Error Message when I turn on printer after installing 10.4.10

I installed the 10.4.10 upgrade, and ever since then
when I switch on my Brother DCP 115 printer, I get a
message that the connection to the machine has
failed, that I should check the cables, switch it off
and on an try again. In the upper left corner is a
picture of a camera...
But there is no connection failure, the machine works
fine. But I'm stuck with this error message that
won't disappear unless I reboot the Mac.
I tried everything already. Setting up a new
connection, reinstalling the drivers and software,
repairing permissions, nothing works.
Strange phenomenon: after a reboot, everything works
fine. After my Mac has been switched of for a couple
of hours, the problem returns.
Mac support in Holland doesn't know of anything. They
suggested to archive and repair, promised to mail me
a how-to article, which never arrived, and I don't
have a clue.
Any ideas, anyone???
I have the identical problem except my printer is a Brother MFC440CN, so the problem is not printer model specific, perhaps not even unique to Brother.
The really annoying thing is that I cannot get rid of the message without using Restart or Shutdown. The OK button doesn't close it. The error message is [MTW005]
I think Apple needs to get on this and other issues associated with 10.4.10.
BNC

Similar Messages

Error message when i turn on printer

I have a HP Photosmart C7280-CC564A All in one printer and when I turn it on I get blue screen on printer with B24C1700 on it and
you cannot go any further. It will not clear out message. Also on front of printer the blue flourescent light on what looks like a camera is flashing. Nothing is in the card readers next to it.

HI,
You might try resetting the printer. The document linked hear isn't your exact error message, but it contains the reset instructions that might clear this up for you. Try the steps especially about removing the cartridges and power cord.
Reset
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Keep getting error message when sending data to printer

i keep getting an error message when trying to print. window says "sending data to printer" but nothing happens and i get an error message.
anyone else experience this and how did you solve the problem?

Hi psknv3,
Welcome to Apple Support Communities.
What error message are you seeing when the printing issue occurs? The article linked below provides a lot of great information and general troubleshooting suggestions that may resolve the issue.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
I hope this helps.
-Jason

I am getting a new error message when opening Firefox, this is after I restarted my computer and uninstalled/reinstalled Firefox. Can someone help?

Error message:
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

I see. Well, I just tried to make IE my default browser, but it did not solve the problem. I receive the same script error when I view the image. (I may not have explained this thoroughly enough at first - I do get to view the image after answering the error message, but the print button embedded in the window doesn't work. Before, I never had a problem with viewing or printing.)
I imagine that at this point I will either need to communicate this to the IE people, or possibly revert to an older version of IE.

Error message when setting up a printer

I just received my new airport extreme (way cool). I can access the internet on both my MacBook Pro and Intel based iMac. However, when I try to add my HP Deskjet 3940 on both machines I get an error message: "an error occurred while trying to add the selected printer. error: - 9672"
I can see the printer in the printer set-up utility and it says it is connecting through bonjour.
What am I missing and why can't I print?

I checked this list. I checked it twice. No HP 3940. However, my printer is listed in the printer list - "Once your printer is connected to the base station, check to see that the printer is listed in the printer list in the Print Center (Applications/Utilities/Print Center)." When I click add I get the dreaded error message.
What's up with that?
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)

Photosmart Plus B210 - Error Message when attempting to add printer

When attempting to add our Photosmart Plus B210 on a computer with Windows 7, we get the error message: "Active Directory Domain Service is currently unavailable". We have installed the drivers from the disc and have attempted both USB and Wireless installation--neither have been successful. We have uninstalled and reinstalled mulltiple times as well as followed another forum suggestion to run msconfig and change startup to diagnostic, etc. HP Print & Scan doctor has not helped resolve. Any ideas out there?

Hello felenti,
Please let me take a moment to say "Welcome" to the HP Forums. I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issue with the installation of your printer to your computer. I also see that you have ran the HP Print and Scan Doctor and it did not resolve the issue.
One step that I do suggest we try is to run the HP Printer Install Wizard for Windows.
Please write me back with the results of the Wizard.
If I don't hear back from you today, I hope you have a Great Wednesday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

When I allowed an upgrade to Itunes on my HP Windows 7 computer now I have this error message when I turn on my computer: AppleSyncNotifier.exe-Entry Point Not Found. The the explanation in the dialogue box says: The procedure entry point sqlite3_wal_

Error message after allowing an upgrade:My dialogue box in the error message says: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll--this happened after I allowed an upgrade to be installed. I have HP Windows 7. Now my Iphone will not sync. What do I do?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

I keep getting an error message when I try to print. I have tried ctrl/p, and the print command in my email both give me the same error message

It has been for a month or 2 that I have not been able to print anything in my Firefox browser (It used to work just fine). I have no problem at all printing in Chrome ( I never use Internet Explorer ). Is it possible that my new printer is the problem? I had an HP now I have an Epson. That is the only change I have made that I am aware of.
A few weeks ago I had to print out an email, but the only way I could get it printed was to take a screen shot and paste it in a program that would print it.
The error message I get is: Printer Error An error occurred while printing.

See this - https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
Specifically see this paragraph - [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?esab=a&s=reset+printer&r=5&as=s#w_reset-all-firefox-printer-settings Reset all Firefox printer settings]

I am getting the following error message when i turn my notebook on. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi
I am getting an error message on my notbook when it boots up and i can't sync my iphone with itunes anymore. Can anyone help?
Andrew

This is a Windoze error message. See this thread:
https://discussions.apple.com/message/11336317?messageID=11336317#11336317?messa geID=11336317

IPod Comes Up with Error Message when I turn it on...

Ok. My cousin has a 4th Generation iPod, year and a half old (out of warranty).
I know I've seen this question in the forums before, but I was can't seem to find the answer.
When he turns on the iPod, it comes up with www.apple.com/support, after the little Apple shows up.
Then, it just kinda shuts off (from what I understood during our conversation, but that statment might be a little bit off).
The iPod is not recognized by his laptop (Windows XP), on the Desktop or in iTunes. When he plugs it in it just shows the battery that is like 1/4 full, but it doesn't move at all.
Can anyone help his iPod? Has its long and (relatively) prosperous life come to an end?
I appeciate help (so does my cousin)! Thanks for your help!
By the way, I forgot to tell him to Reset the iPod. If you could, please tell me if this will help or not. Also, if you could, tell me what to do if it doesn't respond to being Reset. I appreciate it!

I don't know of one place JUST for this. I usually step people thru it on the WIndows forums so 1) they don't fudge up things even more and 2) sometimes windows wants to be a pain and stuff. But You can go here and roll down to "Format in windows" http://discussions.apple.com/thread.jspa?threadID=361771
There are cases where even in disk mode it will not show, or only show for a second in windows under "My Computer". And in these cases you have to open task manager (Hold altctrldel all together to open it) goto the "Process tab", highlight "iPOdservice.exe" and hit end process. If you have to do this, you will have to restart windows when its done formatting so the "ipodservice.exe" is started again in the background and you can use the ipod updater to restore it

Error Message when I turn on printer after installing 10.4.10

Similar Messages

Maybe you are looking for