Error message when opening Encore

Hi there.  I have been working with CS5 just fine for several weeks now and have burned several different projects without issues.  However, when I opened up Encore this morning to start building a DVD, I got this message: Adobe Encore.exe - No Disk.  There is no disk in the drive.  Please insert a disk into drive \Device\Harddisk5\DR5.
My options to this error message is "Cancel", "Try Again", and "Continue".  At some point or another, I have hit every one of these buttons and after several clicks, the message dissappears.  I then try to open my project and it loads to 6% before becoming non-responsive.  I've loaded several different ones of different sizes and still the same thing.  I have reinstalled Encore - no change.  I have restarted my computer - no change.  Pro is working just fine and have had no errors with it today.  One other error message I have gotten is the same except it says at the top of the box "PProHeadless.exe - No Disk". 
Any ideas?  As I said above, this computer has not had an issue before and nothing as been done to this since the last time we successfully built and burned a DVD (no new software/hardware, etc).
Running Windows 7 64-bit

I am not sure what to check for in regards to the Windows Event Viewer...
Me either, but once upon a time, the application involved was not what I thought, and I was able to quickly solve the problem. The application is one of the things a windows event log identifies. I suspect you are seeing the application that is identified in the header for the error window that pops up  (encore.exe and pproheadless.exe), but perhaps not.
I would also look for other errors in the logs, that may not be popping up, involving the drive info you saw.
I would look first in the Windows Logs -> Application.
I suspect a non-Encore cause (e.g. a windows update) that fouled something up.
I would also treat this as an Encore crash that is not limited to a corrupted project:
Troubleshoot system errors and freezes | Adobe software on Windows
http://kb2.adobe.com/cps/822/cpsid_82252.html
I would start by resetting preferences and also running as administrator.

Similar Messages

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • Error Message when open iTunes -42032. What can I do?

    Error Message when open iTunes -42032. What can I do?

    Try 2 solutions: 1.  Press both Ctrl and Shift keys then double click on ITunes.  Hold keys down until a box appears on screen indicating ITunes is starting in "safe mode'.  left click on 'continue" and ITunes will run without closing.
    2;  Start ITunes normally, then  after loading, choose "Match" and then touch "stop" beforre step 3 , Uploading songs...",  runs for more than a few seconds.  The code problems are in Match;  the uploading function in Match.  ITunes won't crash if you stop Match soon enough!

  • Error message when opening a document "this document is being used by another user

    error message when opening a document "this document is being used by another user, do you want to make a copy?
    I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
    Any suggestions?

    Hello MrNeuf,
    I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
    Mac OS: How to release and renew a DHCP lease
    http://support.apple.com/kb/TS1920
    Cheers,
    Allen

  • Error message when opening CS6 files in earlier versions

    PSCS6 with 12.0.4 update.  Mac OSX 10.8.2   16GB 1333 Mhz DDR3  543 GB Available
    I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version).  The message is:
    This document contains unknown data which will be discarded to keep layers editable.  To preserve the original appearance instead, choose flatten to load composite data as a flattened image. 
    Three options follow:  Flatten  Cancel  Keep Layers
    When 'keep layers' is selected the file opens as normal.  However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
    I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should.  Those on very early version of PS can also open the files without any issues. 
    I've been using CS6 since it was released and have had to delve through all my files and save them in CS5.  Not every file is affected and I've been unable to find a common thread.
    Hoping someone can throw some light on this.

    This similar to the message one should get in an older version of photoshop such as photoshop 7.
    If one presses ok instead of read composite that might preserve the layers with the original look.
    But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
    You said your using shape layers?
    If they are shape layers you didn't use a stroke from the tool options bar?
    Can you post an example of the image with the layers panel visible that you get that message with?
    I guess your using photoshop cs6 with the 13.01 update?

  • Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

    Hi
    Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
    Thanks
    Colin65

    Steve,
    Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
    Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
    Also please find details of storage devise,
    Dogcam Portable Media Center PMC-500r
    Quick DetailsModel Number:PMC-500R
    SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
    PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

  • Error message when opening Photoshop CC

    For the last month, I've been getting an error message when opening Photoshop CC that says:
    "Could not load actions because an unexpected end-of-file was encountered"
    I've been having to go back and use CS5 in order to get anything accomplished between this and my plugins not showing up (post about plugins in another thread).

    See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

  • I had to reinstall CS4 and now have error messages when opening bridge and photoshop

    The error message is "The specified module could not be found. C:\Program Files (x86)\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL

    I tried what you suggested and it did not help.  whenever I try to open either photoshop or bridge, I get a message saying that there was a problem loading scripts the last time that Bridge was open and do I want to try loading them again?  If I click yes, I get that same error message that I reported in my original question and photoshop/bridge will immediately close.  If I click no, photoshop and bridge will open but it will not let me open a raw format document.  It seems like Adobe Camera Raw is not being recognized.   One of the updates I downloaded was an update to Adobe Camera Raw so the functionality is there, it just can't be accessed.  do you think I should try to uninstall and re-install Photoshop again?
    Date: Mon, 3 Sep 2012 19:48:31 -0600
    From: [email protected]
    To: [email protected]
    Subject: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        Re: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Go To Help->Updates and install the latest update. It should work.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670793#4670793
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670793#4670793. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

    I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

    What is the file?
    Where did you get it from?
    Allan

  • Fatal Error Message when opening PhotoshopCS4

    I am receiving a fatal error message when opening photoshop cs4. "Fatal Error -Missing Component (/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework" I was recently using the trial version of Photoshop CS5.1 but that trial period has ran out. Now I cannot open my file in CS4. Within that trial period, I also switched from using Snow Leopard to Lion OS. Could anyone shed some light on the issue?! I need to get some work done!

    See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

  • I always got error message when opening BlackBerry App World using 3g

    Hi there, I always got error message when opening BlackBerry App World using 3g network, but it's fine if I open it through wifi network. Does anyone ever had the same problem and how to fix it? Thanks.

    You need the latest version of BlackBerry World installed on your smartp

  • Error message when opening itunes; won't update or uninstall itunes

    a few months ago, i downloaded the new version of itunes and safari together. once downloaded, my computer restarted and wouldn't turn back on. i repeatedly attempted to run my computer but, once it was turned back on, it just stayed on a solid black screen. finally, and by some random occurrence, my computer came back on and ran normally with one exception, i got an error message every time i tried to open itunes. when i click on itunes to open it, i get a message that says "this action is only valid for products that are installed" itunes is most certainly installed on my computer. i then tried to reinstall the new version of itunes, but it tells me it can't locate itunes.msi. and i get the same message when i try to uninstall it.
    i tried to go through my OS (C:), then program files, and then right-click on itunes and delete it, but i constantly get a message that says "permission is required" so i select try again.
    i also tried to download the Windows Installer CleanUp Utility, but that too gives me an error message when i try to run it.
    i'm hopeless! pleeeeeease help me.

    i also tried to download the Windows Installer CleanUp Utility, but that too gives me an error message when i try to run it.
    Is that an 800A0046 error, megan?
    If so, can you get CleanUp to install if you do a run as administrator, as per the following document?
    [Error "800A0046 - Permission Denied" when installing the Windows Installer Cleanup Utility in Windows Vista|http://www.winhelponline.com/articles/170/1/Error-800A0046---Permission-D enied-when-installing-the-Windows-Installer-Cleanup-Utility-in-Windows-Vista.htm l]
    If you're getting a different error message from CleanUp, let us know what it says. (Precise text, please.)

  • Error message when opening SAP

    Hello,
    Sometimes, when a windows session locks itself when the logonpad is open, we get the following error message when we try to log back in SAP:
    PRD: GSS-API(maj): No valid credentials provided (or available)
    GSS-API(min): No Kerberos SSPI credentials available for requested nam
    name=''p:arsenaultd at ADMTL.COM''
    Error at the SNC level

    Dear,
    Check: http://wiki.sdn.sap.com/wiki/display/JSTSG/(SIM)Problems-P66
    Re: SSO using SNC and Kerberos (Windows 2003)
    Regards,
    Syed Hussain.

  • Error Message When Opening Interactive Demand Planning

    Hello Experts,
    I have one user who is receiving the following error message when trying to open Interactive Demand Planning Workbook.  Only one user is experiencing this issue.  Has anyone run into this before? 
    GP: Graphics product not available in this system; see long text
    Message no. APPLG225
    Diagnosis
    The required graphics product is not available on the current platform. It is either not permitted, or it does not work properly.
    The application does not have a fallback strategy.
    Procedure
    Application/Specialists
    Contact your developers to see if a fallback strategy can be implemented.
    Development
    Check the call method of the graphics proxy. If the graphics product is not mandatory (parameter FORCE_PROD), then the graphics proxy can select a different graphics product that is available on this platform.

    Dear Adam,
    The prerequisite for graphics in planning folders is the SAP Internet Graphics Server. The connection between the SAP Internet Graphics Server and the system in which you operate BPS must take place using an RFC destination of the type TCP/IP with the predefined name IGS_DEST_POFO.                                                          
    Please make sure that your settings are correct and check the online help at:   http://help.sap.com/saphelp_sem320bw/helpdata/en/05/                  
      242537cedf2056e10000009b38f936/frameset.htm                                                                               
    Planning Folder                                                         
      > Editing a Planning Folder: Details                                  
          >Planning Folder: Portfolio Graphic"                                                                               
    Please have a look at the following notes as well that helped to solve problems with the IGS. 454042 IGS: Installing and Configuring the IGS                          
    676532 Dumps in transactions with splitter containers                   
    I hope this helps.
    Regards,
    Tibor

  • Error message when opening Photoshop...

    I keep getting the same error message when I go to open up Photoshop and Illustrator CS4  (don't remember the exact words) but
    to this effect:  the original application has moved and needs repair..... click to repair....?  Anybody got any ideas on this one?

    Have You moved the program-folder or some of it’s content possibly unintentionally?

Maybe you are looking for

  • Pictures in iPhoto do not show up after being moved to external hard drive.

    I moved an iPhoto library to an external hard drive.  When I created this library I did not tick on "Copy items to the iPhoto library" when importing.  I wanted to keep the pictures in the folders neatly.  These folders were moved to the external har

  • Is there a default setting for the Preview Pane Zoom level?

    I want to have my default zoom level of my preview pane set to "Fit to Window" Mine is default set to 100%. This is too big. I can not find the option.

  • Error in Batch input : Call Transaction

    Hi Gurus, I have written a BDC for tcode "S_ALR_87013620" to send the report output to spool. When I recrod from menu Report->Print i get the dialog box to to enter the printer name. and then i get a popup box saying "Format is X_65_132" then i press

  • Error when combining Power Point docs into PDF in Acrobat 11

    Hi,  Am running Acrobat 11 and am getting an error when attempting to combine files.  Trying to combine multiple power point 2007 files into a single PDF using Acrobat 11.  Am getting an error "unable to find Adobe PDF resource files.  Do you want to

  • How do get a mounted drive to always be shown in 'devices'?

    Hello, some time ago, I accidentally clicked "remove" on a mounted drive which was shown in the devices section of finder, on the left. Now, whenever I mount a drive on my desktop, it doesn't show in devices unless I drag it there - and then disappea