Error message when inserting keyfeilds in Multiprovider?

Hi,
Iam using multiprovider, when i try to insert some keyfeilds in multiprovider the mentioned error message is happening
-> CL_RSD_MULTIPROV_CHECK========CP and form CHECK-03
->  OLAP processor found an error,
Intially there is no errors occured when i try to work in bex for relevant multiprovider these error message occuring.
How to overcome this?
Thanks in advacne
vas

Hi,
What is SP level or check this note(1252207) it might helpful
Regards,
SAtya

Similar Messages

  • Error message when inserting table into JSP

    I am using JDEV 10.1.3.3 and am getting the following error message when I try to create a table in a form on a jsp:
    "Could not complete get pdusage from application because it would result in an invalid document".
    Here is the stack trace:
    oracle.bali.xml.model.XmlReadOnlyException: read-only on commit
         at oracle.bali.xml.model.XmlModel.__precommitTransaction(XmlModel.java:2676)
         at oracle.bali.xml.model.XmlContext.__precommitTransaction(XmlContext.java:1519)
         at oracle.bali.xml.model.XmlContext.__commitTransaction(XmlContext.java:1549)
         at oracle.bali.xml.model.XmlModel.__requestCommitTransaction(XmlModel.java:2717)
         at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:575)
         at oracle.bali.xml.model.XmlModel.commitTransaction(XmlModel.java:555)
         at oracle.bali.xml.model.task.StandardTransactionTask.__commitWrapperTransaction(StandardTransactionTask.java:413)
         at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:203)
         at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:98)
         at oracle.adfdt.jdev.transaction.JDevTransactionManager.fetchUnderTransaction(JDevTransactionManager.java:110)
         at oracle.adfdt.view.common.binding.provider.ADFBaseProvider.<init>(ADFBaseProvider.java:34)
         at oracle.adfdtinternal.view.faces.binding.provider.ADFIteratorModelProvider.<init>(ADFIteratorModelProvider.java:46)
         at oracle.adfdtinternal.view.faces.binding.provider.ADFCustomTableModelProviderFactory.createModelProvider(ADFCustomTableModelProviderFactory.java:64)
         at oracle.adfdtinternal.view.common.binding.datatransfer.ADFBindingsProviderInfo.getData(ADFBindingsProviderInfo.java:40)
         at oracle.adfdtinternal.view.common.binding.datatransfer.BaseADFDataInfo.getData(BaseADFDataInfo.java:35)
         at oracle.adfdt.view.common.binding.utils.ADFBindingUtils.getTransferData(ADFBindingUtils.java:1087)
         at oracle.adfdt.view.common.binding.utils.ADFBindingUtils.getTransferModelProvider(ADFBindingUtils.java:1111)
         at oracle.adfdtinternal.view.common.binding.datatransfer.ADFDocumentFragmentCreatorInfo.createDocumentFragment(ADFDocumentFragmentCreatorInfo.java:63)
         at oracle.adfdtinternal.view.common.binding.operation.CreateOperation.apply(CreateOperation.java:96)
         at oracle.bali.xml.model.datatransfer.operation.PerformOperationAction.actionPerformed(PerformOperationAction.java:39)
         at oracle.bali.xml.share.ActionProxy.actionPerformed(ActionProxy.java:47)
         at oracle.bali.xml.gui.swing.dnd.DropMenuInvoker$CleanupProxy.actionPerformed(DropMenuInvoker.java:235)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
         at java.awt.Component.processMouseEvent(Component.java:5488)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

    Hi,
    obviously you try to drag and drop a component to a place where it breaks the document. Make sure the table is added to the JSP body. Have a look at the page sources for existing syntax problems - e.g. missing close elemenents or misplaced elements
    Frank

  • Error message when inserting .FLV file

    I have Captivate 6 and have downloaded all updates that appeared when I went to the Help menu > Updates.
    I am going to Video > Insert Video and browse for my .FLV file (this is a Multi-Slide Synchronized Video). I then select "Modify slide duration to accomodate video" and click OK. I am prompted with the following error:  "Video encountered an internal error"
    The .FLV file was downloaded from a Virtual Classroom recording in Adobe Connect and is 49,329 KB.
    Can anyone help me with this?

    Hi Vikram -
    Thank you for your reply.
    I have  version 6.0.1.240
    I receive the same error when I try to insert the video as an Event Video
    The error happens in all projects. I have tried several blank projects, and a few existing to test it out.
    Below is a screenshot of the options I select when inserting a video, along with a screenshot of the error message I receive after clicking OK.

  • Error Message when Inserting Page

    Adobe Acrobat 5.0
    For several years, I have been printing my financial statements/payments from online financial sites as an Acrobat document, then saving each month's file to an annual file using the Insert Page function.
    This has worked well until recently when I have begun to receive the error message: "These documents contain subset fonts that have the same name and cannot be merged."
    I have searched the net for some resolution to this problem but have seen nothing very helpful.
    Is there a way to remove the subset fonts from the document or, failing that, some other way to resolve this problem?
    Any help will be greatly appreciated.
    Jim Crockett

    If you select the text and right click on properties, you should be able to remove the subset and save the entire font. It might be acceptable to not keep the fonts since you are the only one using the PDFs. At least you might try such variations.

  • Error message when inserting Spry

    When I insert a Spry Widget, anything Spry doesn't matter
    which one, I keep getting a javascript error. It says it's in line
    455 of Dreamweaver CS3. Has anyone had any experience with this?
    Don't even have a chance to change styles or appearances. I had
    upgraded to the new Spry Widgets downloaded from Adobe.
    Thanks,
    Lydialysol

    line 455 of which page? What is the complete error?
    Nancy Gill
    Adobe Community Expert
    Author: Dreamweaver 8 e-book for the DMX Zone
    Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
    2003)
    Technical Editor: Dreamweaver CS3: The Missing Manual,
    DMX 2004: The Complete Reference, DMX 2004: A Beginner's
    Guide
    Mastering Macromedia Contribute
    Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
    Web Development
    "cheryljames" <[email protected]> wrote in
    message
    news:fgqfvh$pp1$[email protected]..
    > When I insert a Spry Widget, anything Spry doesn't
    matter which one, I
    > keep
    > getting a javascript error. It says it's in line 455 of
    Dreamweaver CS3.
    > Has
    > anyone had any experience with this? Don't even have a
    chance to change
    > styles
    > or appearances. I had upgraded to the new Spry Widgets
    downloaded from
    > Adobe.
    >
    > Thanks,
    > Lydialysol
    >

  • Error message when inserting audio

    Hi, when I try to insert a portion of an audio to my timeline, I keep getting this error and then Premiere crashes.  Is there a way that I can avoid this because I don't know why it's happening. 

    The details are as follows:
    Type: Windows WAVE audio file
    File Size: 2.1 MB
    Source Audio Format: 44100 Hz - 16 bit - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    Total Duration: 00:00:12:27856
    I also converted the sound file to mp3 but the samething happened.
    I am using CS6 by the way.

  • ORA-01654 error message when inserting multiple records

    Hello all,
    I have a Test table with attributes TEST_ID, TEST_NAME, TEST_DATE, STATUS, and want to insert multiple records into this table based on user input form. If user select a value from the drop down list, and the number of records to insert into the Test table, the application should insert that many into the Test table with the same TEST_DATE, STATUS, but TEST_NAME should be the drop down list value + i (1....the number of inserted records). I manually created the form, and wrote a sql for the process.
    For example if the user select MUSIC, 3 then data should look like this
    TEST_ID TEST_NAME TEST_DATE STATUS
    1 MUSIC1 04/06/2010 Y
    2 MUSIC2 04/06/2010 Y
    3 MUSIC3 04/06/2010 Y
    I got the error ORA-01654: unable to extend index TEST_TOOL_ID.TEST_PK by 128 in table space FLOW_13120862905990037739.
    The process query
    DECLARE IDTEST NUMBER := 1;
    BEGIN
    WHILE (IDTEST < :P1_COUNT + 1) LOOP
    INSERT INTO TEST ( TEST_NAME, TEST_DATE, STATUS )
    VALUES ((:P1_TEST_NAME || ' ' ||IDTEST), SYSDATE, 'Y');
    END LOOP;
    END;
    Here is the link to this application
    http://apex.oracle.com/pls/apex/f?p=4000:1:3173416575551580::NO:RP:FB_FLOW_ID,F4000_P1_FLOW:32828,32828
    Any help would be appreciated.
    Thanks,
    Karoline

    This is the output i get when i change the getMessage with printStackTrace.
    String getMessage() replaced with printStackTrace:
    G:\studies\Chapter11\MakeDB.java:33: 'void' type not allowed here
                   System.out.println("Could not drop primary key on UserStocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:43: 'void' type not allowed here
                   System.out.println("Could not drop UserStocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:54: 'void' type not allowed here
                   System.out.println("Could not drop Users table: "
    ^
    G:\studies\Chapter11\MakeDB.java:64: 'void' type not allowed here
                   System.out.println("Could not drop Stocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:83: 'void' type not allowed here
                   System.out.println("Exception creating Stocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:102: 'void' type not allowed here
                   System.out.println("Exception creating Users table: "
    ^
    G:\studies\Chapter11\MakeDB.java:119: 'void' type not allowed here
                   System.out.println("Exception creating UserStocks table: "
    ^
    G:\studies\Chapter11\MakeDB.java:133: 'void' type not allowed here
                   System.out.println("Exception creating UserStocks index: "
    ^
    G:\studies\Chapter11\MakeDB.java:159: 'void' type not allowed here
                   System.out.println("Exception inserting user: "
    ^
    9 errors
    Tool completed with exit code 1

  • Error Message When Inserting Data Into Table

    Hi,
    I am trying to insert the following value into my customer table, however i get the following error on doing so.
    ERROR: date format picture ends before converting entire input string
    STATEMENT:
    insert into phonecall (start_date_time)
    values(10-JAN-2006 11:53:09)
    any ideas as to what might be wrong with my insert statement to bring up this error ??
    start_date_time is a DATE field by the way.

    Or
    SQL> alter session set nls_date_format='DD-MM-YYYY HH24:MI:SS';
    Session altered.
    SQL> create table aa (test date)
      2  /
    Table created.
    SQL> insert into aa values ('11-12-2006 12:11:22')
      2  /
    1 row created.
    SQL> select * from aa ;
    TEST
    11-12-2006 12:11:22
    SQL>

  • Error message when inserting built in flash buttons

    Anyone help point me to a solution?
    Previously worked fine - but now a problem. When wanting to
    either add or edit existing flash buttons, all I get is "Error
    unknown" - no ref ID to help me.
    In the html editor window - I can no longer see the flash
    buttons. They have been replaced with the greyed flash icons. The
    flash functionality has just disappeared for some reason?
    I run mac os x - and have the current MX 2004 upgraded
    version 7.01
    I've reloaded MX 2004 - but no good.
    Any ideas anyone please?
    BTW - I'm not an expert by any means - but just baffled and
    frustrated!

    Alan
    Thanks for the pointer I will scan all of the code in the
    morning for non-standard characters.
    I do not see any with firs scan but I did change the path to
    all of the files whan I moved the data to a new disc.
    I went through DW and reset the paths in the site menus and
    had it recreate the file map and the cache.
    I did not get any errors for that process but that does not
    involve the Java interpeter;-)
    I will post the results later EITHER positive or negative.
    quote:
    Originally posted by:
    Newsgroup User
    > I am running DW8 on an imac (intel CPU)
    as a guess from years of this- there is a "funky" character
    in the hd name,
    your username, or a folder name in the path to this local
    site folder. Dw
    trips up on the character and can't resolved the path to the
    local site
    folder.
    so it doesn't create Flash Text or Flash Buttons and gives an
    Undefined
    Error.
    And will give constant nags that "the selected homepage is
    not in the local
    site folder"
    please do this.
    open a new dw document using File->new
    -->don't save this file<--
    type some text, select it, and using the property inspector's
    Browse to File
    folder icon make a link to this site's "homepage"
    view the code, copy the link code and paste into reply.
    See this technote:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14452
    it should be an absolute full hard drive path like this:
    href="file=///hdname/Users/username/folder/folder/file.html"
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • When I insert a CD that I know has photos burned into it, I get an error message: you inserted a blank disc. How can I access the photos?

    when I insert a CD that I know has photos embedded in it, I get an error message: you inserted a blank disc.
    The disc shows up nowhere on mhy computer, desktop,etc.
    How can I access the disc that isn't there?
    Dan Miller

    See my FAQ*:
    http://www.macmaps.com/cdrfailure.html

  • Error message when using Spry Data set with XML

    Hi,
    I have what i see as a big problem, might just be me being
    dumm, but here we go.
    When I try to use the feature of spry XML Data Set and insert
    spry table I get error message when trying it in IE 7.
    There are even a problem when I use fireworks automated slide
    show function, where you can choose to use the Spry/XML gallery
    feature.
    The error message I get everytime (incl the auto gallery in
    fireworks) is:
    The tag: "html" doesn't have an attribute: "xmlns:spry" in
    currently active versions.[XHTML 1.0 transitional]
    The tag: "div" doesn't have an attribute: "spry:region" in
    currently active versions.[XHTML 1.0 transitional]
    The tag: "th" doesn't have an attribute: "spry:sort" in
    currently active versions.[XHTML 1.0 transitional]
    and so on.
    What´s wrong?!

    Hello barvid,
    Ok, let's take each problem step by step:
    1. The first error you see in the browser: " Exception while
    loading ..." normally appears when you try to load files that are
    not permitted by the browser security model. This means the XML
    file you try to load is located on a different server than your
    HTML which is not allowed. The browser is not permitting to load
    any files that are not in the same domain as the current page
    because of the complex security risks. You'll have to either get
    the XML file from its original location and save it in your website
    or use a proxy on your web server that should request that file
    from the external server and send it to the browser as an XML from
    the same domain as the HTML origin.
    1.2 The "Exception while loading ..." error you see is a
    generic error and my previous advise is based on my experience. In
    case this is not your scenario you'll have to open the SpryData.js
    and around line 112 you'll see the following code:
    Spry.Debug.reportError("Exception caught while loading " +
    url + ": " + e);
    Please change this line with the following line of code:
    Spry.Debug.reportError("Exception caught while loading " +
    url + ": " + (e.message?e.message:e));
    to obtain a more verbose error message that may clarify the
    reasons of your errors.
    2. The problems you describe are not browser errors but they
    are w3c validation errors. At this point the XHTML standard allows
    every application that define custom namespace attributes to also
    link a DTD to the page so the page to continue to be valid.
    Unfortunately at this point this feature is not correctly supported
    by the FF and IE so we wrote an articles about how you should
    link
    the Spry DTD to your page so the validator understand the
    custom attributes Spry use. You'll find inside the full description
    of the problems and all the technical details you'll need to know
    to solve this issue.
    Regards,
    Cristian

  • Error message when saving to a:\ drive when no disk present

    I am using a Jfilechooser andsaving images using ImageIO, but I want add in the code necessary to display an error message when the user tries to save to the a:\ drive but there is no disk present. How would I do this, this is the code so far:
    JFileChooser chooser = new JFileChooser();
    chooser.setApproveButtonMnemonic('a');
    chooser.setApproveButtonText("Save");
    // create a file chooser with save dialog
    int returnVal = chooser.showSaveDialog(c);
    // If the user selects ok
    if (returnVal == JFileChooser.APPROVE_OPTION) {
    // Get the file the user selected
    File file = chooser.getSelectedFile();
    / Get the name of the selected file
    String name = file.getName();
         // Set the format name to null
    String formatName = null;
    // Get the index number of when the . occurs in the file name
    int dot = name.indexOf(".");
         try {
         if(dot == -1) {
         file = new File(file.getParentFile(),
    name + "." + defaultExtension);
         formatName = defaultExtension;
         else {
    // else get the format name using a substring.
         formatName = name.substring(dot+1);
         // If the image cannot be saved, display an error message.
         if(!ImageIO.write(bi, formatName, file)) {
         file.delete();
         JOptionPane.showMessageDialog(c,
         "The image could not be saved. Please ensure that the extension is .jpg or .png",
         "Image save failed",
         JOptionPane.ERROR_MESSAGE);
         else {          // The image can be saved, so display a confirmation message
         JOptionPane.showMessageDialog(c,
         "The image has been saved to:\n"+
         file.getPath(),
         "Image Saved",
         JOptionPane.INFORMATION_MESSAGE);
         catch(IOException e) {               // Display an error message if save fails.
         JOptionPane.showMessageDialog(c,
         "The image could not be saved, no space on disk!!\n" + e,
         "Image save failure",
         JOptionPane.ERROR_MESSAGE);

    Again I have tried this, but in my program if I try to save to the a drive when no disk is inserted, the JOptionPane i want to display is not coming up.
    the system prints out
    java.io.FileNotFoundException: A:\image.jpg <The device is not ready>
    If that makes any sense to you

  • Error message when using search

    why do i keep getting an error message when using the "search" tabe in iTunes. This happend whe i upgraded t the latest version of itunes.

    Well, I believe JHeadstart does not really have this functionality.
    One way is use a Query Operator 'startsWith', but then you always query like LIKE '<entered search value>%'
    This is probably not what you want...
    But you could hack it into advancedSearch in YourApplicationModuleImpl
    try {
    if (viewCriterium.getQueryValue() != null) { //This is where exception JHS-00116 is raised...
    value = viewCriterium.getQueryValue().toString();
    } else {
    value = null;
    catch (NumberFormatException ex) {
    //insert check for wildcard
    value = viewCriterium.getValue().toString();
    if (value.indexOf('%')>=0) {          
    sLog.debug("Ja, een wildcard!!!");
    operator = "LIKE";
    } else {//original exceptionhandling code here...
    ...and a bit later, add test for "LIKE":
    if (viewCriterium.isDate() || viewCriterium.isString() || "LIKE".equals(operator)) {
    value = "'" + value + "'";
    very nasty code, and does not raise an exception for searches like '%xxx'
    Good luck,
    HJH
    Edited by: HJHorst on Mar 5, 2009 12:03 AM

  • Adobe updates: I've gotten error messages when trying to download pdfs (very annoying). Read somewhere that mac os has problems with the adobe extensions, thus, causing error messages from adobe. I ignore the updates. Should I?

    Hi All,
    I have stopped updating adobe software b/c I read that the adobe update software inserts extensions into the mac software system, causing annoying/time consuming error messages when downloading new pdfs. I get adobe update notices 2-3x/week. What do you recommend? I use an iMac OS 10.94.
    thanks for your help.

    Preview will do all that and is part of the OS.
    Mac Basics: Preview app views and edits PDFs and images
    With Adobe, if it's working, then it should be fine. See here
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Macintosh

  • Got error message when store XML documents into XML DB repository, via WebD

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
    I got error message when store XML documents into XML DB repository, via WebDAV.
    I have successfully registered 5 related schemas and generated 1 table.
    I have inserted 40 .xml files into this auto generated table.
    using these data I created relational view successfully.
    but since I couldn't store XML documents into XML DB repository, via WebDAV
    when I query using below code:
    SELECT rv.res.getClobVal()
    FROM resource_view rv
    WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
    I got nothing.
    My ftp code is listed below:
    ftp> open localhost 2100
    Connected to I0025B368E2F9.
    220- C0025B368E2F9
    Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
    220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
    User (I0025B368E2F9:(none)): fda_xml
    331 pass required for FDA_XML
    Password:
    230 FDA_XML logged in
    ftp> cd /home/DEV/message
    250 CWD Command successful
    ftp> pwd
    257 "/home/DEV/message" is current directory.
    ftp> ls -la
    200 PORT Command successful
    150 ASCII Data Connection
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
    226 ASCII Transfer Complete
    ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
    250 SET_CHARSET Command Successful
    ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
    200 PORT Command successful
    150 ASCII Data Connection
    550- Error Response
    ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
    550 End Error Response
    ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
    I have tried all suggestion from another thread such as:
    alter system set events ='31150 trace name context forever, level 0x4000'
    SQL> alter system set shared_servers = 1;
    but failed.
    is there anyone can help?
    Thanks.
    Edited by: Cow on Mar 29, 2011 12:58 AM

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
    I got error message when store XML documents into XML DB repository, via WebDAV.
    I have successfully registered 5 related schemas and generated 1 table.
    I have inserted 40 .xml files into this auto generated table.
    using these data I created relational view successfully.
    but since I couldn't store XML documents into XML DB repository, via WebDAV
    when I query using below code:
    SELECT rv.res.getClobVal()
    FROM resource_view rv
    WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
    I got nothing.
    My ftp code is listed below:
    ftp> open localhost 2100
    Connected to I0025B368E2F9.
    220- C0025B368E2F9
    Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
    220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
    User (I0025B368E2F9:(none)): fda_xml
    331 pass required for FDA_XML
    Password:
    230 FDA_XML logged in
    ftp> cd /home/DEV/message
    250 CWD Command successful
    ftp> pwd
    257 "/home/DEV/message" is current directory.
    ftp> ls -la
    200 PORT Command successful
    150 ASCII Data Connection
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
    drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
    226 ASCII Transfer Complete
    ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
    250 SET_CHARSET Command Successful
    ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
    200 PORT Command successful
    150 ASCII Data Connection
    550- Error Response
    ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
    550 End Error Response
    ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
    I have tried all suggestion from another thread such as:
    alter system set events ='31150 trace name context forever, level 0x4000'
    SQL> alter system set shared_servers = 1;
    but failed.
    is there anyone can help?
    Thanks.
    Edited by: Cow on Mar 29, 2011 12:58 AM

Maybe you are looking for