Error message when I try to stream iTunes over Airport Express

When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

Similar Messages

  • I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison"

    I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?

    Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

  • I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

    I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

    What does the error message say? (Precise text, please.)

  • Getting an error message when I try to download ITunes 10

    I am getting an error message when I try to download ITunes 10.  Can someone assist

    Try here...   iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • HT1349 I am getting an error message when I try to open itunes on my desktop computer: "the folder "itunes" is on a locked disk or you do not have write permissions for this folder"...any ideas?

    I am getting an error message on my desktop when I try to open itunes: "the folder "itunes" is on a locked disk or you do not have write permissions for this folder"...Any idea what  I need to do to correct?

    Hi lvdmerwe!
    I have two articles here for you that should be able to help you troubleshoot this issue further:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Error Message when I try to open itunes

    When i try to open itunes it gives me the error message "Windows cannot access specified device, path or file. You may not have the appropriate permissions to access the item" It was working fine yesterday afternoon and this morning i got this message.

    I didn't mean do the devices work, I meant does Itunes work if they are plugged in.
    Could you confirm that you have a default installation of iTunes and that you do not use the server for itunes?
    If not then it sounds like something got corrupted and may be it is worth trying a full removal of iTunes and related programs followed by reinstall.
    Here is a method for doing this including cleaning up if any of the uninsatlls fail. *if you are unable to delete any of the recommended files or folders report back with details*.
    == uninstall with cleanup ==
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Save the files on your PC.
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
    http://support.microsoft.com/kb/290301/
    (To run the program – All Programs>>Windows Install)
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.
    ===

  • Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

    Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes
    If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
    iTunes for Windows: Troubleshooting CD issues caused by device filters

  • HT5649 I get an Itunes support error message when I try to download itunes to my new pc....

    I get an error message when I am trying to download iTunes to my new PC and it leaves the download incomplete and iTunes not usable

    http://www.apple.com/support/itunes/install/

  • HT204406 I have received an error message when i try to start iTunes Match, "We coulnd not complete your iTunes Store request.  An unknown error occurred (4001).  Can you help with this error?

    I subscribed to iTunes Match, but after the information is gathered about my iTunes library, i get an error message :  "We could not complete your iTunes Store request.  An unknown error occurred (4001).  Try again later." 
    Can you help fix this error?

    Yesterday I went to settings in my iPhone, Music, turned iTunes Match to "Off".  I then updated Match in iTunes and it worked!  I don't know why, but it worked.

  • Runtime error message when I try to open iTunes on my PC - R6034

    Hello I have been trying to open iTunes on my PC and I keep getting the following error message:
    Program C:\Program Files (x86)\iTunes\iTunes.exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly
    Please contact the application support team

    Version 11.1.5.5 of iTunes was just released today. If you update to that, can you launch iTunes now?
    http://www.apple.com/itunes/download/

  • Error message when I try and open itunes

    Hi , When I try and double click on itunes to open it. I get a error message that says "itunes has encountered a problem and will have to close we are sorry for the inconvience" and then there is a option at the bottom to send a error report. How do I fix this Please Help !
    Thanks,
    lizabler
      Windows XP  

    hi SENSEIMACK!
    error number:0x80040707
    description: DLL function call crashed: QTInstallCode.code.QuicktTImeUnInstallProc
    that's a known complication of a broken QuickTime. in this context, it usually means the installation configuration information of the QuickTime has been compromised.
    here's what we'll try first.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of leftover QuickTime program files and folders.
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    once we've got all the existing QuickTime scraped away, let's try another careful standalone QT 7.1 reinstall. (the link i gave above to lizabler actually goes to a 7.1 standalone ... that showed up for us yesterday afternoon.)
    does it go through properly this time? if so, does your itunes launch properly again?
    love, b

  • I just downloaded the new iTunes and now receiving error message when I try to open iTunes!

    After downloading the new iTunes when I try to open it i receive the following error message:
    iTunes.exe - Entry Point Not Found
    Procedure entry point kCMByteStreamNotification_AvailableLengthChanges could not be located in the dynamic link librabry CoreMedia.dll

    I am having the same issue! And I have tried everything from updates, to moving the coremedia.dll file, to uninstalling and reinstalling so many times im afraid they are not gonna let me download it anymore!!! Please can somebody help??

  • Error message when I try to open itunes library

    Hi guys,
    I started my laptop today and the update the new Itunes version window appeared. I clicked onto download and install but it kept giving me an error and I wasn't able to open my itunes library anymore. I decided to uninstall itunes and download it again, but when I tried to install it it still gave me that error message. Does anybody know what that could be and how it could be solved please?
    Many thanks in advance.
    Regards,
    Maria

    Hey Sheribabe,
    Thanks for the question. I understand you are experiencing issues when connecting your iPad. Let’s troubleshoot your iTunes installation by completely removing and reinstalling iTunes and all related components:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thanks,
    Matt M.

  • Run time error message when I try to open itunes?

    I cannot open itunes afte using it for 3 years.  I receive a run time error message. 

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Keep getting fatal error message when i try to load itunes

    everytime i try and load the itunes program onto my computer i keep getting the message:
    could not gain access to HKEYLOCALMACHINE\Software\Classes\.cdda\OpenWithProgides key, please make sure you have access to this key and then try again.. now try as i might i cant even find this key on my harddrive and have no idea how to create it or if i am even looking in the right spot. please help me i would really like to put some music on my new motorola rocker or it will just become a waste of money..

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for