Error Message when installing updates: "Cannot open file (-3001)"
I have a MacBook3.1. with Mac OS 10.5.7. Three days ago I installed 5 to 6 updates for iTunes, iDVD, AirPort Express, Java, etc. After the installation, I could not access the internet because my AirPort wireless on the Mac was off (non-existent). I could not even scan for my network. I could not access iTunes, in fact when I opened iTunes, the application got stuck and I could not even "force quit" the application. I went to the Apple Store and was told to Re-install the original OS discs (10.5) received with the MacBook, which I did. After the installation things seemed to be back to normal. I was able to access the internet, etc. However, I could not open iTunes because and I paraphrase "the iTunes version that created/supported the application is not.....". OK so I need to update the software. Now, when I tried to update the software with the newly installed "re-install" 10.5 OS I received the following message:
"A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
Meanwhile, I was searching the internet googling the above message. So internet access was not the issue. I decided to create a "test" admin account to see if I could update from another account. Low and behold, I was able to access and update each new software update from the new "test" account and ultimately open iTunes from my personal (main) account.
Very confused and could use some guidance. Any ideas?
Welcome to Apple Discussions:
My general rules:
Never install more than one update at a time - especially those requiring a reboot.
Whenever possible, use the manual updates and for OS updates, always use the manual combo update.
If a problem does occur, reinstall any "bad" updates with manual updates. Yes, they can be reapplied.
Again, one at a time.
Similar Messages
-
I've been trying to install recent updates for numbers, pages, and keynote, I get a message that says "There was an error in the App store. Please try again later." (20). I tried several times over the last few days and continue to get the same error message.
KatThank you Catherine & MrToaster - Yes - I've just updated to my new credit card. All the details were correct, inc authorisation code but App Store kept prompting me to update iMovie then, not allowing me to (There was an error in the App Store. Please try again later. (20)).
Your advice worked - I logged out and in again.
The problem is that I'll definitely have forgotten your tip when my card next expires! -
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
I am trying to update itune and am geting canot find Update'itunes.msi I have tried to locate the file and cannot wit th phone upgraded to ios6 i canno cnnec it to itunes How can i solve this issue?
Help(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin ShindeHi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support -
getting a error message when i try to open i tunes, file msvcr80.dll not found. Have tried to reinstall i tunes but receive another error message when thats done down loading it reads service apple mobil device failed to start, verify that you have sufficent priviliges to start system. Any ideas?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I keep getting an error message when installing iTunes with windows 8
See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2 -
I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay
Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry -
A networking error has occurred: Cannot open file (-3001)
When I attempt to use Software Update I get the following message: "A networking error has occurred: Cannot open file (-3001)"
I am connected to the Internet, can connect with iDisk no problem. Manual downloading also works.
Any ideas? Do I trash a corrupted file or what?
Many thanks in advance.
John
Message was edited by: [email protected]I troubleshot this problem with a helpful Apple tech person who provided a workaround:
Establish a second identity. After you log out of your own identity and into the second identity, you can successfully use software update. He had me trash a number of items deep within the system but nothing else worked. I also ran the Utilities program both off the system and the 10.5 disk with no effect.
So far then, the only solution appears to be the second identity route or to manually download and apply updates. Quite a mystery I'd say!
Any ideas out there? -
How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP
First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe -
General Error Message When Installing Flash Player on Mac
I have a new MacBook Pro. I have OS 10.8.2. I cannot get FlashPlayer to download. I have tried uninstalling and reinstalling Adobe Flash Player 11 from the Adobe website. Doesn't work. Every time I try to download, I get an error message that says "Error: General Installation Error" Can someone PLEASE help? I've spent hours with this and am very frustrated.
Thank you for your reply. I am running Safari, and I have tried it with
the browser closed and open, and same result. Here's the string:
1/29/13 9:14:23.111 AM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa02372980 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x4fc4fc:) ), so denying.
1/29/13 9:14:23.111 AM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x4fb4fb,
securitySessionID=0x186f3, err=-13066
1/29/13 9:16:36.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 84
1/29/13 9:17:17.590 AM sudo[6366]: Aaron : TTY=unknown ; PWD=/ ;
USER=Aaron ; COMMAND=/usr/bin/open
http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
1/29/13 9:31:50.494 AM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa0141e3c0 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x518518:) ), so denying.
1/29/13 9:31:50.494 AM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x517517,
securitySessionID=0x186f3, err=-13066
1/29/13 9:33:52.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 84
1/29/13 9:35:32.014 AM sudo[6521]: Aaron : TTY=unknown ; PWD=/ ;
USER=Aaron ; COMMAND=/usr/bin/open
http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
1/29/13 9:44:32.000 AM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 3
1/29/13 9:46:55.473 AM coreservicesd[72]: Application App:"Adobe Flash
Player Install Manager" @ 0x0x7ffa01418520 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x545545:) ), so denying.
1/29/13 9:46:55.474 AM WindowServer[98]: Failed setting
the front application to Adobe Flash Player Install Manager, psn
0x0-0x543543, securitySessionID=0x186f3, err=-13066
1/29/13 9:46:55.784 AM authexec[6588]: executing /Library/Application
Support/Adobe/Flash Player Install Manager/fpsaud
1/29/13 10:37:02.258 AM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa02123b30 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x57d57d:) ), so denying.
1/29/13 10:37:02.258 AM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x57c57c,
securitySessionID=0x186f3, err=-13066
1/29/13 10:39:02.000 AM kernel[0]: HFS: Vol: Flash Player Very Low
Disk: freeblks: 0, dangerlimit: 84
1/29/13 10:39:27.431 AM sudo[6839]: Aaron : TTY=unknown ; PWD=/ ;
USER=Aaron ; COMMAND=/usr/bin/open
http://get.adobe.com/flashplayer/completion/aih/?exitcode=255&type=install
1/29/13 2:54:59.429 PM coreservicesd[72]: Application App:"Adobe Flash
Player Install Manager" @ 0x0x7ffa01418520 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x597597:) ), so denying.
1/29/13 2:54:59.429 PM WindowServer[98]: Failed setting
the front application to Adobe Flash Player Install Manager, psn
0x0-0x594594, securitySessionID=0x186f3, err=-13066
1/29/13 2:54:59.740 PM authexec[6892]: executing /Library/Application
Support/Adobe/Flash Player Install Manager/fpsaud
1/29/13 3:04:55.770 PM coreservicesd[72]: Application App:"Install
Adobe Flash Player" @ 0x0x7ffa014417d0 tried to be
brought forward, but isn't in fPermittedFrontASNs ( (
ASN:0x0-0x5b65b6:) ), so denying.
1/29/13 3:04:55.770 PM WindowServer[98]: Failed setting
the front application to Install Adobe Flash Player, psn 0x0-0x5b45b4,
securitySessionID=0x186f3, err=-13066
1/29/13 3:06:56.000 PM kernel[0]: HFS: Vol: Flash Player Very Low Disk:
freeblks: 0, dangerlimit: 84
I look forward to your response.
Hilary
In a message dated 1/29/2013 6:27:35 P.M. Central Standard Time,
[email protected] writes:
Re: General Error Message When Installing Flash Player on Mac
created by Chris Campbell (http://forums.adobe.com/people/chris.campbell)
in Installing Flash Player - View the full discussion
(http://forums.adobe.com/message/5032761#5032761) -
We were able to update iPhones but get an error message when trying update our iPad. Ay suggestions?
What iOS are you currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Error message when installing, modifying or repairing Adobe Reader
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1406. Could not write value Installed to key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS.
Verify that you have sufficient access to that key or contact you support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\IMAIL. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MAPI. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents\MSFS. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: <Keyname>. System error 1009.
Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value <Valuename> to key <Keyname>.
Verify that you have sufficient access to that key or contact you support personnel.
Please see: Error message when installing, modifying or repairing Adobe ReaderThank You phoney01.. this did indeed work perfectly for me as well!
-
I had to reinstall itunes and now I get an error message when i try to open it please help
i had to reinstall itunes and now I get an error message when i try to open it please help
Please make sure to post the error message here, then we can help you decypher it.
You may want to make sure you're installing the right version of itunes. If you have a 64bit system, you will need to make sure to download and install the 64bit version of iTunes.
http://support.apple.com/kb/DL1427 -
Show error message when Install SM7 in step 4 execute Service
Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .
Maybe you are looking for
-
I've been using Steve Lambert's SelfControl to block myself from certain time-sucking internet sites for a certain period of time every day. I've automated the program launch using an AppleScript that runs based on an iCal alarm, but the problem is t
-
Can't open NEF files in PS4 on my iMac.
What do I do?
-
CS3 tools interactive photo album and small video
Sorry to ask something that I should know. I have 2 the CS3 tools, photoshop & AI and the full production studio of CS2. I haven't used these tools for mnths (nearing a yr) and didn't have a whole lot of experience even when I used them daily. Cuttin
-
Optimizing an SQL Query using Oracle SQL Developer
Hi , Currently i am using Oracle SQL Developer as my Database IDE . Is it possible to use Orqcles SQLDeveloper for the purpose of Optimizing an SQL Query ?? For example assume i am having a query as : Select from Tranac_Master where CUST_STATAUS='Y'
-
How Assign Costing sheet to Purchase Order?
Dear MM, Please Guide me How Assign Costing sheet to Purchase Order?