Error message when dragging wav files into iTunes

I am getting an error message recently "There is not enough room on '''' to copy all of the requested files. iTunes will copy as many files as possible." No files end up getting copied. I have a 60GB video with only 22 used. I have dragged files before with no problem. I have tried deleting some files that I don't really listen to and it will help to free up some space for one or two more files, but I shouldn't have to do this at this point. Any clues?
Compaq   Windows XP Pro  

Similar Messages

  • Error message when importing CD's into iTunes.

    I've just started getting an error message when importing audio CD's into itunes. +"Error occured while converting the file "........". The disk could not be read from or written to."+ I've been importing CDs for years now and this just started happening last night. The disk image shows up on the desktop, itunes opens and recognizes the disk and searches the database and finds the artist/track names/album etc. Then when I click the import button, I get this message. If I click on the disk image in the desktop and click on a specific file it will play through iTunes. No new changes except for maybe downloading the latest iTunes update. Any suggestions? Thank you very much in advance.

    Iron-Mike wrote:
    Every time I import a CD, mp3 is louder then AAC. It's just every so often if I try AAC the volume will be really low. Like barely hearable. Maybe it has to with the fact the CD was released long before AAC format was around? Something to do with compatibility maybe?
    Iron-Mike, MP3 and AAC were both invented well after CD audio and both algorithms are well aware of CD format. Make sure you have "Soundcheck" settings turned on both for iTunes playback and for CD burning. iTunes Soundcheck is supposed to normalize the volumes in spite of variations in the files. Many people have noticed that they don't really work very well, but having them on is better than nothing.

  • Error message when i plug mini into itunes

    when i plug the mini into the usb and itunes opens, i get an error message that says "the software requiered for communicating with the ipod is not installed correctly, Please reinstall itunes to install the ipod's software

  • Error message when attempting to import into iTunes

    A while ago a friend helped me put all of my music files onto an external drive. I recently purchased a second computer and was happily importing CD's, up until I migrated all data from my old computer to the new one. Now, when I try to import CD's (new ones that aren't even on the playlist referenced to the old computer and filed on the external drive), I get a warning that says "ERROR OCCURRED WHILE CONVERTING THE FILE (song title). THE REQUIRED DISC CANNOT BE FOUND.
    Is there some preference that might have been configured when the external drive was set up to receive the itunes music files, or???? Anyone have any ideas?
    Thanks!

    Hello RunnerGirl98,
    If you reinstall iTunes using this article, your songs will not be deleted. The Media in iTunes is stored in the iTunes folder, which is normally found in your Music folder and is not attached, or part of the iTunes application.
    It will be either one of these 2 articles depending on the OS version you have installed:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    I would also verify where your iTunes library is stored using this information:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Regards,
    Sterling

  • Error message when importing motion files into FCP

    In FCP.
    I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
    By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
    When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
    When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
    I go back to the training file to try the same procedure and it works fine.
    Go back to my own project and it doesn't work.
    Any ideas? Anyone?
    I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
    Also working with universal software for FCP studio.
    Intel 2.66GHz Mac OS X (10.4.9)
    Intel 2.66GHz   Mac OS X (10.4.9)  

    OK???
    Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
    I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
    I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
    Thank You Again!

  • I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison"

    I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?

    Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

  • I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

    I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

    What does the error message say? (Precise text, please.)

  • ITunes crashes when doing a power search. I get a Microsoft Visual C   Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025.  Pure virtual functional call.  If I select ok, Windows 7 pops up with iTunes has stopped working

    iTunes crashes when doing a power search. I get a Microsoft Visual C   Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025.  Pure virtual functional call.  If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down.  Anyone else every have this issue.  Any ideas on a fix?
    Thanks,

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

    I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

    This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
    "How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
    So if anyone has any more hints I'd be very grateful.

  • Got error message when store XML documents into XML DB repository, via WebD

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
    I got error message when store XML documents into XML DB repository, via WebDAV.
    I have successfully registered 5 related schemas and generated 1 table.
    I have inserted 40 .xml files into this auto generated table.
    using these data I created relational view successfully.
    but since I couldn't store XML documents into XML DB repository, via WebDAV
    when I query using below code:
    SELECT rv.res.getClobVal()
    FROM resource_view rv
    WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
    I got nothing.
    My ftp code is listed below:
    ftp> open localhost 2100
    Connected to I0025B368E2F9.
    220- C0025B368E2F9
    Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
    220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
    User (I0025B368E2F9:(none)): fda_xml
    331 pass required for FDA_XML
    Password:
    230 FDA_XML logged in
    ftp> cd /home/DEV/message
    250 CWD Command successful
    ftp> pwd
    257 "/home/DEV/message" is current directory.
    ftp> ls -la
    200 PORT Command successful
    150 ASCII Data Connection
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
    226 ASCII Transfer Complete
    ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
    250 SET_CHARSET Command Successful
    ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
    200 PORT Command successful
    150 ASCII Data Connection
    550- Error Response
    ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
    550 End Error Response
    ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
    I have tried all suggestion from another thread such as:
    alter system set events ='31150 trace name context forever, level 0x4000'
    SQL> alter system set shared_servers = 1;
    but failed.
    is there anyone can help?
    Thanks.
    Edited by: Cow on Mar 29, 2011 12:58 AM

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
    I got error message when store XML documents into XML DB repository, via WebDAV.
    I have successfully registered 5 related schemas and generated 1 table.
    I have inserted 40 .xml files into this auto generated table.
    using these data I created relational view successfully.
    but since I couldn't store XML documents into XML DB repository, via WebDAV
    when I query using below code:
    SELECT rv.res.getClobVal()
    FROM resource_view rv
    WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
    I got nothing.
    My ftp code is listed below:
    ftp> open localhost 2100
    Connected to I0025B368E2F9.
    220- C0025B368E2F9
    Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
    220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
    User (I0025B368E2F9:(none)): fda_xml
    331 pass required for FDA_XML
    Password:
    230 FDA_XML logged in
    ftp> cd /home/DEV/message
    250 CWD Command successful
    ftp> pwd
    257 "/home/DEV/message" is current directory.
    ftp> ls -la
    200 PORT Command successful
    150 ASCII Data Connection
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
    226 ASCII Transfer Complete
    ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
    250 SET_CHARSET Command Successful
    ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
    200 PORT Command successful
    150 ASCII Data Connection
    550- Error Response
    ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
    550 End Error Response
    ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
    I have tried all suggestion from another thread such as:
    alter system set events ='31150 trace name context forever, level 0x4000'
    SQL> alter system set shared_servers = 1;
    but failed.
    is there anyone can help?
    Thanks.
    Edited by: Cow on Mar 29, 2011 12:58 AM

  • TS1424 i'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • I cannot import 5.1 WAV files into iTunes

    Hello
    I'm running iTunes 11.1.5 (5) 64 bit on OSX 10.9.2. I'm trying to import some wav files into iTunes, they are about 6-11 minutes long each, they have 5.1 (6 total) channels, 16 bit depth and are sampled at 48,000 kHz. I can run them in QuickTime Player 10.3 (727.3) without any problems, but iTunes will not run them. This stil happens if I try to import the same files when they are in Apple Lossless format as well. I have several other surround sound files sourced from other stuff and they wil not import either, but they still run in Quicktime Player just fine. I don't have any pluging installed for iTunes or QuickTime Player. Does iTunes just not support surround sound audio, or is there something wrong with the files that I'm trying to import?

    Hi Michael,
    I bounced a PCM 5.1 WAV Audio File from Logic Pro X, This File alredy plays 5.1 surround from desktop just with the space bar preview and also with QuickTime ok? But Itunes 11 doesn´t import PCM 5.1 (multi) Wav audio files as you know, so I Knew that in the Itunes 11 for the movies tracks the 5.1 surround audio is automatic.See this link below
    http://support.apple.com/kb/ht4072 -
    What I did?
    I just imported my audio file to Apple COMPRRESSOR, and choose the H.264 output format and I changed from .MOV to .MP4 (This one Itunes import with multi audio 5.1)
    and also select 48 Khz and 720 Kbps. After encoding my audio file from ( 226 Mb) PCM 5.1 Wav about 4.20'  went to a AAC 6 channes 48 Khz / 720 Kbps  .MP4 file with 24 Mb size. Itunes import withou problem and played 5.1 surround as I wish.
    I hope you understood my explanation,
    Regards
    Paulo

  • Error message when compiling book "file is corrupt" referring to a photo.  Or "cannot find original photo".  Can you use photos that have been "edited" out of "Book Mode"?

    Error message when compiling book "file is corrupt" referring to a photo.  Or "cannot find original photo".  Can you use photos that have been "edited" out of "Book Mode"?

    I did copy it to my desktop, but it still won't let me open it.  I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go.  I was able to verify the disc, but that's about it.  My husband tried it on his iMac and we have the same issue.  It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking.  It just keeps saying the same message as I posted above.  I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes.  It's been too frustrating trying to open this folder on this cd she gave me.  She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • Error message when I want to update itunes in my miniMac?

    Whz I get an error message when I want to update iTunes. at first, all go well and in half of the download, it cut and says: error...
    what should I do?

    Download the installer through the iTunes tab at the top of this page.

Maybe you are looking for

  • Problem converting Integration Process to ALE logical system(acknowledgmen)

    Hello, I have a scenario where a sender SAP system sends an IDoc via an Interface Mapping to an Integration Process. This worked perfectly fine on our development environment, but after transporting the scenario to our quality systems I got the follo

  • Need advice about keyframe spacing (at least I think that's what is causing the issue)

    I have never noticed this ever happening before, I think it's because it's going from non-static to completely static images. It's a small tidbit at the end of an animation.  Once the credits start rolling, the video begins to pulse every second or s

  • Addition in JList???

    Can anyboty post a snippet on how to add numbers inside a JList? (the list accepts only numbers) In a textfield, the sum will be displayed. thanks

  • Question about online purcheses

    So is the due today price all I pay for activation and the phone etc etc and the monthly payment what I pay every month after that I'm trying to find out if I just pay the due today or If i have to pay both prices.

  • Mabook air lemon - how do I resolve it?

    I am trying to find out what to do about my recently purchased macbook air. I bought it on march 7, 2010. On march 18, it would no longer turn on. I tried leaving it off for a day. Plugging it into a different location, etc. I spent time online to fi