Error Message when LOV contains no entries
Hello,
I am using Oracle and Forms 10g. I have the following problem.
I have a textfield with a WHEN-MOUSE-CLICK trigger that displays a LOV.
I want when the LOV contains no values to see an error message on the status bar below only. My problem is when I click again on the textfield an error message displays saying that the LOV contains no values.
What I want, is to display the error message on the status bar ONLY and not on a message.
I have tried to do it by setting the :System.Message_level but this method also deletes the message on the status bar.
How can I solve my problem?
Thank you very much
Hello,
If you know the corresponding error message number, you can addd a ON-ERROR trigger on the item that supports the LOV, then trap this message and display yours with the Message( '', no_acknowledge) built-in.
Francois
Similar Messages
-
I tried to download the update but something went wrong so when I open Firefox I get the error message: The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll.
What do I do? DO I reinstall Firefox? And if so, how do I restore my bookmarks?
Thank you so muchIf you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
NIPALU.dll entry point error message when launching application
A previously working application (written in VB6.0, using Measurement Studio 6 and NI-IMAQ1394) now has a fatal error message when starting:
"The procedure entry point _pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll".
This fatal error is only observed on some of our customers' systems, others work fine after the upgrade. WE NEED URGENT HELP!
Attachments:
Error Message Screen Shot.png 8 KBMSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP] -
In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
It says: "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
"iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process.
Any advice????With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
When I try to open Firefox, I get an error message that reads "The procedure entry point ?CreateDrawTargetForCairoSurface@Factory@gfx@mozilla@@SA?AV?$TemporaryRef@VDrawTarget@gfx@mozilla@@@3@PAU_cairo_surface@@ABUIntSize@23@@Z could not be located in the dynamic link library gkmedias.dll.
My only option is to click okay in the Error Message Box, but Firefox will not open then.Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*(32 bit Windows) C:\Program Files\Mozilla Firefox\
*(64 bit Windows) C:\Program Files (x86)\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/ -
I am getting error messages when keying entries into SAP in transaction cod
I am getting error messages when keying entries into SAP in transaction code F-02. It will tell me that an asset doesn't exist in the company code I am posting to when the asset does exist. For example in the parked document 101079622 it tells me that asset WV0707711 doesnt' exist in CoCode . But what is keyed in the document is WV07077 1 1.
And when i look in Transaction AS03 for this asset number it does indeed exist in Co Code. Also if you take these assets out and park it and then go into Transaction FBV2 and add the asset back into the document it will add it and then post to it. This happens often and is very time consuming. I need to know how to fix this without all this additional effortHi,
it is urgent can any one help on this.
Thanks,
Sridhar Reddy.G -
Purchase Order error message when on Sourcing Cockpit.
Hi All,
I have encountered a series of error messages when I try to convert my Shopping Cart into a Purchase Order in SRM 5 within the Sourcing Cockpit. I am using Extended Classic Scenario and have defined the number range in SRM and ECC5. The error messages are below, the moment i try to concert the cart to a Po;
- Internal number range is missing for transaction type. Inform syst. admin
- Transaction type * does not exist. Check entries
- Some backend documents could not be generated, or they contain errors Further Information
- No status object is available for
I have checked the transaaction type, number ranges assignments, attributes in PPOMA_BBP but fail to find the cause.
Any pointers would be welcome!
Thnx,
MikeHi Muthu,
The number ranges are consistent as I have checked the number range for local purchase order and this is set as an internal between the range 3000000000 - 3999999999. On the transaction type for BUS2201 Purchase Order, 30 has been set as the Int Number Range, with all other fields left blank.
The strange thing is that the documents that failed to convert into a PO had been reprocessed in the Application Monitor for Purchase Orders, but when I go back into Sourcing to create the PO, I now get the message:
"You have either failed to select an item, or you cannot create a follow-on document due to an error that has occurred"
Regards
Mike, -
Getting error message when i am trying to update the excel file using script task in ssis package
Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
wbnacomm.RefreshAll()
wbnacomm.Save()
wbnacomm.Close()
excelnacomm.Quit()
Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP] -
I get an error message when trying to update quicktime player
why do i get an error message when i try to update quicktime player that says "the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below".. when i try to locate the file quicktime.msi, i am unable to locate it anywhere on my pc, which then will not allow me to complete the installation, nore will it allow me to uninstall the application.
"the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below"..
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another QuickTime install. Does it go through properly this time? -
Disappearing of error message when i click on f4 help
Hello all,
I've got a little problem with displaying messages in WebUI (CRM 7.0) .
when i do some wrong entries in assingment block and then i press enter then it display error message but
when i click on f4 help the error message got deleted from the ui.
I want error message to be displayed till entry is not filled with right value.
I have written this code in modify method of handler class.
lr_core = cl_crm_bol_core=>get_instance( ).
gr_gmsg = lr_core->get_global_message_cont( ).
gr_gmsg->add_bapi_messages( it_bapi_messages = lt_return
iv_show_only_once = 'X' ).
lv_object_id = lr_bp->get_object_id( ).
lr_msg_cont ?= lr_bp->get_message_container( ).
lr_msg_cont->add_messages(
iv_object_name = me->tv_object_name
iv_object_id = lv_object_id
it_bapi_messages = lt_return
iv_show_only_once = abap_true ).
Regards,
Nawal KishoreHi Nawal,
What is happening now is, the error messages are set to be displayed only once in the Web UI after the message is
added to the message container. In the next round trip these messages will get cleared since you have passed
the parameter 'iv_show_only_once' as true in both the add message methods. You should pass this parameter
value as false in order to retain the error messages on the UI across the round trips. You can simply remove that
parameter from the method as by default this parameter takes the value as 'false'.
Regards
Leon
[SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910] -
Error message when I calling planning layout in the STS
Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
- Create Sub Plan & Session
- Asssign Hierarchy to Sub Plan
- Determine attribute for created planning session ( Bottom-up, Auto mail )
- Define Header characteristics for planning session to contains the planning package completely.
- Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG -
Error messages when I attach iPad;
I keep getting an error message when I attach my iPad/iPhone and try to go to iTunes:
"The registry settings used by the iTunes drivers fro inmportng and burning CDS and DVDs are missing. This can happen as a result of installing other CD burning software. Please install iTunes" I HAVE UNINSTALLED, INSTALLED SEVERAL TIMES; TRIED "REPAIRING", TOO.
It took an hour to load 10 songs last night to iTunes from a CD to load on iPad/Phone.NO, you have to edit the registry like below (do it with extreme care):
Open Registry Editor:
XP: From the Start menu click Run. In the resulting dialog, type "regedit" (without quotes) and click OK.
Vista: From the Start menu, in the Start Search dialog, type "regedit" (without quotes) and press Enter.
Windows 7: From the Start menu, in the "Search programs and files" dialog, type "regedit"(without quotes) and press Enter.
If Windows needs your permission to continue, click Continue.
Click the plus sign (XP) or arrow (Vista and Windows 7) next to HKEY_LOCAL_MACHINE to expand its contents.
Expand the contents of SYSTEM.
Expand the contents of CurrentControlSet.
Expand the contents of Control.
Expand the contents of Class.
Click to select the heading that begins with "{4D36E965-" (you just need to highlight this folder). It should look like this:
From the File menu, click Export.
In the dialog box that appears, make sure the "Selected branch" radio button is enabled, then save the file somewhere that you can find it later. This is a backup of this registry key. You should hang on to this in case you need to reimport your original settings later.
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
If the UpperFilters entry is missing, follow these instructions: Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.
In the window that appears, use the appropriate steps below to add iTunes device filter to the "Value data" box. If the "Value data" box already contains text, follow these instructions: The text contained in the "Value data" box represents third-party device filters. If you remove these device filters, the third-party software that installs them may stop functioning properly. In the example below "NTIDrvr" and "SiRemFil" represent these third-party device filters.
Click in the box below this text. This accomplishes two things. First, it removes the highlighting from the text. This way when you start typing it won't overwrite these device filters. Second, it places the cursor below this text.
Now, type "GEARAspiWDM" (without quotes) to add the iTunes device filter.
If the "Value data" box is blank, follow these instructions:
Type GEARAspiWDM to add in the iTunes device filter. See the example below.
Continue on with the next step.
Click OK.
Restart the computer. -
Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
Have repaired , reinstalled , created and used a restore point etc etc
How do I fix this !!! Please...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?
Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2
Maybe you are looking for
-
How can i use Ipad's ITunes movies with Samsung 52 inch LED HDTV LN52B750U1F
Hi there and happy holidays! I have a LN52B750U1F 52 inch TV and for the first time ever want to play iTunes movies from my iPad on the TV. I tried reading the manual but it is all gibberish to me - I am a tech idiot. I plugged the USB into both o
-
Can i use usa itunes store in the other countries if i have an account without credit card number
I'm inside the States and using US iTunes store on my iphone 4s (contract free). However I have an account without credit card number. I wonder if I am able to use US iTunes store connected with this account outside the States (say in Russia or Armen
-
How do I remove all apps from my iPhone?
How do I bulk remove all apps from my iPhone? There has to be a better way than removing each one manually. Thanks.
-
So, my ipod will not stay on, when I take it off the charger it just goes dead. I cannot plug it into the computer and have it go on; I guess it doesn't have enough power for the battery. But, just the other day, I unplugged my ipod (went dead) plugg
-
HT201317 how to delete photos from photo library iphone4s
how to delete photos from photo library iphone4s?