0.  We are on the operating system: ZLINUX/DB2 Operating System.
    The ZLINUX/DB2 OS needs to be connected to the Oracle system through DB connect. As there is no direct connection between these two,
    have to install an application server client compatible to windows.
    When trying to install the client; we are getting the following error message:
    " Can not NFS mount the /sapmnt/<SID> file system or /usr/sap/trans file system from zLinux to a Windows server running the new version of NFS service in R2.  The problem does not happen on my XP desktop running Window Services for Unix.
    Please guide me in this regard about how to proceed.
    Thanks in Advance
    Regards,
    Bala

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

Maybe you are looking for

  • Crystal Reports - Failed to retrieve data from the database

    Hi There, I'm hoping that somebody can help me. I've developed a crystal report from a stored procedure which I wrote. I can execute the stored procedure within SQL Server and within the Crystal Reports designer without any errors. Furthermore, I hav

  • Problem with bapi to create purchase requisition

    I got a requirement that to upload details of procurement into Z table with a temporary PR. Could u please suggest the procedure or bapi to upload datainto Z table. Regards

  • Go to the op of next article

    How do I make swipe horizontal to new article go to the top of the article? I thought it was default, but obviously not. Nina Storm

  • Objects missing when exporting to PDF, but show up when printing to PDF

    Hi - I'm working with someone, both of us in InDesign CS4, and she has some documents that cause a few random objects to just go missing when exported to PDF (same on my computer). But when printing to PDF, they show up fine. They also show up fine i

  • UniVision videos will not play in Safari (iMac)

    The videos play on my iPad2 but not on my iMac. I tried the usual - disabled all extensions, allowed cookies, enabled javascript-  to no avail. I keep getting the endless rotating 'gear'. Flash videos work perfectly everywhere except on the UniVision