Error message when I connect iPhone to my MacBook Pro

When I connect the phone to the computer I get this error message:
iTunes could not connect to this iPhone because an unknown error occurred (0xE800006B)
And my photos in the iPhone keep opening iPhoto every few seconds.
It's very irritating when I just want to charge the battery.
When I sync it seems to sync ok.

Thanks for your help.
Nothing has solved the problem until...
I downloaded and itunes update the weekend.
When I plugged in my iphone to sync and charge it, the error message and photo problem has stopped.
Don't know if itunes was the solution but it seems to have stopped.

Similar Messages

  • Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.

    Recently when I connect Iphone 4s and MacBook Pro my computer stopped see new photos on Dropbox.  I have changed iCloud password on Mac and Iphone, nothing.  Deleted some pictures of iPhone, didn't help.  Any ideas what I did to mess this up?

    I cannot deleted.  Computer keep telling that my dropbox is open.  Don't see how to shot it off.  Do I need to delete all pictures from dropbox first and delete application after.  Will I loose all these pictures? Usually, I copy all photos to iphoto app.

  • Error message when trying to install Mavericks onto macbook pro.

    Hi Been trying to install Mavericks onto my macbook pro (10.6.8) but the install fails after 3-5 minutes and I get this error message: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    I have tried to repair the drive through the utility function but I am told it cannot be repaired. I tried the recovery function as well but whilst I am able to select the source (external hard drive with recent time machine backup) the next screen prompts me to select the disk to restore but all it does is search for a drive and there is none there to select.
    Really not sure what else to do. Please help!

    Well some progress has been made so thought i would post what I did, in case someone experiences the same issue I did and maybe this will be of use to someone else...
    Ended up force-shutting my macbook down then switching back on, as soon as the chime could be heard i pressed command R and kept both keys pressed until Recovery mode kicked in.
    Internet Recovery came on which took approx 20 minutes (more about this here http://support.apple.com/kb/ht4718 )
    Then 4 options appeared
    1) recover with time machine back up
    2) set up and install Mac OSX (with the Lion icon and reference to Lion for some reason, I had Snow Leopard to begin with)
    3) get help online
    4) repair or erase disk using disk utility
    I decided to attempt to repair the drive but use the verification tool first which said the drive was fine??????!!!
    Then clicked on repair disk, this took only a few minutes then it stopped after a couple lines.
    While it was "repairing" the button changed to "stop repair" then changed back to "repair" so I took that to mean it had done what had to be done.
    Then closed the utility screen whch prompted me to restart macbook after selected a drive to boot up from (only one option came up for me)
    Did that and I was back into familiar territory and on my mac as I knew it ie snow leopard.
    I did restart macbook just to make sure and it just booted up as normal, to snow leopard with the maverick install icon still showing in the dock.
    Panic over. Not sure if / when I will give installing Maverick another try though....

  • I get error message when trying to delete files on Macbook Pro.

    I am trying to delete files on my Macbook Pro, Mac OS X Version 10.6.8 -  I get this message: "The operation can’t  be completed because an unexpected error occurred (error code -50) "  This is a folder.  Under Finder/Get Info I have unlocked the padlock in lower right corner, and the padlock box is not checked.
    Please HELP!

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

  • I get an error message when I connect my 6g nano saying that it cannot be synced then the number 13019

    I get an error message when I connect my 6G nano saying it cannot be synced then the number 13019?

    Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

  • I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

    I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

    Hi ChristianHelpplz,
    Thanks for visiting Apple Support Communities.
    It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
    I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
    Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Restart your device
    Restart your iOS device or reset your iPod.
    Restart your Mac
    Turn your Mac off and back on.
    Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    From:
    If you don't see your connected device in iTunes for Mac - Apple Support
    If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    Jeremy

  • GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    Hi uckldag,
    Please try uninstalling using Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) and check.
    Regards,
    Rave

  • Can't save my illustrator files. I keep getting "unknown error" message. Using version 6 on a macbook pro. OSX 10.9.5

    Can't save my illustrator files. I keep getting "unknown error" message. Using version 6 on a macbook pro. OSX 10.9.5

    42nato,
    You may try the list (skip 5) in this case).
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • The restriction code is on my Iphone and I didn't set it up. Could I have done something when tethering the iphone to my MacBook Pro through settings in the MacBook?

    The restriction code is set on my iPhone and I didn't set it up. Could I have done something when tethering the iPhone to my MacBook Pro through settings in the MacBook? I'm a new iPhone user. thanks

    answered

  • Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor

    Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor.
    On SOUND preferences, I don't have the option for chosing HDMI on the OUTPUT sound.

    Do you have another HDMI port that you can switch to on the TV? Is the tv source on the matching HDMI port with the volume up? After checking those try the following:
    PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
    SMC Reset: http://support.apple.com/kb/HT3964

  • I recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

    i recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!

    So it is cutting off the end at 59 minutes?  How large is the file that is being exported?  You may be running up against a file size limitation.

  • Error message when syncing new iphone

    I am unable to sync my new i phone. every time I try an error message pops up and says you do not have the privilage to make changes.
    Any suggestions???

    I actually figured it out a while ago.
    Turns out it is not an issue with the iPhone or iTunes.
    By process of elimination I deduced it could be a permissions issue with the hard drive and/or folder that holds the contents of my Music Library.
    For example, if the "Sharing & Permissions" settings (found in the "Get Info" Window) are set to "Read Only" on the internal or external drive that contains your Music Library for iTunes then you can not write to the disk. Therefore, you do not have privelges to make changes to the internal or external drive and you get the error message when you try to sync with the information on that drive.
    Here's the kicker and million dollar questions:
    How did the "Sharing & Permissions" settings get changed on my Hard Drive without me doing it?
    Why did my iPhone sync fine yesterday and suddenly today the Hard Drive is doing this?
    I have to set all priveleges to all drives to "Read & Write" and that just doesn't seem very secure to me.

  • Error message when syncing with iPhone

    Since upgrading my OS this week, I've consistently got an error message when syncing playlists with my phone. See below:
    Can anybody help? Most of these tracks are purchased through iTunes

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes: Troubleshooting issues with third-party iTunes plug-ins

  • HT1386 Problem connecting Iphone 5 to Macbook Pro

    My usb-doc has been broken in my macbook pro since a year now. Recently, i bough the iPhone 5. To connect my iPhone with my macbook pro trough Wifi, i need to connect it first with the USB-cable. But this is not possible now. Is there any solution?  thx (sorry for the bad english)

    Well, They are. All the rest of the ports (sd, firewire800, ...) are working. I've tried 'rebooting' them, but there was water involved... Do you really need to connect With USB in the beginning?

Maybe you are looking for

  • Creation of sequence and trigger for each table!!!!!!!1

    Hi I am new to trigger and Sequence field. In one of my database we have many tables with fields for specifing ID numbers. Iam planning to insert the ID field with help of a Sequence and trigger...that trigger fires by adding the sequence value from

  • DSTv4 update in the 10.2.0.4 patchset

    Hi, We are planning to upgrade our 10.2.0.1 database running on Linux x-86-64 box to 10gR2. So we need to follow 1.Upgrade to 10.2.0.4 2.Upgrade to 11gr2 Our current time zone version is 2. Immediately after 10..2.0.4 upgrade, i want to continue upgr

  • Apple TV wifi indicator light

    When did the green, wifi indicator (in lower left corner) get added? And how can you get rid of it?

  • Does iPad 1 support Facetime?

    Hello, I know the 1st gen iPad doesn't have the cameras. But is it still possible to support the Facetime, I mean to receive the video/audio from the other user and send only audio out? Thanks!

  • Using a remote repository

    Hi All, We have our repository created on a centralized server and want to use the connect from the client machines. Tried searching for the ways/configurations to write the placeholder queries for a remote repository to no luck. Kindly help. Regards