Error message when connecting to bt mail using any...

It does not matter if I connect through bt.com or direct to bt mail I get the same error message no matter what computer \ browser or internet connection I use at home work or wirelessly
Continue to Yahoo! log in
We can't log you into your BT Yahoo! Mail at the moment. To access your email, please continue to log in via the Yahoo! website at www.yahoo.co.uk
This has been happening for the last 3 days I am however now able to access via yahoo has the original access now been removed ?

recomend you just use pop mail if using a home machine, phone etc makes life easier.

Similar Messages

  • Error message when connecting to Itunes

    Keep getting this error message when connecting.
    [IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
    I have uninstalled and reinstalled twice now.
    Its an Ipod Touch 8GB with front and back camera.
    Thanks

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

  • Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

    Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

    http://support.apple.com/kb/TS3281

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • Getting error message when connecting to public wi-fi, why?

    Getting error message when connecting to public wi-fi, why?

    What error message?
    Are you sure that the network is really public?

  • I always got error message when opening BlackBerry App World using 3g

    Hi there, I always got error message when opening BlackBerry App World using 3g network, but it's fine if I open it through wifi network. Does anyone ever had the same problem and how to fix it? Thanks.

    You need the latest version of BlackBerry World installed on your smartp

  • I can't upload Iphone 5 video or send it in an email. It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

    It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • Error message when connecting 80GB Video iPod

    I'm getting this error message when trying to connect my 80GB Video iPod:
    "The iPod (name) cannot be synced. An unknown error occurred (-48)."
    Never seen this one before.
    I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
    Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
    By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
    Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
    Many thanks.

    Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
    null

  • Mail 2.1 and password error message when checking for incoming mail

    I get a "password rejection" error message when Mail 2.1 tries to check for incoming messages and there are no messages to retrieve (I have an Earthlink account). I don't have any problems sending messages. When I send a test message to myself, Mail can retrieve it. When I check mail a few minutes later, I get the "password rejection" message from Earthlink. This also happens when I use MS Entourage (v10.1.6). I have been using Entourage for years and just recently started using Mail and this password problems seemed to appear recently (last few weeks).
    Has anyone else experienced a similar problem? Since this happens in both Mail and Entourage, I don't know if it is Mac OS 10.4.10 or Earthlink. I tried Earthlink tech support and they were not much help.
    Thanks,
    Kenny

    Problem resolved by itself. I think it was a problem with my ISP.

  • Error message when connecting external hdd.....NTFS 3G error.

    Im receiving the following error message when trying to connect a Clickfree portable hdd.
    I am also recieving the message when connecting a WD portable hdd that was previously working
    before installing the Clickfree hdd.....
    NTFS-3G
    Could not mount /dev/disk2s1 at volumes/CF storage because
    the following problems occurred.
    /Library/Filesystems/fusefs.fs/support/fusefs.kext failed to load (libkern/kext) link error
    Check the sys kernal logs for errors or try kextutil (8).  The MacFuse file sys is not available (71)"
    I am trying to install it on a mac OS X 10.6.8
    Can anyone help please?
    thanks

    Regarding uninstalling, this is from the FAQ on the MacFuse site (http://code.google.com/p/macfuse/wiki/FAQ):
    Q 2.3. How can I uninstall MacFUSE?
    A: Launch the Mac OS X System Preferences application and go to the MacFUSE preference pane. Click on the "Remove MacFUSE" button. This will uninstall all MacFUSE components except the preference pane itself.
    You can keep the MacFUSE preference pane around should you decide to install MacFUSE again in the future. If you do wish to remove it, you do it just like how you would remove any other non-Apple preference pane: In System Preferences, control-click (right-click) on the MacFUSE icon and you will see "Remove ..." as an action.
    Only if you had the "Show Beta Versions" button checked in the MacFUSE prefpane, you'll have a property list (plist) file remaining at this point:/Library/Preferences/com.google.macfuse.plist. To remove it, you should uncheck the button before you remove the prefpane as described above.
    Note that an official (correct) MacFUSE installation will have a preference pane if you have MacFUSE 2.0 or later installed. If you have an older version of MacFUSE, you can uninstall as follows.
    The other thing you can do if you're having problems is go into System Preferences and there should be an icon for MacFuse.  By going into that there may be an option to disable it.  If so, do that first before attempting to uninstall and try mounting your drives again.

  • Error message when connecting to I Tunes

    I am getting an error message when I connect to ITUNES that says I do not have anymore capacity for more songs. I have a mini and only have 300 songs on it. Any ideas? It still says I have 2.9GB avialable on MINI. Any help would be appreciated...

    BTT

  • Error message when connecting Nano to computer - please help!

    I just started getting an error message when I try to disconnect my Ipod Nano from my computer after it's done charging/updating. The message tells me the device can't be stopped because other programs are utilizing files on my nano.
    I tried restarting my computer, but it froze. It's happened twice now and I have had to disconnect it when it says not to. Please help!

    I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

  • Error message when opening iTunes and Mail

    I'm running OS X 10.6.8 on a Mac Book.
    Since the recent 'hack' reports, I subsequently changed my Apple Password.
    Since then, when I open iTunes I get the error message:
    "You are signed in with a different Apple ID than previously used with podcsts. Do you want to sunc these podcast subscriptions and stations with <my e-mail address>?
    If you chose to sync then these podcasts and stations will be merged with any that have been syncing on other devices or computers.""
    If I click the highlighted blue 'Sync' button, it does sync, but it's frustrating that I always get the error message. Why is this happening?
    Also, when trying to use Gmail, I now get the error message:
    "Enter Password for Account GMail.
    Enter the password for user <my g-mail address> on POP server imap.gmail.com"
    Neither my old or new password allows me to use Mail. Can anyone help?
    Thanks

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Error #572 when connecting to smtp mail server

    Hello everybody!
    I think there are a lot of possible problems may appear when using the UTL_SMTP package in different ways.
    Could anybody tell me whether the error message "ORA-29279: 572 a domain name must be specified" has ever been seen and corrected.
    The following message appears when I call
    c:=utl_smtp.open_connection('w.x.y.z',25);
    where w.x.y.z is a correct static IP-address used in my organization which is working when used in Outlook Express, telnet and other programs, but isn't working in Oracle!
    When I pass to this function a not existing domain the error message is "421 Service not available", but if in my occasion the message is different then the domain exists! But what's wrong? Could anybody tell me?
    I haven't seen an answer to my question anywhere! This error message isn't documented at all!

    Well!
    I don't know exactly who is 'another mailer daemon' and how to start 'Collaboration Suite'. Are they some services running in OS?
    But...
    My problem somehow has been corrected. Though I don't know how and when.
    When I looked more close to the error I've seen that there is no more error while trying to connect, but it was at the beginning! I just suppose that the IP-address could be seen from Oracle after I configured e-mail in the Oracle Management Server and specified that IP there. Could it be so?
    Anyway, thank you very much for your help!

  • IPod Error Message when connected to the computer

    When I have my iPod connected to my computer and listening to it's music through the computer, or even just updating songs onto my iPod, I always get an error message.
    It doesn't really do anything, except it's just there and it's bugging me...On the bottom right of my computer where the time is- thats where the message pops up and it keeps on coming back every 10 minutes or so.
    The message says-
    iTunes.exe - Corrupt File
    The file or directory /iPod_Control/iTunes/Temp File 1 is corrupt and unreadable. Please run the Chkdsk utility.
    How would I go about fixing this, and what the hellll does it mean?????
    Thanks in advance for the help

    I've sort of figured out what the error message means- as in what it does to my iPod...
    I am unable to add music to my iPod anymore. Anytime I connect my iPod to my computer and try to "safely remove it" with the eject thing, it says it is unable to because it is being files from my iPod Mini are being used by other files(I completely shut down all other music files and still received this message)...
    So since I am unable to "safely remove the hardware", I have to do it without clicking the little eject iPod thing. When I do that, my iPod doesn't save any of the music I just put on it, and it comes out exactly the way it was before...
    Any idea how to fix this, and how I got it???
    And for some reason...My iPod keeps on telling me theres not enough room on it for any more songs when their is over 2.3 GBs left...
    What issss going on here???

Maybe you are looking for

  • High memory usage when many tabs are open (and closed)

    When I open Firefox the memory usage is about 70-100 MB RAM. When I'm working with Firefox I often open 15-20 tabs at once, then I close them and open others. Memory usage increaes up to 450 - 500 MB RAM. After closing the tabs the usage usually decr

  • S-video adapter not recognized IMac 17 1.6GHz HELP!

    Hi all! Have used my mini-vga to s-video adapter in the past have also used my mini-vga to vga to display on my 47" lcd tv. But now when i plug in my S-video adapter it outputs VGA over the S-video cabel kind of confuses anything connected to it. My

  • Is there any problems in IE if using RMI.?

    Hello buddies, this is my 3rd attempt to get answer. before it i tried 2 times but didn't get answered. actually i m making a chat application. in that there is a canvas on which we can draw something and send it to all users. i make an applet and fr

  • Small tablet/laptop for LR use

    What new small portable devices will run Lightroom 4? Looking for a good tablet/laptop for travel as a professional photographer, hoping for something in the windows market that isn't too pricey. Thanks for any suggestions

  • Extractor 0FI_AR_4

    Hello all, I have a field hidden in my AR extarctor, I am using the BI one, is there a way I can remove the check mark on hidden field so that its available for reporting? Plz adv. Tina