Error message when I try to update the Raw 7.3 update

Hi,
I get an error message when I try to update the Raw 7.3 update for Premiere Elements 11 and photoshop Elements. It says to run support adviser which I did, but it says that it could not detect any problems.
Thanks,
Ron

try downloading ACR manually
manual update for ACR (Win) = http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0 /7.3.37/Setup.zip
for mac = http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0 /7.3.37/Setup.dmg

Similar Messages

This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on a terminal server

Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin Shinde

Hi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support

Error message when I try to start the SC SM Console

Hi,
i get the following error message when I try to start the SC SM Console in TN MSDN Virtual Lab
Message: Failed to connect to server 'SCSM01.contoso.com'
Microsoft.EnterpriseManagement.Common.UnknownServiceException:
The
service threw an unknown exception. See inner exception for details.
---> System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]:
The creator of this fault did not specify a Reason. (Fault Detail is
equal to System.UnauthorizedAccessException:
You have exceeded the
evaluation period of this product. For information on purchasing the
retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions
options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions
connectionOptions)).
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception
ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings
connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings
connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ServiceManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings
connectionSettings, EnterpriseManagementGroupInternal
internals)
at Microsoft.EnterpriseManagement.ServiceManagementGroup..ctor(ServiceManagementConnectionSettings
connectionSettings)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupSessionManager.Connect(String
server)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.Credentials.ManagementGroupConnection.TryConnectToManagementGroupJob(Object
sender, ConsoleJobEventArgs args)
System.ServiceModel.FaultException`1[System.UnauthorizedAccessException]:
The creator of this fault did not specify a Reason. (Fault Detail is
equal to System.UnauthorizedAccessException:
You have exceeded the
evaluation period of this product. For information on purchasing the
retail version of this product, go to
http://go.microsoft.com/fwlink/?LinkID=151842.
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.CheckLicence()
at Microsoft.EnterpriseManagement.ServiceDataLayer.SessionManagerService.Connect(SdkClientConnectionOptions
options)
at Microsoft.EnterpriseManagement.ServiceDataLayer.BasicDispatcherService.Connect(SdkClientConnectionOptions
connectionOptions)).

System.UnauthorizedAccessException: You have exceeded the evaluation period of this product
If this is an evaluation lab, then it's time to rebuild it.
If this is a production system, then you'll need to contact product support, show proof of ownership, and get their tool that will convert the management group to a licensed version.
Generally, when building a system for production, you should do it with a full product key. there is no supported method to add the license key later except through product support's special tools.

I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie

I get a download error message when I try to ios launch 8.1.2 update

Hi
I get an error message when I try to upload iOS update 8.2.1

Hi Kcolleary,
Thank you for visiting Apple Support Communities.
I'm not sure what the error message says or whether you are on a Mac or PC, so please start with this article which gives a good starting point for troubleshooting update errors.
Resolve iOS update and restore errors in iTunes - Apple Support
If you have the error, that also links to a more focused article:
Resolve iOS update and restore errors - Apple Support
Take care,
Nubz

Error message when I try to open the "help" files.

When I try to open the help files in Elements Photoshop 10, I get the following error message in a pop up box. At the top, the box is labeled "Adobe AIR" The message: "Application descriptor could not be found for this application. Try re-installing or contacting the publisher for assistance."
I have completely uninstalled and reinstalled both my Elements programs as well as adobe air, and have updated everything that I can think of and a few more things, and still get the same message. Since I am one who often uses help files, I'd appreciate any help with this.
Thank you.
TwoCollieTom

You can directly download the help files from this location http://helpx.adobe.com/photoshop-elements/archive.html

I'M GETTING THIS ERROR MESSAGE WHEN I TRY TO OPEN THE ITUNES

im getting this message when i try to open my itunes "the itune library. itl file it's locked, on a locked disk, or you do not have write permission for this file" it was was working fine but all of a sudden it this issue just happen, i have windows 7.

I had the same problem as mentioned above. 2 Users, sharing the same iTunes account. Found following solution:
Check sharing and permission for the shared iTunes folder. In my case under HD->Users->Shared->iTunes
Also check all permissions of the underlying folders and especially *iTunes Library Database file*. In my case directly in the iTunes directory
For whatever reason, that file had no sharing. I added my wife's user name with Read /Write permission and it works again.
I guess a bug in the update. It worked fine for a long time before the update.
Mark

Error message when trying to upgrade to the new mac os update

today in the afternoon i was updating to the new version and then i got the grey screen and i restarted like it tells me in the message and then i had some serious error and the imac wasnt loading so i called support and he helped me reinstall the os so now i reinstalled it and i want to update to 10.4.8(bcuz the cd installs 10.4.4) but it tells me this error:
"installing this software requires 607MB of space"
and i cant press continue and i have 184GB free. why is this guys?
and on some other programs i try to install it tells me that error that i need to have mac os 10.3.9 and it just quits.. i just also tried to install divx and it tells me it requires mac os 10.3.9 or later and that it cant be installed on my machine(i have 10.4.4), well like 1 hour ago i reinstalled my os without any format because i had a trouble with my hardrive, everything works good now but im having this issue here .. do i need to update some information somwhere or osmething or run some tool? (i updated file permisions but still same)
btw where do i check which version of macos i have just to be sure?
please help me guys

777iPod,
This is a good guide to help with kernel panics: http://www.thexlab.com/faqs/kernelpanics.html
I think it's Support policy, even prior to an archive and install, to have a user first remove any third party RAM and third party devices to verify that none of those are causing the kernel panics. We weren't told if that was done, but I've assumed so. If third party RAM was allowed to remain installed, it is not unusual for it to be the source of kernel panics.
I don't know if it's part of the Support checklist, but when making changes like that, or when replacing hardware or software in general, I have always followed that up with a PRAM reset. I realize that usually Macs will recognize (plug & play) such changes, but my experience has been that it's better to just do the PRAM reset, or else be prepared to shut down and then do a fresh startup so that the system can do its usual self-testing that is performed during startup.
If it was an archive and install that Support recommended to jmanwee, and if it did not resolve the issue, I believe their next suggestion will be to erase and install.
Once third party devices and software have been eliminated as the potential cause of the kernel panics, I imagine Support will have no problem arranging for hardware repairs.
I'm probably overlooking something, but referring to the above link should help anyone get their situation resolved.

I keep getting this error message when i try to install the latest version of itunes, the program can't start because MSVCR80.dll is missing from your computer. try reinstalling the program to fix this problem??

I am having trouble reinstalling my Itunes on my desktop which uses Windows 7 and I can download it but once it's complete i keep getting this error message...The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. Please help me.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Fatal error Message when i try to sync the blackberry desktop with my BB8900

Got a new BB8900 last week
fatal error Message alway appear when i try to sync my blackberry desktop
the local telco cant help been trying for 1 week
Blackberry desktop version 4.7
Blackberry version 4.6
cant sync so My BB got nothing on it now

Hi Marcusng and welcome to the Blackberry forums
Try this, uninstall the Blackberry Desktop Manager, reset the pc and download Blackberry Desktop Manager again from this link
http://na.blackberry.com/eng/services/desktop/
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

I get an error message when I try to empty the trash in order to clear up an external hard drive. I had been using it for time machine, have shifted that to a larger external hard drive, and want to free up the space for photographs. Any suggestions?

What should I do when I get an error message (error code - 8003) when I'm trying to empty the trash to clear up additional space on an external hard drive?

Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2

I have the original iPad. When I joined the cloud, I tried to download books from my Kindle that I had on my iPad before going to the cloud. They seem to be downloading, but I'm getting an error message when I try to open the books.

Sinve I joined the cloud, i cannot open books I had on my kindle app after downloading. I am getting an error message telling me to delete and re-register my kindle app. I've done that, but am still getting the same message.

Have you asked on the kindle board? since it's their app that's messing up they may have more specific advice.

I am getting an error message when I try to use the rectangle tool.

This just started today, I use an HP lap top with windows 8, I just downloaded Photoshop in January. Every time I use the rectangle tool I get this message: "Could not use the rectangle tool because of a program error." how do I figure out, and fix, the error.

Hi Meagan.
We need to know exactly what version of Photoshop you are using. There are two versions of Photoshop CC as well as CS6 still available, and it makes a difference.
We need to know a bit about your hardware. You say it is an HP, but what is the model number? How much memory (RAM) does it have, for instance. An easy way to pass on that information would be to open Photoshop and go Help > System info > Copy and paste it into this thread along with your other answers.
Has the rectangle tool ever worked?
Have you had any other issues?
What have you tried by way of a fix? It's OK if asking here was your first step.
These self help links might be tricky to follow if you are not great with Computers, but have a look anyway
Troubleshooting Steps to Fix Most Issues

I get an error message when i try to download the photoshop trial?? Please Help..

I cant download the photoshop trial in my mac book bro a1286.. i dont know why its not letting me download the trial. the message i get is : "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."

What is your Mac OS version?

I get an error message when I try to install the cs6 master collection. (Exit Code: 7 Please see ..)

Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW041 ... WARNING: DW017 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 1 warning(s)
WARNING: DW017: PayloadPolicyNode.SetAction: DN payload {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 is required by {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0 but isn't free. Reason: Required dependency
ERROR: DW041: INSTALLDIR Volume E:\ doesn't exist.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

I get an error message when I try to use share function on IPhoto. I get the triangle icon with an exclamation mark inside of it.

I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Error message when I try to update the Raw 7.3 update

Similar Messages

Maybe you are looking for