Error message when IDOC Monitor

Dear Friends,
When i monitor IDOCs, i meet one type error message, and have no idea about it, anybody can give some ideas? and what dose the 'BOL' mean? please describe it in detail, thanks a bunch~
Senario:
Direction: 2 (Inbound)
Message Type: INVOIC
Current Status: 51 (Application document not posted)
Error messages in application log as following:
Cost document from BOL not found 73769702-001
Can't determine fiscal year
Freight condition not found 73769702-001 Z003
Freight condition not found 73769702-001 Z006
Error in Bose Freight Processing

These are posting error which you need to correct. BOL means Bill of Lading. You can go and check documentation of different fields in segment/idoc types for more information,

Similar Messages

Getting "line disconnected" error message when trying to monitor

Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer. Anyone else have this issue? Any suggestions on how to fix? I have reconfigured each camera with the router but still having the error message. I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras. It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup. However, starting on day three and on, it has worked very well.
The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs. All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about. I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days. It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

Purchase Order error message when on Sourcing Cockpit.

Hi All,
I have encountered a series of error messages when I try to convert my Shopping Cart into a Purchase Order in SRM 5 within the Sourcing Cockpit. I am using Extended Classic Scenario and have defined the number range in SRM and ECC5. The error messages are below, the moment i try to concert the cart to a Po;
- Internal number range is missing for transaction type. Inform syst. admin
- Transaction type * does not exist. Check entries
- Some backend documents could not be generated, or they contain errors Further Information
- No status object is available for
I have checked the transaaction type, number ranges assignments, attributes in PPOMA_BBP but fail to find the cause.
Any pointers would be welcome!
Thnx,
Mike

Hi Muthu,
The number ranges are consistent as I have checked the number range for local purchase order and this is set as an internal between the range 3000000000 - 3999999999. On the transaction type for BUS2201 Purchase Order, 30 has been set as the Int Number Range, with all other fields left blank.
The strange thing is that the documents that failed to convert into a PO had been reprocessed in the Application Monitor for Purchase Orders, but when I go back into Sourcing to create the PO, I now get the message:
"You have either failed to select an item, or you cannot create a follow-on document due to an error that has occurred"
Regards
Mike,

Error message when attempting to use scanner Canon model MP610

Error message when attempting to use scanner Canon model MP610, any one have any fixes, suggestions?

Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, empty trash, reboot when complete.
For the other problems...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.

Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel

Program crashes without error message when opening a database

One of our users is experiencing an issue with Discoverer Desktop whereby the program crashes with no error message when he attempts to open a database from a local or network drive. If he logs in to Windows as himself, and runs Discoverer as himself, the program crashes under any Discoverer login; if I log in to Windows using an admin account, and run the program under the same context, the same issue occurs; however, if I log in to Windows as the user and run the program under the context of admin, the error does not occur under any Discoverer login.
I've tried removing and reinstalling the program but this has not alleviated the issue. The program version is 10.1.2.55 running on Windows XP SP3. If there are any other relevant details required to diagnose the issue I will gladly provide them. Could someone please help me resolve this?
Edited by: 805312 on Oct 27, 2010 6:25 AM

Welcome to the forums !
Has this ever worked ? Pl see if MOS Doc 197716.1 (Running Discoverer Desktop on Windows 2000 Or Later Releases As a Restricted User Fails With "Failed to update the system registry. Please try using REGEDIT.") can help.
One option might be to install Process Monitor (http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx) to identify the cause of the issue.
HTH
Srini

Error message when processing in the Business Warehouse

hi everybody!!
this was the error i got.plz let me know the correction process.plz explain stepwise.
thank u,
jack.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update

Hi,
This issue is in BI when you are trying to load data from one object to other Object
example: ods to cube
We need the Log information which you can find that in the monitor screen Status tab "Push button"
Regards
Hari

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

Error message when launching PowerPivot Window using Excel 2010

I have installed the latest version of Powerpivot on several of our workstations. Some of them are running the application just fine and some of them are getting an intermittent error message when trying to launch the PowerPivot Window.
We are running Windows 7 ENT 32bit with Office 2010 32bit
The error message given is : An operation that uses the database driver could not be completed. If the driver is a Microsoft driver, make sure the drvier file isn't damaged, and if it is, reinstall the driver by re-installing Microsoft Query.
You can then try again and it will work.
In fact the majority of the time this error message won't appear.
The application has been removed and reinstalled.
When I checked event viewer i'm finding this error which I think is related
The description for Event ID 1 from source MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error message when starting MaxDB instance

I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
"-24994,ERR_RTE: Runtime environment error
1,Cannot create ipc db directories for SID (OS error code 11000)"
Max DB version : 7.7.02
Does anyone have any specific pointers on where the issue could be.
Any help is greatly appreciated.
Regards,
Murali Narayanan

Hi gurus,
I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
MaxM

Error message when Closing PS CS6

I keep receiving a error message when closing PS CS6 which says "Adobe Media Core CS6 has stopped working"
What can I do to resolve this issue?
I'm running Windows Vista professional

If you want help you may have to provide some more information … and a Forum- or web-search might also be worth trying.
http://forums.adobe.com/message/4509053
http://forums.adobe.com/thread/1025148
http://forums.adobe.com/message/4495683

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Error Message when printing handouts

First, I know this has already been discussed in these forums. I tried the proposed solution in this thread http://forums.adobe.com/message/6273232#6273232 and it still didn't fly. I'll go ahead and bust out a full explanation of the issue for those of you who may not want to navigate to the other thread:
I'm getting the following error message when trying to publish my project as a handout:
I'm launching Cap 7 in admin mode on a windows 8 machine and trying to publish to Word 2013.
I'll select a publish location and start the publish, it gets to 10% and then stalls out (the error message doesn't appear at this time). If I hit alt+tab, I'll see a "Save as" window. I'll reselect the directory and name the file correctly and hit save. That moves the progress bar to 100% and the error message appears. I've tried to copy and paste the slides to a new project and the same thing occurs. From what I've seen, others have had this problem but I've yet to see a confirmed fix. If you've run into the issue and solved it, please let me know. Is there a word plugin I need to install? Is there a way to bamboozle my handouts from captivate to .pdf to word? That would be cumbersome but I'm not scared to try it.
Thanks in advance,
Eric

Have you tried with system PLD?
Thanks,
Gordon

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when IDOC Monitor

Similar Messages

Maybe you are looking for