Error message when landline trys to call my iPhone
My mom has been trying to call me for months since I got my phone. I can call her just fine, but she can't get through to me. It gives her an error message that says, "Invalid number or code, please input the number or code again". I really need my mom to be able to call me on her landline since where she lives there is no cell service. I called AT&T and Apple and both told me my phone was fine, and that the service was fine that it has to be on her end. But now her phone company said there should be no reason that this problem is happening. I have run out of ideas, and if this can't be fixed, I don't know what to do.
Other people can call me through their landlines, and I have talked to her landline but they have no idea what in the world is going on. They apparently are looking into it, but I was trying to see if anyone has heard anything about this.
Similar Messages
-
Error Message when i try to restore my iPhone: The iPhone "iPhone" could not be restored. This device isn't eligible for the requested build. HELP PLEASE!!!!
My Ipad and Iphone 3gs is both have issues too! I'm ready to give up! lol HELP ANYONE......
-
I get the follow error message when i try to update my Iphone on I Tunes " fireware is not capatible 2
got an anti virus that thinks it should scan email. Turn that function off.
Have a firewall, check that Thunderbird has full internet access, not some Auto rubbish that somehow fails. -
I keep getting error message when I try to update my iphone 3g to ios saying iphone software update swerver could not be contacted
Turn off any antivirus and firewall programs and try again
-
I keep getting an error message when I try to sync my iPhone 5 to my Mac in iTunes. It says "The iphone cannot be synced. An unknown error occurred (1723).
Hello Chad176
If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error. (-50). my icloud drive was stuck in an upgrade cycle, but i've stopped that and still get the error message.
I restarted itunes and tried again (based on a similar question/solution from 2012).
I don't get the error message anymore, but it's really sort of odd that after step one of sync, it looks as if sync stopped, and then all of a sudden you see step 4 of sync.
Also before the upgrade I had 7+ gigs of space free and after the upgrade I have 10 gigs free. seems like something is amiss, but it's not like I have anyway of determining that. -
I recently had to replace my hard drive. I restored all my files including my iPhone backup. Yesterday while syncing I had a power failure. Now when I try to syn my iPhone 5 with my computer I get an error that says the backup file is corrupted and I need to delete it and try again. How do I do this>
It is under Edit/Preferences/Devices
-
I get an error message when I try to connect my iphone 4 to my MacBook
I have a MacBook pro (2006) and I keep trying to connect my iphone 4 so I can add music to the phone and get my pictures from my phone to the laptop, every time I plug the phone in I get an error message that reads "iTunes could not connect to the iPhone 'Kianna's Phone' Beause it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes." I don't have a lock code on my phone so I tried to just slide it to unlock it and I get a messages on the phone asking if I trust this computer so I click yes but it continues to pop up. I tried to turn on the passcode and type it in to unlock it then plug it in and also while it is plugged in then I tried taking it off again, nothing worked. I would really appreciate it if someone could help me. My phone is all updated there is no available software update.
Presumably you have some sort of wired or wireless router.
You will hopefully have a manual for that. There should be a login/password to let you change the way the router works usually via a web page interface, as chances are if you can see your network name but not connect it's a configuration issue.
Perhaps someone set it up for you. What sort is it?
If you can see the network name then (if wireless) the router is broadcasting the SSID (name essentially) - in theory you should have a password set to access that wireless network - if not then anyone will be able to tap into your network which is not ideal from a security viewpoint. It's often best to disable broadcasting the name so no one sees your network, but it's easier to configure automatically when you don't have to enter it manually into a device like AppleTV.
AC -
Why do i keep getting an error message when i try to backup my iphone 4
My iphone 4 will not back up, keep getting message "backup was not able to save to computer" i have reconfigured my anti virus and uninstalled and reinstalled itunes. Can anyone help me?
I'd try the following document with that one:
iTunes: "Backup could not be saved on the computer" alert message -
I get a error message when I try to sync my Iphone:
This is the message i get: The Iphone can not be used becasue the apple mobile device service is not started. I called the 800 numbr hopeing for a fix. they wanted to charge me $50.00 to have a tech go into my computer to fix. Sounded fishy. is this a scam and how do we fix this so i can back up my Iphone?
I was receiving the same message. I had to uncheck the box that allowed me to sync my phone to my computer (PC) via wi-fi. After that, I have not had any problems. I am speculating that this issue is probably related to the wi-fi problems people are experiencing with iOS 6.
-
Message reads: the required software is not installed. Remove iTunes and re-install. I have a pc with Windows XP. If I re-install iTunes, won't this erase all of my data from iTunes?
No, reinstalling iTunes will not remove iTunes data. See: http://support.apple.com/kb/HT1925
-
I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)
I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)
what can I doSearch here or Google ... https://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync: "you do not have enough access privileges for this operation." It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.
See:
iPhone - not enough access privileges: Apple Support Communities -
Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin ShindeHi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support
Maybe you are looking for
-
In SSMS after creating the query Report, how to export excel the same report from SSMS
for Beginners in SSMS after the report is created , how to export the same report to excel, I did try the option to task and export and follow the procedure, this procedure does not export the same report, the one was created, unless I am missing som
-
9iDS Release 2 - what and when
I read all this marketing hype with Forms/Reports 9 but the inference is that they are in a 9iDS Release 2. When will this be available and what exactly will it give me over ver 1.0.2.4 (May-01). I have the same problem with 9iAS Release 2 - what com
-
Anyone else notice this instance bug with components?
This seems to affect all components. It seems to work if the instance names are left out or if they are both the same. Try this: Put a button on frame 1 and a button on frame 2 (it doesn't matter if you duplicate the button for frame 2 or add it to a
-
on the ipad version how can i aligned the title. i see on their templates the ability to left center or right alignment. on my tables it is always centered
-
U410 a year old, touchpad not working, have to turn it off, otherwise it clicks everything.
I have a U410, and it's a year and a half old. Touchpad is not working, so I turn it off to do anything. If I don't, it thinks I'm clicking on everything, thus causing tons of problems, freakouts, etc.