ERROR MESSAGE WHEN EXPORTING TO PDF

Hello, I am trying to export an InDesign file to a PDF, Pre-press quality, and when I think it is going to finish exporting I get the attached message.
I have my printers on standby and would appreciate any assistance.

turn down the little triangle next to the 'red' error message--you sholud then see what the (2) problems are

Similar Messages

Error messages when exporting,from pdf to word or excel

i am trying to export a bank statement from pdf to excel after scanning.
the error message i get is ;damaged document,or internal error.
what do these messages mean,and how do i fix the problem?
thanks

Good day,
Are you getting this error when you're trying to open the scanned document in Adobe Reader?
If so, does the file have a .pdf extension on it?
-David

Error message when exporting to pdf from illustrator

When I transfer from ILLUSTRATOR to pdf I get an error message saying no program associated with PDF but I have already set acrobat pro as the default program. I can click close and it will download the file; however, once it is downloaded I cannot open the new PDF file. This is very frustrating.

Hi,
I am moving your posting to Illustrator Forum from Acrobat.com Forum.
Thank you
Hisami

I receive error message when exporting or converting pdf to word

i receive error message when exporting or converting pdf to word

Me too and I cannot find online support of any kind. It was hard enough to get to find this forum. Is there a tech support chat or phone number anyone can provide? Thanks!

I receive an error message when submitting a pdf file for conversion to a Word document "... an unex

I receive an error message when submitting a pdf file for conversion to a Word document "... an unexpected error has occurred..." - is there a way to overcome this error?

I received your Scan.pdf sent to [email protected] and had no problem to convert it via Export PDF service. Could you try again?
Jyh-Jiun Liou

Error message when exporting

keep getting error message when exporting 12 min project from premier pro ,
never had this problem.
Adobe tech used remote access to assist me with something and changed settings etc.

WHAT error message?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Error message when saving a PDF to PNG: Error attempting to write file.

I get an error message when saving a PDF to PNG. JPG and TIFF works, but no PNG.
Disk space is sufficient! 100GB of 250
A few weeks ago it was no problem to save as PNG. But now! (Perhaps from last update?)
Messages:
When clicking "Ignore":
Adobe Acrobat XI Standard
Version 11.0.09

I have this issue too, but my colleagues do not have this issue(we have same Acrobat Pro 11.0.09). I am sure this issue happens only you updated to 11.0.09, because when you use Windows Restore back to 11.0.08, no issues.

ICC error Message when Exporting PDF

I hope someone can answer this for me, I searched the web and could not find anything like this. The Newspaper I work for had their Ink supplier create a custom ICC profile for their press. I set up Indesign to use the profile in the color settings as well as when exporting to PDF. Now when I export I get a error message stating "Version 4 ICC Profiles will be converted to Version 2 ICC profiles during PDF Export" most of the time the color on the pdfs come out fine, but there have been a few where the color changes/shifts. Does anyone know why this message appears and is there a way to fix it? I will be doing alot of testing to see if I can get the message to not come up.
Thanks
-Dustin Bell

I'm not sure you'll find exactly the answer you are looking for, but there's a lot of information accessible through this search:
http://www.google.com/search?q=%22icc+profiles%22+%22version+4%22
It's some sort of incompatibility issue with the new standard.
Peter

An error message when exporting pdf to word

there is an error message when I try to convert a pdf into word. please advise

What error message did you receive?

Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
It think it gives this error message when i reach 24% everytime during export.
So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
Taphabit

boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
is there any way of preemptively avoiding it in future projects?
thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

Unable to create volume - error message when exporting

Hello - relatively new Mac and iphoto user here.
I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over. What's going on? I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
I would move them to my external hard drive but I'm having trouble with it too. It won't even show up. When I run a disk utility on it it says it can't be verified. Sigh. So that's a whole other issue that will probably take something like Disk Warrior to clean up.
In the meantime, I'm trying to move images to the thumb drive then I'm putting the thumb drive in my other computer and moving the images from the thumb drive to it's external hard drive A long process when you can only move about 20 images at a time from iphoto.
I'm just trying to move a good bit of old photos out of iphoto on the Mace because I'm scared that the program or even my entire computer is going to crash and I'm going to have data loss.
What can I do about the "unable to create volume" message? And what's with the "file in use" error message when I try to move the images off a file folder on the desktop.
Is there a better way to move 1GB of photos all at once to the thumb drive?

Welcome to the Apple Discussions.
Seems to be two issues complicating things here:
I'm trying to export photos from iphoto to a 2 GB thumb drive. I keep getting the error message "unable to create volume" when I try to move anything but very small batches of photos over.
What format is that wee drive? Mostly there are FAT16 or FAT 32 and there is a limit to the number of objects they can have on the root of the drive. The workaround is to export to a Folder on the desktop and copy that over.
Which brings us to:
I tried to create a folder on my desktop for the photos but then when I try to move from there I get an error message telling me the photo "is in use" and can't be moved to the thumb drive.
You will sometimes get this message when you try to export two files +with the same name+ to a Folder. As you know your camera is well capable of producing many files called something like DSC_1234.jpeg. In iPhoto these will be in separate folders, so no problem. However, when you go to export them to the Folder on the desktop if iPhoto continues the export one will overwrite the error.
Solution: Give the Pics a title (Photos -> Batch Change) and a sequential number. Then when you export, in the export dialogue you have the option to use the Title as filename.
Regards
TD

Error message when exporting to qt, Please Help!!

I am getting file I/O error message when trying to export a 52 minute wedding project to quicktime. I tried different quictime settings, but nothing helps. Please hep me out with this issue it is driving me crazy.
Thanks

Ok, I have trashed my final cut preferences, I checked and my external hard drive is set to mac osx extended. I ran disk utility, I exported to quicktime movie using current settings with movie self contained checked and I get the error message right away. Then I did it without self contained checked and it goes to 21% and I get the error message. Everytime it says this: File I/O error, that is all it says. What does this mean? What can I do next? I have a deadline for this project. I have alot of memory left on my external hard drive. This has never happened before. Thanks for all your help guys.
D.T.

Error message when exporting as html

Does anyone get this message when exporting to html?
MuseJSAssert: Error calling selector function:SecurityError: Failed to read the 'contentDocument' property from 'HTMLIFrameElement': Blocked a frame with origin "null" from accessing a cross-origin frame.
I get this ever time. I am on a mac and have two macs for developing and both macs give me this error. One is running OS Mavericks, the other OS 10.6.8

Hi,
Try this discussion Re: Oam file in Muse generate error
If you still have any issue, please let us know.

Error 541 when exporting to PDF

Post Author: BCLin
CA Forum: Other
Hi,Our application is using Crystal Report VCL (version 9) component for exporting reports.I have a customer reported that he got an error message "Not enough memory for operation" when exporting the report to PDF. I opened the .rpt file sent in by the customer in XI, and tried to export the report in XI to PDF, failed due to "memory full". By deleting something in the report header and reset the database location, it now can be exported within XI, but it is still failed to be exported to PDF through my application, the error message is changed to "Error: 541 Error detected by export DLL...", but it is no problem to export other .rpt files through my application. It seems there are differences between those .rpt files cause above problems, but what are they? Can somebody here tell me what do I need to check to find out the differences? Thanks in advance.

turn down the little triangle next to the 'red' error message--you sholud then see what the (2) problems are

Firefox crashes when I try to attach a file. Seems related to second problem, receive error messages when opening a pdf in adobe (which I've reinstalled twice)

Crash report:
bp-74bcae4f-7091-4121-a809-5d0a12140616 is the crash report.
I have a Toshiba.
When I open my email (gmail, school email) and try to attach a file, firefox immediately crashes and gives me two error messages. first one is a WerFault, i think. I don't know if that's relevant.
Apart from these crashes in Firefox, I am also having the same problem when trying to view or open a pdf in adobe reader, or even open adobe reader itself. It won't try to open, I just receive the error messages. I've uninstalled and reinstalled it two times now. I did this thing suggested online where you go into the control panel and look at all your plugins. Then, "repair" adobe reader - pretty sure it's just a button that says repair. that didn't do anything, of course I also could have done something wrong.
I realize this could be a problem unrelated to Firefox, but I'm doing what I can before I take my laptop in.
Please save me.

Ok two things based on the crash report and the steps you took right before the crash:
# Try to disable scrolling acceleration and restart Firefox. Does it continue to crash?
# Try Safe Mode and do the same task as above with email and the pdf [[Troubleshoot Firefox issues using Safe Mode]]
# Also pdf.js may be helpful to read pdfs in the meantime. You can change the default reader in the Preferences/Options > Application menu of Firefox.
# Try to clear out the downloads folder and update flash to version 14 (that should do it)
IF it crashes again please also provide the new crash signatures and we can take a look :-) Sorry for the crashing :-(

ERROR MESSAGE WHEN EXPORTING TO PDF

Similar Messages

Maybe you are looking for