Error Message when importing Word Docs

I am attempting to import my RoboHelp for Word source docs
into RoboHelp HTML (both are version 6) and I am getting the
message that Word seems to not be responding.
One solution I found online was to load the SSWord.wll add-in
in Word, but Word won't let me load it. (I Get a message that it
can not be loaded).
Any ideas?
Thanks,
Jim

found it myself....thanks to Peter Grainge's site. My
evaluation copy of RH7 was interfering:
http://www.grainge.org/pages/authoring/rh7/using_rh7.htm,
the last entry on the page dated October 26..

Similar Messages

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error message when importing CD's into iTunes.

I've just started getting an error message when importing audio CD's into itunes. +"Error occured while converting the file "........". The disk could not be read from or written to."+ I've been importing CDs for years now and this just started happening last night. The disk image shows up on the desktop, itunes opens and recognizes the disk and searches the database and finds the artist/track names/album etc. Then when I click the import button, I get this message. If I click on the disk image in the desktop and click on a specific file it will play through iTunes. No new changes except for maybe downloading the latest iTunes update. Any suggestions? Thank you very much in advance.

Iron-Mike wrote:
Every time I import a CD, mp3 is louder then AAC. It's just every so often if I try AAC the volume will be really low. Like barely hearable. Maybe it has to with the fact the CD was released long before AAC format was around? Something to do with compatibility maybe?
Iron-Mike, MP3 and AAC were both invented well after CD audio and both algorithms are well aware of CD format. Make sure you have "Soundcheck" settings turned on both for iTunes playback and for CD burning. iTunes Soundcheck is supposed to normalize the volumes in spite of variations in the files. Many people have noticed that they don't really work very well, but having them on is better than nothing.

I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

I am getting error messages when importing CD's. I keep getting a message saying 'unable to connect to CDDB server'. I run itunes on a macbook pro. Any ideas/solutions?

Don't worry I've sorted it! I just had to turn off Reminders as well in iCloud. Calendar then worked fine, even when I turned Calendar and Reminders back on.

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

Error message when importing video

Hi,
I receive the following error message when trying to import .flv file in Captivate 6:
I tried restarting the project several times, as well as creating new flash file, with no luck. This is only a 3-slide project with the video embedded on a slide, and will publish as SCORM.

Hi all Thanks for the rapid response. However I have sort of found the problem but not the solution. I tried loading direct from the card but that failed in the same way. So I had a think what had changed and it was only one thing. It has always worked before because I was using my XP desktop machine. I am now using a W7 laptop. So I went back to XP and hey presto, it worked. SO what does that mean? Any ideas?? Only obvious difference is the OS. In answer to why I am loading from Photoshop. I have loaded 150 video clips from the card from a compact camera.( Been on safari!) I am using PS to sort and tag for various things, then send one group to PE . I ended up that route because they loaded into PS and not PE. So in summary:- I cannot load either directly from card or via PS, video clips into PE on W7, but I can on XP. I can load same into PS and view OK in PS on W7. In case you need further info, but I suspect its a windows issue? OS=W7, PE V7, PSV7, On the W7 PC it says... BIT rate=705kps!,Sample Rate=44khz,Channel count =1 Says image is avi but I thought it was mpeg Nothing else running Its a big fast empty machine, you could have the numbers if you really want but I don't think its relevant Sorry its abit long . Thanks Chris

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

Error Message when opening attached doc with Mac for Word 2008

When I try to open attached docs of any any sorts (mainly word/pdf) I get an error message that wont allow me to open the attachments, please help!!
I have MB Pro with Mountain Lion

There are some things I can open but word docs and pdf docks I cannot open, here's the error

Getting Error Message when importing iTunes Music to iMovie 6?

Am I missing something? I used to be able to import my iTunes music to a movie creation in iMovie 6. I'm now getting an error message "Error during import. The file could not be imported: The file could not be found."
I have moved my music to an external drive - don't know if that made a difference.
Thanks

Interesting...I have moved my iTunes music onto the external drive probably six months ago. That music still works off the external via iTunes. I just looked in iTunes and my preferences are showing my local drive to store music. And recent music that I have purchased (last few months) is showing in the local drive. When I picked one of the songs from the local it works.
So now I guess the question is what will happen if I move the music from the local to the external and reset the preferences in iTunes. It should work right?

I get a Pre-execute error message when importing from Excel using the wizard.

Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
Can anyone explain what these errors mean and how they can be solved. Thank you.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
Messages
* Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
(SQL Server Import and Export Wizard)
- Prepare for Execute (Success)
- Pre-execute (Error)
Messages
* Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The metadata could not be determined because every code path results in
an error; see previous errors for some of these.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid object name 'dbo.PriceTable$'.".
(SQL Server Import and Export Wizard)
* Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
(SQL Server Import and Export Wizard)
* Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
(SQL Server Import and Export Wizard)
* Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [dbo].[PriceTable$] (Stopped)
- Post-execute (Stopped)
frustrationmultiplied

Hello,
Are you willing to try other ways to do the same?
http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
http://support.microsoft.com/kb/321686 (Distributed queries)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error message when importing songs

Hi. I get an error message - unknown error occurred while converting ... Ox77686174 etc - when I try to import songs from CD to itunes. It might happen with one song or with a whole CD. Very frustrating!! Also some songs do not import properly, eg, only get 30 secs or miss first secs of song. Any ideas. Thanks
ipod nano Windows XP
ipod nano Windows XP

hannka,
Have a look at this article in the Apple Knowledge Base and let us know if it helps you resolve your situation.

Error message when Importing a slide

Hello,
Captivate 4 - When importing a slide from one project to another, importing stops in the middle and an error message pops up "Adobe Captivate have encounter a problem and needs to close". Could it be because the project has been published? Please advise.

Hello,
Acrobat.com is a free service from Adobe, where you can store up to 5GB. You just type in the URL (acrobat.com), log in with your Adobe ID (the same you use for these forums) and can start putting files on it. You can share the file (it is in the right-click menu) and send the link to someone. I'll send you a private message with my e-mail address.
Here you can find some information about acrobat.com: http://www.adobe.com/acom/usewith/
Lilybiri

Importing Closed Caption .scc file into Premiere Pro CS6. Closed Captioning is enabled but cannot see the Captions tab. Also get error message when importing to bin.

I am using Adobe Premiere Pro CS6. My aim is to export an mpeg file with closed captioning embeded for network television. I have watched numbers adobe videos and have spent countless hours researching this. I am able to generate about 29 different types of Closed Caption files using MovieCaptioner- including .scc (which Adobe says they prefer). When I try to "Import" the file I get an incompatible error message. The same happens with all other cc file types when I try to import them. Second, I tried attaching the .scc as an attachment in the sequence menu. They show up in the preview window, but do no encode into the mpeg file. I am aware of this form: Re: How do I export closed-captioned movies from Premiere CS6?
Third- I have watched some adobe video for created the CC files within Premiere. http://tv.adobe.com/watch/learn-premiere-pro-cc/create-closed-captions-within-premiere-pro /
However, I cannot find the "Caption" menu to do so? Where is it?
Am I running into problems because I am not on the Creative Cloud? IF so, is it possible to upgrade and how do i do that. Adobe has made it incredibly difficult to contact anybody.

Hi Bracmanf,
bracmanf wrote:
I am using Adobe Premiere Pro CS6. My aim is to export an mpeg file with closed captioning embeded for network television.
Sorry, you cannot do this in Premiere Pro CS6. Only QuickTime files can be exported with embedded closed captioning and this must be done in Premiere Pro CC or later. All other formats must use a sidecar file.
bracmanf wrote:
When I try to "Import" the file I get an incompatible error message. The same happens with all other cc file types when I try to import them. Second, I tried attaching the .scc as an attachment in the sequence menu. They show up in the preview window, but do no encode into the mpeg file.
You can only attach a closed caption file in Premiere Pro CS6, no encoding is available for closed caption files (embedded or sidecar).
bracmanf wrote:
However, I cannot find the "Caption" menu to do so? Where is it?
Caption is a tab is in the Export Settings dialog box if you want to export with closed captions. This tab is available in Premiere Pro CC and later.
bracmanf wrote:
Am I running into problems because I am not on the Creative Cloud?
In Creative Cloud, you would still have trouble encoding a MPEG 2 file with embedded captions as it is a QuickTime only feature. There might be a plug-in available, but I'm not aware of it.
bracmanf wrote:
IF so, is it possible to upgrade and how do i do that. Adobe has made it incredibly difficult to contact anybody.
You can download a free trial of Creative Cloud here: https://creative.adobe.com/products/creative-cloud
Thanks,
Kevin

Error message when importing motion files into FCP

In FCP.
I choose a clip/clips in my sequence. Then choose send to motion project and follow the directions from the training dvd.
By unchecking (embed "motion" content) then save the file with a different name. Then continue with making my graphics over the video clip/clips.
When I am done I then shut off the video layer of the clip in the motion timeline. Then I save the project. Then close Motion and try to import the motion project in FCP.
When I try to import, I get an error message stating "File Error: 1 files(s) recognized, 0 access denied, 1 unknown."
I go back to the training file to try the same procedure and it works fine.
Go back to my own project and it doesn't work.
Any ideas? Anyone?
I have a Mac Pro 2.66GHz / 5 gigs of ram / 512 vram ATI graphics card
Also working with universal software for FCP studio.
Intel 2.66GHz Mac OS X (10.4.9)
Intel 2.66GHz Mac OS X (10.4.9)

OK???
Don't know what the deal is. But I made a new sequence in my project and copied my other sequence with in the new one and then tried to do the whole clip step for step process of send to motion and importing back in and it worked!!!!
I check all the listed settings of my sequence in my browser window and both the old sequence and new sequence are the same.
I am happy that I can move on with my work, yet I am frustrated with the fact that I am not sure exactly what the problem is.
Thank You Again!

Error Message when importing Word Docs

Similar Messages

Maybe you are looking for