Error message when login to Remote Web Access

Hi everyone,
I have a server that is running Windows Server 2012 Essential. All was working fine until one day I tried to login to Remote Web Access. As soon as I type in my user name and password and press enter I am greeted with the following error message:
"Critical Error - Remote Web Access" (this is displayed in the browser's web page bar)
"Cannot connect to Remote Web Access. Please contact the person who manages the server."
I don't know how to fix this problem. I only get this error page when entering the correct login.
I will be very grateful if anyone knows hot to get around this.
Thanks!

Hi John:
Before we get too worried, try "other user" then domain-name\user-name and pw.
Try that and let us know.
Also, and becuse you should do it anyway, run the BPA and fix everthing it finds, look through the event viewer for error messages, and run the BPA from right side under the devices tab.
Larry Struckmeyer[SBS-MVP]

Similar Messages

  • I get an error message when downloading ITunes :could not access the network location %public%\desktop\

    I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
    windows vista 32 bit

    Try the following user tip:
    "Could not access network location %PUBLIC%\Desktop\" install errors

  • Iam getting error message when i launch Opera web browser

    Hi All,
    I have installed Opera web Browser on solaris 9 without any error message. When i try to start Opera web browser it says following message
    ld.so.1: ./bin/opera: fatal: libqt-mt.so.3: open failed: No such file or directory
    Killed
    How to solve this problem? Any idea
    Thanks in Advance
    Jai

    hello..
    i had same above problem..then i install SFWqt as you tool. and that early error dissappered. now new error reappered.
    I use ultrasparc systtem..and solaris 9...I install opera 9.21(shared). Now i tried to run..i was start...else it shows these errors
    root@sunrise # ./opera
    opera: $HOME set to /root. Use -personaldir if you do not want to use /root/.opera/
    opera: X Shared memory extension is not available. ZPixmap not supported
    ld.so.1: /usr/local/lib/opera/9.21-20070510.2/opera: fatal: relocation error: file /usr/local/lib/opera/9.21-20070510.2/opera: symbol setInputMethodEnabled__7QWidgetb: referenced symbol not found
    Killed
    Help me to start opera
    Best Regards,
    Ashish

  • HP Laserjet 1018-script error message when I print from web sites

    I have a HP Laserjet 1018. When I print from Microsoft products, it prints fine. However, when I try to print from a web site, it gives me an error message stating that there  is a script error.

    Its some PDF files, it prints using Adobe on a Windows OS just fine, but not in adobe on the Mac. It prints using preview but all the fine details of the picture does not print. One file that does not print is a drawing generated from AutoCAD.

  • Why am I getting this error message when I close some web pages? Exc in ev handl: Error: Bad NPObject as private data!

    This error message recently started popping up periodically on web pages that seem to have graphics or photos. There have been recent Adobe updates, but I can't verify which ones and whether they are the issue. On the other hand a recent Firefox update 7.0.1 indicated it was incompatible with a number of plug-ins? Could that be the source. Incidentally after I receive the message: it comes on twice, I am returned to a previous screen without further problem.

    Please see solution in http://kb.mozillazine.org/Problematic_extensions
    for "McAfee Site Advisor".
    (Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Error message when I run the Web Dynpro Project

    Dear friend,
    I had deploy & run project, but it's got the error message under the line:
    I had install NWDS V. 2.0.11 on my PC, but the project which I deployed was the version that I created by NWDS V. 2.0.9, and I had install new OS as XP Home instead the old one (Windows2000), are these the cause of problem?
    Please advise how can I do.
    Best regards,
    SeMs
    Web Dynpro client:
    HTML Client
    Web Dynpro client capabilities:
    User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; Media Center PC 3.0; .NET CLR 1.0.3705), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
    Web Dynpro runtime:
    Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
    Web Dynpro code generators of DC local/ZWelCome:
    SapDictionaryGenerationCore: 6.4011.00.0000.20050127161623.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:34:47[UTC], changelist=324383, host=PWDFM026.wdf.sap.corp)
    SapMetamodelWebDynpro: 6.4011.00.0000.20050121170001.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:38:14[UTC], changelist=322883, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCore: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:49[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
    SapWebDynproGenerationCTemplates: 6.4011.00.0000.20050217164947.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:53:22[UTC], changelist=329752, host=PWDFM026)
    SapGenerationFrameworkCore: 6.4011.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:00[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
    SapIdeWebDynproCheckLayer: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:02[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
    SapMetamodelDictionary: 6.4011.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:32:12[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
    SapMetamodelCommon: 6.4011.00.0000.20050121165648.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:28:59[UTC], changelist=322878, host=PWDFM026.wdf.sap.corp)
    SapWebDynproGenerationCore: 6.4011.00.0000.20050215134310.0000 (release=630_VAL_REL, buildtime=2005-02-20:21:42:32[UTC], changelist=329103, host=PWDFM026.wdf.sap.corp)
    SapDictionaryGenerationTemplates: (unknown)
    Web Dynpro code generators of DC sap.com/tcwddispwda:
    No information available
    Web Dynpro code generators of DC sap.com/tcwdcorecomp:
    No information available
    J2EE Engine:
    No information available
    Java VM:
    Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
    Operating system:
    Windows 2000, version: 5.0, architecture: x86
    Message was edited by: Sukasem S.wattanakoon
    Message was edited by: Sukasem S.wattanakoon

    Probably the usual problem of deploying an application built with a newer NWDS (SP11) on an older server (SP9).
    But without the stacktrace this is only a guess.
    Armin

  • Error message when trying to publish web pages

    Hi,
    I had a problem with some "older" pages not loading pictures on each page. Someone suggested I try "publish all" and now I get this error message:
    Publish Error
    An error occurred while publishing file "/web/.Temporary Web Resources/F9C31143-DADE-4546-B309-FA11EEE9FA9B" Try publishing again later.
    Publishing again later (several times) had no effect--same message. Restoring iWeb to a version that did not have the "publish all" attempt brings up a iWeb that appears identical to the latest version, and all boxes are showing red, indicating a "publish all" step is the only one possible.
    How can I fix the error and/or remove the corrupted file?
    Any help will be greatly appreciated.
    My web pages has numerous pages and lots of pictures, videos etc
    thanks
    hermann

    Try the troubleshooting steps under "Fix iWeb" here....
    http://www.iwebformusicians.com/WebMusic/iWebTips.html
    Then publish your site to a local folder and launch it in the browser by double clicking the index.html file to test it.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I am getting a 404 error message when i try to gain access to creative cloud-for an intial introduction to the program's features

    Can anyone help with me receiving a 4004 error message? Thank you

    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it continues to fail try using a different browser.

  • Error Message When I Invoke my web services : Exception source is: mscorlib' , Stack Trace :System.Runtime.Serialization.SerializationException: Type 'System.ServiceModel.ExceptionDetail' in Assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral,

    Exception source is: mscorlib' , Stack Trace :System.Runtime.Serialization.SerializationException: Type 'System.ServiceModel.ExceptionDetail' in Assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' is not marked
    as serializable.
       at System.Runtime.Serialization.FormatterServices.InternalGetSerializableMembers(RuntimeType type)
       at System.Runtime.Serialization.FormatterServices.GetSerializableMembers(Type type, StreamingContext context)
       at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitMemberInfo()
       at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter,
    SerializationBinder binder)
       at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo)
       at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
       at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
       at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm)
       at System.AppDomain.Serialize(Object o)
       at System.AppDomain.MarshalObject(Object o)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG&amp; msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)

    Hi,
    The forum is main about installation problem of .NET Framework. Your problem is out of support in the forum. You should post your thread to the forum:
    https://social.msdn.microsoft.com/Forums/en-US/clr/threads
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    Screenshot of how it looks when i try to show a ms access form inside a iframe:
    http://oi58.tinypic.com/2vj4ish.jpg

  • Remote web access gives critical error on log in

    SBS 2011 Essentials does set up the domain when using the custom domain at remotewebaccess. Now however, when I try to log in on the website it gives me this error: Cannot connect to Remote Web Access. Contact the person who manages the server. Remote
    Web Access is enabled for all accounts, and I have tried to log into several of them but get the same message.
    Jeremiah Doggett

    OK...  time for more information about your setup.
    What router are you using?
    Is there more than one router on the network (including a modem-router if this is a DSL Internet connection)?
    What is the OS of the external computer through which you are trying to access RWA?
    What are the OS(s) of the network computers at the office?
    >>Ok, just created a test user with admin rights, I can still login to mobile site, but on the desktop version I get the same error!
    So, using an external computer (not an IPhone), you can successfully log into RWA but cannot access (remotely control) any workstations on the network?
    Are you getting any certificate errors?
    Is 'Remote Desktop' enabled on each network workstation? 
    And maybe check out this thread:  (turned out to be a permissions issue for the original poster)
    SBS 2011 Essentials: All 'standard users' keep reverting to inactive status in dashboard
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/bfc5b55e-9b6b-4705-b0a1-49ddbffbf095/
    Merv  Porter
    ============================

  • Error in Remote Web Access - "An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server."

    I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
    An unexpected error occurred.  Please try again.  If the problem continues, contact the person who manages your server.
    Does anyone know how to troubleshoot this?
    Regards,
    Maciek

    I had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
    Troubleshooting Steps:
    1.  We were getting unexpected errors while accessing shared folders remotely
    2.  The tech found IIS handlers were missing
    3.  She went to IIS > server level ( parent level) and added managed handler mapping  :
    Name: svc-Integrated-4.0
    Request path: *.svc
    Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    4. Added script mapping:
    Name: svc-ISAPI-4.0_64bit
    Request path: *.svc
    Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
    Name: svc-ISAPI-4.0_32bit
    Request path: *.svc
    Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
    5. Ran IISreset.
    6. We were able to access resources in Remote access, then.

  • Error message when installing iTunes on my PC:  This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that  this is a valid Windows installer package

    Error message when trying to install iTunes on my Pc:
    Using Windows 7, had to replace hard drive.  HELP!!
    This installation package could not be
    opened. Verify that the package exists
    and that you can access it, or contact
    the application vendor to verify that
    this is a valid Windows installer package

    Hello JAH1961,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

    I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync:  "you do not have enough access privileges for this operation."  It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

    See:
    iPhone - not enough access privileges: Apple Support Communities

Maybe you are looking for

  • Downloads to my Iphone

    I´m quite new into Iphone and I want to know which downloads and applications are available for my Iphone for exp. Google earth. Where do I get them and how do I install them into my device?

  • How do I access and use my iTunes library on a different computer?

    How do I access and use my i Tunes library on a different computer?

  • Windows 7 desktop drops WIFI connection

    Hi - I seem to see a lot of posts with this same problem, but no solution that's relevant to me.  I have a DLink DIR 655 router that has the latest firmware installed (I updated it yesterday). One of the machines on my wireless network is having prob

  • M10 Will Not Boot Up - Suggestions?

    I've got a Valet M10 that's about 16 months old and thus out of warranty. Firmware is up to date. Up until a couple weeks ago, it ran fine with no issues at all. My problem comes when I power up in the morning. All of the lights on the unit begin fla

  • Following an update on Adobe Acrobat 9 Pro

    Today there was a large update to Adobe Acrobat 9 Pro and once the update had installed I keep getting the following message "You cannot use this product at this time.  You must repair the problem by ininstalling and the reinstalling this product or