Error message when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me below error message,

Error message "Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit."
when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me above error message,
In the log it shows
Request to office.com with the following URL:https://hostname/sites/appcatalog/config15 caused an exception. 
System.Net.WebException: 
Request to office.com should be routed with url URL:http://office.microsoft.com/client/15/commerce/query  but 
 request to office.com is sent with following URL:https://hostname/sites/appcatalog/config15
and the Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError'
An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.  
Feature "Apps that require accessible internet facing endpoints" activated in the Central Admin  .
kindly help on this issue

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Check whether the App management shared service add to the Farm, and we need to configure the Subscriptions setting service also.
2. SharePoint Server IP Address excluded from the Websense.
3. Restart the server.
4. Please check as the link below.
http://www.naumanahmed.com/2012/07/sharepoint-2013-app-management-service.html
More information:
http://msdn.microsoft.com/en-us/library/fp179919.aspx
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

  • TS1538 When I try to connect to i tunes I get the following message 0xE8000003 any ideas anyone

    When I try to connect to i tunes on my xp run pc I get the following message 0xE8000003 any ideas anyone driving me mad

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

    i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

    sos1der wrote:
    pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
    You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
    sos1der wrote:
    but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
    That's an entirely different issue, unrelated to your iOS devices.

  • I just downloaded itunes and get an error message (-3212) when I try to connect to the store.  I have an hp pavillion using Windows 8.1

    i just downloaded iTunes for my Windows 8 laptop and get an error message when i try to connect to the iTunes store (-3212)

    Hello Steve,
    Thank you for the details of the issue you are experiencing with the iTunes Store.  I recommend the following steps for error (-3212):
    "Error 3000" through "3999"
    Alerts with codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, or due to your Internet proxy settings. If you are using a proxy, try removing the proxy settings, or using a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues.
    Find the full article at the following link:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    The problem has been fixed with the most recent OS X software update.

  • When i try to connect my iphone to itunes it comes up with a message saying "itunes could not connect to this iphone, an unknown error has occured (0xE8000012) any ideas on how to deal with this problem??

    When i try to connect my iphone to itunes it comes up with a message saying "itunes could not connect to this iphone, an unknown error has occured (0xE8000012)
    i have recently bought  new laptop and downloaded/installed the newest itunes and this has happened.. any ideas?

    read
    Error -50
    Delete Storm Video, QuickTime, iTunes, then reinstall iTunes. See also KB TS1583for error -50

  • HT2292 When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)

    When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)

    Let's try the following document with that one:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

  • When I try to connect to App Store,I get an error message stating "cannot connect to iTunes Store.  I show 3 bars on wifi connection

    When I try to connect to App Store, I receive an error message stating, "cannot connect to iTunes Store.  I show 3 bars on my wifi connection?  Can someone help...why if I tap App store, does a iTune error message display?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • When I try to connect my iPod touch I get an error message that the "phone" is not recognized, unknown error 0xE8000084.  Help

    I am using my husband's old iPod touch and when I try to connect it to iTunes I get that error message.  It is recognized in my computer as unspecified under Devices and Printers

    Thanks.  I had searched for that error message but had the whole number and nothing came up.  I followed the directions and now it is recognized.  The only thing I hadn't done before was to disconnect my external hard drive.  Go figure.

  • I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

    I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

    Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.

  • HT1420 When I try to connect to itunes match, I get an error message that says "We could not complete your iTune Store request.  An unknow error occurred (4001).  How do I resolve this issue?

    When I try to connect to itunes match, I get an error message that says "We could not complete your iTunes Store request.  An unknown error occurred (4001).  How do I resolve this issue?

    I purchased iTunes Match several days ago and I am getting the following error when I try to allow iTunes Match to run.  Please advise how to fix this:

  • Error message displayed when i try to connect to sql*plus

    I get the following error message when i try to connect :
    ERROR:
    ORA-12560: TNS:protocol adapter error
    I have tried :
    sys/change_on_install
    scott/tiger
    system/manager

    There are a few causes for this error. For example
    I get it if I have not started my local database on
    Windows.
    There are lots and lots and lots of suggestions and information
    on Usenet (search on groups.google.com) and on the web that
    should help get a background feel for the problem. I appreciate
    most are written with the expectation that the reader already
    knows Oracle, which may not always be the case; at least
    they will help you explain what you have done and tried
    if you need to ask more help here.
    -- CJ

  • Ipad Locked(forgotten passcode) and error message when I try to connect to itunes

    Ok so I've forgotten my passcode to my Ipad. I have tried too many times so now the screen says Connect to itunes. When I try to connect it there is a error message saying: Cannot connect to itunes becuase it is locked with a passcode. I have never used this itunes computer with my ipad so I haven't synced or anything. Is there anything I can do to  unlock my IPad? Thanks in advance.

    If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Follow the instructions for putting the device in recovery mode >  iPhone and iPod touch: Unable to update or restore

  • Cannot connect airport express to ipad I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    cannot connect airport express to ipad
    I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
    Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
    I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
    BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
    I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
    So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
    Since I have had this Airport Express I have spent many hours trying to get it to work.
    It works just long enough to fool me and then takes a dump...
    Maybe this time?
    5 Minute later...
    Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
    [An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
    Wonderful Green LED though. Totally useless piece of equipment AFAIK.
    Message was edited by: Daniel Shattuck

Maybe you are looking for

  • Data Selection tab in infopackage

    Hi Gurus Its a very basic question but can anybody tell me what function the "data selection " Tab does in infopackage? I know the setting required on R3 side for that but not sure why we use the data selection. Can we use this data selection for mas

  • Is it possible to make a Final Cut Template?

    The idea in my head is a little vague right now so suggestions are appreciated. My church is looking to post our sermons online. My goal is to make the workflow process as seemsless and simple (read: volunteer friendly) as possible. The editing will

  • Sample rate (X_Value) is wrong

    On one particular PC i recorded: X_Value 0 1.000122 2.000243 3.000365 4.000486 5.000608 6.00073 7.000851 8.000973 on every other PC i recorded: X_Value 0 1 2 3 4 5 6 7 8 Just have a simple timed while(1000ms) loop around a "Write To Measurement File"

  • What does could not find com.apple.ReportCrash.Self mean

    What does " could not find com.apple.ReportCrash.Self" mean

  • Array of texfields

    I can't work out how to create an array of textfields and populate a container with them. I'm using AS3 but it may not be as3 specific issue. Creating the array of textfields is the problem, the rest (addChild, x,y) should be ok.