Error message when doing HCM "change employee salary" on portal

Hi experts,
We have a problem when user did the "salary change" HCM form on HR portal.
We checked the workflow log by SWIA, work item 23546, and there are error messages described as below:
Error when processing node '0000000005' (ParForEach index 000000)
Work item 000000023546: Object FLOWITEM method EXECUTE cannot be executed
Error updating the process object
Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->
Transaction brackets of the workflow has been damaged
Error when creating a work item
Error when creating a component of type 'Step'
Error when processing node '0000000005' (ParForEach index 000000)
Error when starting work item 000000023546
Agent determination for step '0000000005' failed
Error in resolution of rule 'AC17900012' for step '0000000005'
No authorization for user PRONKAI content Form Scenario content group ZPSP activity P
Error when creating a work item
Error when creating a component of type 'Step'
Can anyone help me to analyze the error messages and the possible reason to cause this error?
Any useful hint will be appreciated.

Gentlemen - the problem has been found and resolved. Seems like the XML Data Source cannot contain a reference to a validating DTD. Once the following reference was removed AND I used employee instead of Employee in the template all worked.
<!DOCTYPE employees SYSTEM "employees.dtd">
I assume this is correct - not being able to contain a DTD reference? I will also, tomorrow (read that as probably Monday) be trying the same thing using XML Schema vaildation.
THANKS for the help - Casey

Similar Messages

Error message when doing a back up

Hello,
I am getting an error message when trying to back up my iPhone 6 through iTunes. My iPhone 6 is 128GB. I'm up to date using iOS 8.3 I've never had a problem until today. What can I do to remedy this?
Also, my "other" is now up to 13.5GB. Do I need to wipe the phone and start from scratch? Thank you for any help on this!

Jailbroken?

Why do we get First operand...error message when trying to change password

Hi
I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
We are using PeopleSoft Financials 8.8 SP1.
We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
I cannot replicate it in our test environments.
I have confirmed that we have the PSWDEXPR permission list in our environment.
I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
Any suggestions?

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Error message when doing SUBMIT

Hello there,
i am just working on BSP pages that call ABAP Reports with "Submit" and display the Results within the BSP.
My Problem now is that some reports may come up with an Error message (type 'E') that stops the report and the processing of the BSP Page. The page displays then a "500 internal SAP Error".
I found a good weblog here: /people/mark.finnern/blog/2003/09/16/bsp-in-depth-message-statement-handling but also to encapsulate the Submit by a function call does not help here. The page stops when calling the submit.
Is it somehow possible to prevent the BSP-Page from terminating and catch the error message from the Report? I can not modify the Reports that are called.
Thanks for any help,
Stefan
6.20 SP49

Hi Stefan,
If your report returns the error message or message id, you could pass this on as an export parameter in your wrapping function back to your BSP event.
To display the error message on the same BSP page, include the following code in the event where err_msg is the error message from your report passed on to the function:
page->messages->add_message(
condition = 'REPORTERROR'
message = err_msg
severity = page->messages->CO_SEVERITY_ERROR ).
In the layout of the BSP page include the following code where you want the error message to be displayed:
<font color="red"><%= page->messages->assert_message( 'REPORTERROR' ) %></font>
Make sure the condition has exactly the same name in the event and the layout.
Additionally you could also use the SY-SUBRC after your SUBMIT statement and display a generic message for an internal error if the SUBMIT statement itself fails.
Regards,
Rohini.

Error message when trying to change Foreground/Background color

Just in case anyone is having this problem in Photoshop CC where when you try to change/exchange or set to default the Background/Foreground colors and you get an error message of something like "Could not complete because of program error". I found the cure for this in an archive from when CS6 was in beta testing. Basically you have to delete the preferences file and restart the program. Here's a link to the article http://forums.adobe.com/message/4336237. Apparently this "beta" problem can still occur as I am using the most recent version of Photoshop CC.

If you are trying to change the settings of your Router using the LELA software, and if you are getting an error message "Unable to Save the Data" its better you can exit from the LELA software and change all the Configuration settings on your Router Manaully.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, Click on the Wireless tab
Below you can make the changes on your Router ( SSID, Channel and let the SSID Broadcast should be Enable) and click on Save Settings...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the security Mode to WPA Personal and under Passpharase type in your Security password and click on Save Settings..
Once done, Now on your computer try to connect to your Wireless Network. Once connected you should be Online from your Computer.

Error message when doing settlement for Internal order

Hi,
Can someone please help me to resolve the following error:
When trying to run settlement for an internal order, following error message is generated:
Item 001 Order xxxxx budget exceeded
Message no. BP603
Diagnosis
Budget was exceeded by xxxx amount in document item 001 Order xxxxxx.
Also following points may be relevant:
- System status ISBD for Internal Order is active
- There is no PR/PO for the order, direct invoice from FI is created through tcode FB50
- Availability control: Activation Type 1, Overall field ticked in customization
- Tolerance Limits: Availability control action .... Usage 85 % - Warning message, Usage 100 % - Error message
Thanks,
Ankita

Hi Loong,
Thanks for reply.
I have already tried drilling down the report S_ALR_87013019 , however following are the only things available from the report.
1. There is a year independent overall budget for the order of 92500 amt.
2. Actual in 2009 is 7870.41 and in 2010 is 77980.24. So the total actual amt is 85850.65 overall.
3. The available budget is 6649.35. i.e Over budget minus actual utililized amounts.
Since, in the report it shows that the budget is available then I am unable to figure out why does it give error for exceeding budget by amt 50100.65 at the time of settlement.
Regards,
Ankita

Duplicate error message when doing validation

hi am geting two same error when validation,i what to display only one error message
am in jdeveloper 11.1.1.6.0,am geting duplicate validation error message
this is how am doing validation
<af:inputText value="#{bindings.Organisationname.inputValue}"
                                  simple="true"
                                  columns="20"
                                  maximumLength="#{bindings.Organisationname.hints.precision}"
                                  shortDesc="#{bindings.Organisationname.hints.tooltip}"
                                  id="it1" autoSubmit="true" required="true"
                                  validator="#{pageFlowScope.orgvalidation.chkOrgName}"
                                  label="Organisation Name">
                      <f:validator binding="#{bindings.Organisationname.validator}"/>
                    </af:inputText>
public String checkName(String orgname){
ResultSet rs;
Row curPerson;
String value= null;
OrgAppModuleImpl am =(OrgAppModuleImpl)ADFUtils.getApplicationModuleForDataControl("OrgAppModuleDataControl");
try {
System.out.println("valueadded "+orgname.toUpperCase());
value =am.findbyOrgname(orgname.toUpperCase().trim());
System.out.println("valueadded "+value);
catch (Exception e) {
e.printStackTrace();
return value;
public void chkOrgName(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
String value =(String)object;
String evalue= checkName(value);
if( evalue == null){
}else{
FacesMessage message = new FacesMessage();
message.setSeverity(FacesMessage.SEVERITY_ERROR);
message.setSummary("Organisation Name already exists.");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage("esecurity", message);
throw new ValidatorException(message);

yes i what two diffirent validation which is required=true and checking for duplication this is not what am talking about,what am talking about is the two message for duplicate validation for checking duplicate,am geting this message twice in the error message
public void chkOrgName(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
String value =(String)object;
String evalue= checkName(value);
if( evalue == null){
}else{
FacesMessage message = new FacesMessage();
message.setSeverity(FacesMessage.SEVERITY_ERROR);
message.setSummary("Organisation Name already exists.");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage("esecurity", message);
throw new ValidatorException(message);

Error Message when doing a Stock transffer using Mvt Type 309 using MIGO

Hi Team,
I am getting an error message M7-441 "Selection by multiple account assignment was not restricted", when doing a stock transfer.
I am not able to understand the exact issue here, any help is appreciated.
Regards
Raj

M7441 seems to be a new error message which came with EHP4
I can only see that it is used in MB51 report (do you search for material documents in MIGO when you get this error?)
according to the coding in my system this is just a warning message, not an error message, hence you could continue by cklicking the okay icon.

ERROR MESSAGE WHEN DOING SIMPLE QUERY TO RETRIEVE LARGE AMOUNT OF DATA

Hello,
Am querying my database(mysql) and displaying my data in a
DataGrid (Note that am using Flex 2.0)
It works fine when the amount of data populating the grid is
not much. But when I have large amount of data I get the following
error message and the grid is not populated.
ERROR 1
faultCode:Server.Acknowledge.Failed
faultString:'Didn't receive an acknowledge message'
faultDetail: 'Was expecting
mx.messaging.messages.AcknowledgeMessage, but receive Null'
ERROR 2
faultCode:Client.Error.DeliveryInDoubt
faultString:'Channel disconnected'
faultDetail: 'Channel disconnected before and acknowledge was
received'
Note that my datagrid is populated when I run the query on my
Server but does not works on my client pcs.
Your help would br greatly appreciated here.
Awaiting a reply.
Regards

Hello,
Am using remote object services.
USing component (ColdFusion as destination).

Error message when doing invoice verification.

Hi Gurus,
During doing invoice verificition with delivery notes.Im getting a error message that level F1 belong to cash postion,source symbol PSK.Plz any body can help me to solve it
Thanx

Hi
Planning level belongs to the cash position, which means you can only use it for G/L account line items.
Levels are defined and allocated to a source symbol in view V_T036. The source symbol is allocated to the cash position or the liquidity forecast in view V_T039.
Please check these Tables using Transaction SM30

Csm error message when doing deploy to device

hi
i have csm 4.3 and i did deploy to file and it was a success , when i am doing deploy to device i am getting an error saying:
an error response from the device prevented succeful completion of this operation. the device provided the following description: crypto map CSM_outside_map 1 match address CSM_IPSEC_ACL_24:unable to locate access-list CSM_IPSEC_ACL_24
when i am doing preview their is no problem
what this message meen?

Hello,
Am using remote object services.
USing component (ColdFusion as destination).

Error message when trying to change password...

I get the following error when I try to change the router password in the main splash window(left panel)...
Error code: 82BD0302
Error description: An HNAP call to the device was rejected due to incorrect authentication credentials.
Model name: unknown
Model number: E3000
Serial number: CVQ01L209371
Firmware version: unknown
Operating system: Windows XP SP 3
Software version: 1.3.11006.1
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: 192.168.1.114
Also, this is very important... the router has changed the main admin password to the wireless pasphrase and I cannot undo it! When I change the password back to what I want it to be and save it acts like it is working but then when I start up Cisco Connect it tells me the password has been changed back to what it was prior to changing and saving it.

Also, this is very important... the router has changed the main admin password to the wireless pasphrase and I cannot undo it! When I change the password back to what I want it to be and save it acts like it is working but then when I start up Cisco Connect it tells me the password has been changed back to what it was prior to changing and saving it.
Sounds to me like you'll have to uninstall / reinstall Cisco Connect.

Error message when trying to change brush colors.

Using CS6 beta and everytime I use the color picker or hit the x or d key I get this message: could not complete your request because of a program error.
Using Windows 7 64 bi and CS5 works fine.

A few common troubleshooting solutions:
Restart Photoshop and/or your computer.
Make sure your operating system and drivers, including your graphics driver, is up to date. (Check with the manufacturers website).
Reset Photoshop's preferences: http://forums.adobe.com/message/4209421#4209421

I have and Access is denied. You do not have sufficient privileges in CS4 error message when trying to change a directory name in CS4

Hi I keep getting this message in CS4 (access is denied. You do not have sufficient privileges)
Can anyone help to gain privileges?
Daryl

Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?

F-04: give error message when clearing AP items with payment block key(R)

Hi all,
Customer wants to prevent payment for AP items with payment block key(BSEG-ZLSPR) .
I want system giving error message when doing payment clearning with t-code:F-04.
How can I realize it ?
Thanks Grus!
Lynn

Please configure the following nodes properly:
Financial Accounting>>Accounts Receivable and Accounts Payable>>Business Transactions>>Outgoing Payments Global Settings>>Payment Block Reasons>>Define Payment Block Reasons & Define Default Values for Payment Block
For the error message: You may define a validation in OB28 with the help of ABAP consultant

Error message when doing HCM "change employee salary" on portal

Similar Messages

Maybe you are looking for