Error message when I open Logic Express 7

Hi!
When I opened Logic Express 7 today, I got an error message, telling me that Logic had problem with the file com.apple.logic.express.cs.
I then searced the net and found out that the problem could be solved if I deleted that file, so I tried that (I didn´t deleted it, but just removed it to the trash, so I could replace it back if Logic wasn´t fixed with the file removed). And Logic was still not working. No sound when I tried to play back my songs or when I tried to play with the audio instruments. So now I have just replaced back the com.apple.logic.express.cs file, since that did not seemed to be the problem.
I also tried to remove the com.apple.logic.SetUpAssistant.standard.plst file, but that did not seem to help either.
Have anyone here experienced the same problem?
PS. Why is the solution to remove those files to get it work, when they are ment to be there in the first place?
Best from Asle
Composer/guitarist from Norway

Hi!
Thank you for the answer!
Will all the songs I have made in Logic be safe and still be 100 % as before if I reinstall Logic?
Asle

Similar Messages

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

    I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

    I should also add that I am using core audio, no external MIDI device and Garageband v 6.0.5. Thanks

  • I am getting this error message when I open Safari.  How do I make it go away?  "Error Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(.  As a precaution, it has not been loaded.  ?

    Error
    When I launch Safari on my MacBook Pro
    Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(.  As a precaution, it has not been loaded.  Please contact the plugin developer for further information.
    I am getting this message when I open Safari.  How do I make it go away?
    Thanks, Ed Williams

    To Remove plug-in
    1.) Open the SplashID desktop app
    2.) Navigate from Menu bar "File" -> "Plugin for Safari" -> "Uninstall".
    I could not find it in either Library/Internet Plug-ins nor ~/Library/Internet Plug-ins as others have suggested.
    Cheers!

  • I get an error message when I open Lightroom

    I get an error message when opening Lightroom"Lightroom has encountered an error when reading from its preview cache and needs to quit.
    Lightroom will attempt to fix this problem the next time it launches"  the problem does not correct when re opening lightroom

    Are you getting the exact same message as was stated in the first message in this thread? Have your operating system search for a file whose name ends with .LRCAT, but do not delete this file. Delete the Previews.LRDATA that is in the same folder.
    Or are you getting a different message?

  • I get this error message when I open Firefox and when I go between tabs TypeError: PC_PREF_OBJ is undefined

    I get this message when I open Firefox and when I go between tabs.
    TypeError: PC_PREF_OBJ is undefined
    I have tried to re-install, but that doesn't help.

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]].
    Extensions can sometimes be the cause of problems. If the problem does not occur in [[Safe Mode]], then you can disable your extensions one-by-one until you find out which one is causing the problem.
    See [[Troubleshooting extensions and themes]]

  • Drive restriction group policy causes error message when accessing Open and Save As Dialog Boxes on Windows 8.1

    We are running Windows 8.1 Pro x86
    I am really curious as to why the drive restriction group policy causes the error message to pop up:
    "This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator."
    It does not prevent from actual saving so functionality is not lost but it really annoys our end users and we're getting a lot of complaints. We cannot use the workaround of hiding drives instead of restricting as this still presents security issues. This
    is happens when saving (or clicking on a button like "Browse" that opens the 'Open' dialogue box) in all Office 2013 applications, Internet Explorer, Paint, Notepad, and probably most others. I've looked at many forums and no suggestions for workarounds
    have succeeded for us to get rid of this error message and in fact, I read a post that stated that someone contacted Microsoft and they said this was by design and there is no workaround. I find this very unfortunate that we either have the choice of compromising
    security or annoying our end users. It seems to me like the new dialogue box in Windows 8.1 (and maybe 8?) attempts to access the local drive under the logged in user's account before it actually opens up the dialogue box which conflicts with the group policy
    that restricts access to the drive.
    Has anyone at all had any luck getting this to go away without removing the restrictions? It seems like the answer is either buried in the Windows code or somewhere in the registry.
    Thank you in advance for your time!

    Thank you for your time and response! Unfortunately, we have the machine locked down pretty tight (they are public use computers that require heavy restriction) and it is set to restrict all drives so access is limited to the local profile. We did try
    testing your method, however, by adding the Desktop as an allowed location in the Office policy (which would not solve the issue for the other applications but was good for a test) using the path %userprofile%\desktop. When choosing that location, it does
    not throw the error but unfortunately, it does not remember like it did for your with the E: drive so it still always throws the error when first loading the dialogue box no matter what I do. If you're able to confirm that this is simply by design and we're
    just expected to inform our users to click through the errors, then I guess that's the accepted answer. Although, do you think that there might be a registry key value that is set after you save to the E: drive for the first time? Maybe we could set that value
    to %userprofile%\desktop if it's doing the redirection after the first save through registry. Thanks again!

  • Error message when starting Sun Studio express IDE

    When I start the Sun Studio express IDE version 3/09 I get the following error message:
    java.lang.IllegalArgumentException: Instance_urn = urn:st: already exists in the registration data.
         at org.netbeans.modules.servicetag.RegistrationData.addServiceTag(RegistrationData.java:343)
         at org.netbeans.modules.servicetag.RegistrationDocument.addServiceTags(RegistrationDocument.java:304)
         at org.netbeans.modules.servicetag.RegistrationDocument.load(RegistrationDocument.java:126)
         at org.netbeans.modules.servicetag.RegistrationData.loadFromXML(RegistrationData.java:433)
         at com.sun.tools.swdev.sunstudio.registration.SSServiceTagSupport.getRegistrationData(SSServiceTagSupport.java:257)
         at com.sun.tools.swdev.sunstudio.registration.SSServiceTagSupport.getSSServiceTag(SSServiceTagSupport.java:306)
         at com.sun.tools.swdev.sunstudio.registration.SSServiceTagSupport.createSSServiceTag(SSServiceTagSupport.java:157)
         at com.sun.tools.swdev.sunstudio.registration.SSInstaller.restored(SSInstaller.java:97)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:419)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:340)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
    [catch] at java.lang.Thread.run(Thread.java:619)

    Hello!
    I googled "SSServiceTagSupport.java:257" and found out that it is filed as IZ 154094 against Netbeans:
    http://www.netbeans.org/issues/show_bug.cgi?id=154094
    Actually it was reported many times:
    http://www.netbeans.org/issues/show_bug.cgi?id=151921
    It suggests a few workarounds.
    Workaround 1:
    "Simple workaround is to disable registration using command line option -J-Dnb.registration.enabled=false"
    Workaround 2:
    "The file ~/.netbeans-registration/6.5/registration.xml is empty, so I have this file erased and restarted the IDE.
    After this step, the file was not regenerated, but the IDe starts now without this problem."
    Please, try one of them.
    Thanks,
    Nik

  • I keep getting a error message when I open iTunes asking me to reinstall the 64 bit version. I have reinstalled but still get the message.

    When I open iTunes I keep getting a error message asking me to reinstall iTunes 64 bit version. I have reinstalled but still get the message. Does anyone know a fix for this?

    This is obviously a problem apple! Please look at your community boards and see that a number of people have issues with the latest update and sort out.
    I have tried a number of times to install the update and have failed getting the same message as you. Tried with the 32 bit instead & no luck. Ive come on here to see if anyone else has a solution & found we all have the same problem. Someone else tried the old uninstall reinstall trick to no avail. Please sort this out apple!!

  • Hi, I am getting an error message when I open Safari. I have a Screen Shot but am unable to upload here. Any suggestions?

    Hello there , when I open my Safari I get this error message. Its very annoying.Can someone help me with it ? Please. Thanks

    First, check that your home page is what you think it is. If so, quit Safari and then relaunch it while holding down the shift key.

  • Error message when I open Dreamweaver files

    Hi,
    I have troubled of Dreamweaver CS3 and hope some one can help
    me. When I open a file from one of my site which is connecting to
    database, I got error message that I have to close the Dreamweaver.
    It doesn't tell much what exactly wrong at the error message. These
    sites were working fine before. Any idea why this happen and how
    can I fix it?
    Thank in advance!
    Kenneth

    Not without a little more information. What server model are
    you using?
    What OS do you run? Can you provide connection code and
    recordset code?
    Lastly, what version of Dreamweaver did you create your pages
    in? If it was
    8, was it updated to 8.02?
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "takcw" <[email protected]> wrote in message
    news:fj5um4$l7g$[email protected]..
    > Hi,
    >
    > I have troubled of Dreamweaver CS3 and hope some one can
    help me. When I
    > open
    > a file from one of my site which is connecting to
    database, I got error
    > message
    > that I have to close the Dreamweaver. It doesn't tell
    much what exactly
    > wrong
    > at the error message. These sites were working fine
    before. Any idea why
    > this
    > happen and how can I fix it?
    >
    > Thank in advance!
    > Kenneth
    >
    >
    >

  • Error message when Safari opens

    Why does the following message appear when i start up safari and how do I stop it?
    Error message is:
    Community Toolbar
    We are sorry, but the browser version you are currently using does not support the community toolbar.
    This only started to appear since installing updates.

    No problem.
    Open a Finder window. Select your MacintoshHD in the Sidebar on the left.
    On the right open the Library folder.
    Now open the Application Support / InputManagers / Receipts folders. Move the files in *bold" I posted before to the Trash.
    Then in that same Finder window select your Home Folder in the Sidebar. It has a small house icon.
    Then open the Library folder then the Application Support folder. Move the Conduit file to the Trash.
    When you are finished, relaunch Safari.

  • I get the error message when i open Illustrator file.Is there a way to repair this file?

    Hello everyone. I need help.
    I have an Illustrator file that I created and then saved.When I tried to reopen the file I got the error message
    Offending operator: Bg
    Context:
    -293.6436 3.81445 -303.502 -12.5605 -314.9639 -24.0186 c
    Bb
    1 (Unnamed gradient 2) 0 0 90 1 1 0 0 1 0 0 Bg
    Waiting for reply.

    Eneas,
    This is a case of file corruption.
    One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
    Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    http://www.illustrator.fixtoolbox.com/
    As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
    External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Maybe you are looking for