Error message when opening Photoshop CC

For the last month, I've been getting an error message when opening Photoshop CC that says:
"Could not load actions because an unexpected end-of-file was encountered"
I've been having to go back and use CS5 in order to get anything accomplished between this and my plugins not showing up (post about plugins in another thread).

See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

Similar Messages

  • Error message when opening Photoshop...

    I keep getting the same error message when I go to open up Photoshop and Illustrator CS4  (don't remember the exact words) but
    to this effect:  the original application has moved and needs repair..... click to repair....?  Anybody got any ideas on this one?

    Have You moved the program-folder or some of it’s content possibly unintentionally?

  • Air Error Message when opening Photoshop

    Hello,
    I'm getting an Adobe Air error message when I open Photoshop (on Windows 7 Enterprise 32-Bit), "Adobe Air - The installation of this application is damaged". I've tried uninstalling and reinstalling the current release of Air, tried reinstalling an older version of Air, tried deleting Air using the Microsft "Fix It" app and then reinstalling Air, tried deleting all instances of Air including manually removing anything in AppData and then reinstalling Air, tried the Air Zapper script that I found in the Adobe Forums and then reinstalling Air, tried uninstalling both Photoshop and Air and reinstalling but everytime I open Photoshop I receive that error message. Even with Air uninstalled I still receive the error message. It does seem to be happening in only one profile though, Photoshop opens fine in other profiles. I'm open to any suggestions...Thank you in Advance!!!

    Here is the install log:
    [2011-12-07:15:41:59] Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    [2011-12-07:15:41:59] Commandline is:
    [2011-12-07:15:41:59] No installed runtime detected
    [2011-12-07:15:42:06] Relaunching with elevation
    [2011-12-07:15:42:06] Launching subprocess with commandline c:\users\horvath\appdata\local\temp\air4c8c.tmp\adobe air installer.exe -ei
    [2011-12-07:15:42:08] Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    [2011-12-07:15:42:08] Commandline is: -stdio \\.\pipe\AIR_5696_0 -ei
    [2011-12-07:15:42:08] No installed runtime detected
    [2011-12-07:15:42:08] Starting silent runtime install. Installing runtime version 3.1.0.4880
    [2011-12-07:15:42:08] Installing msi at c:\users\horvath\appdata\local\temp\air4c8c.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
    [2011-12-07:15:42:10] Runtime Installer end with exit code 0
    [2011-12-07:15:42:10] Elevated install completed
    [2011-12-07:15:42:11] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
    [2011-12-07:15:42:11] Runtime Installer end with exit code 0
    [2011-12-07:15:42:12] Runtime Installer begin with version 3.1.0.4880 on Windows 7 x86
    [2011-12-07:15:42:12] Commandline is: -installupdatecheck
    [2011-12-07:15:42:12] Installed runtime (3.1.0.4880) located at c:\Program Files\Common Files\Adobe AIR
    [2011-12-07:15:42:12] Performing pingback request
    [2011-12-07:15:42:12] Pingback request completed with HTTP status 200
    [2011-12-07:15:42:12] Starting runtime background update check
    [2011-12-07:15:42:12] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update
    [2011-12-07:15:42:12] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.1.0.4880/update to C:\Users\horvath\AppData\Roaming\Adobe\AIR\Updater\Background
    [2011-12-07:15:42:13] Runtime update not available
    [2011-12-07:15:42:13] Unpackaging cancelled
    [2011-12-07:15:42:13] Runtime Installer end with exit code 0
    Been battling this for some time now, really hoping someone can help point me in the right direction... Thanks!

  • Error Message when opening Photoshop CS5: CoreFoundation.dll missing

    Hello... and thank you for your help,
    I downloaded my upgraded version of CS5 yesterday. I am running Windows 7.
    I did not have a problem with the download or with accessing it. CS4 is still loaded on my computer.
    Toady I started copying plugins and loading actions from CS4 to CS5. All of that went well too. I also tried to open CS4 while CS5 was open (and vice versa) to manually copy my Preference settings to CS5. When either was already open and I tried to open the other version, the other version merely reopened the version that was already opened.
    At some point during this transitioning process, I opened up CS5 and received an error message that "The program can't start because the CoreFoundation.dll is missing from your computer..." I searched for this .dll file and found several entries, two of which are in CS4 and CS4 (64 bit).
    How do I correct this? What happened? Also, do I need to keep my CS4 versions -- and are they causing the problem?
    Thank you so much for your help,
    Guy

    Thanks so much, Chris.
    The 64bit version of CS5 opens perfectly... and when I open this version first, then close it and open the 32 bit version (the one with the problem), the 32 bit version opens the first time without the error. The next time I open it, the error returns.
    The 32 bit and 64 bit CS4 versions have these .dll files in them. Would copying one of these files to the CS5 version correct the problem? Should I uninstall and reinstall CS5 all together?
    Thank you again.
    Guy
    PS Interesting that you mention iTunes. iTunes works fine except I haven't been able to open the iTunes store for two months... and Apple doesn't know why. (They stopped trying a month ago.) Also, one of their techs told me I can't delete Quicktime without damaging iTunes(?)

  • Fatal Error Message when opening PhotoshopCS4

    I am receiving a fatal error message when opening photoshop cs4. "Fatal Error -Missing Component (/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework" I was recently using the trial version of Photoshop CS5.1 but that trial period has ran out. Now I cannot open my file in CS4. Within that trial period, I also switched from using Snow Leopard to Lion OS. Could anyone shed some light on the issue?! I need to get some work done!

    See my reply #1 in your other thread http://forums.adobe.com/thread/1419961?tstart=0

  • I had to reinstall CS4 and now have error messages when opening bridge and photoshop

    The error message is "The specified module could not be found. C:\Program Files (x86)\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL

    I tried what you suggested and it did not help.  whenever I try to open either photoshop or bridge, I get a message saying that there was a problem loading scripts the last time that Bridge was open and do I want to try loading them again?  If I click yes, I get that same error message that I reported in my original question and photoshop/bridge will immediately close.  If I click no, photoshop and bridge will open but it will not let me open a raw format document.  It seems like Adobe Camera Raw is not being recognized.   One of the updates I downloaded was an update to Adobe Camera Raw so the functionality is there, it just can't be accessed.  do you think I should try to uninstall and re-install Photoshop again?
    Date: Mon, 3 Sep 2012 19:48:31 -0600
    From: [email protected]
    To: [email protected]
    Subject: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        Re: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Go To Help->Updates and install the latest update. It should work.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670793#4670793
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670793#4670793. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Error message when opening CS6 files in earlier versions

    PSCS6 with 12.0.4 update.  Mac OSX 10.8.2   16GB 1333 Mhz DDR3  543 GB Available
    I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version).  The message is:
    This document contains unknown data which will be discarded to keep layers editable.  To preserve the original appearance instead, choose flatten to load composite data as a flattened image. 
    Three options follow:  Flatten  Cancel  Keep Layers
    When 'keep layers' is selected the file opens as normal.  However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
    I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should.  Those on very early version of PS can also open the files without any issues. 
    I've been using CS6 since it was released and have had to delve through all my files and save them in CS5.  Not every file is affected and I've been unable to find a common thread.
    Hoping someone can throw some light on this.

    This similar to the message one should get in an older version of photoshop such as photoshop 7.
    If one presses ok instead of read composite that might preserve the layers with the original look.
    But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
    You said your using shape layers?
    If they are shape layers you didn't use a stroke from the tool options bar?
    Can you post an example of the image with the layers panel visible that you get that message with?
    I guess your using photoshop cs6 with the 13.01 update?

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • Error message when downloading Photoshop element 12 : Arvato Berthelman - Erreur de l'Assistant de téléchargement - Malheureusement, il y a un problème avec le lien vers ce fichier. Ce problème peut être dû au nombre d'utilisateurs en train de télécharger

    Error message when downloading Photoshop element 12 : (I have bought the licence in a shop)
    Arvato Berthelman -
    Erreur de l'Assistant de téléchargement -
    Malheureusement, il y a un problème avec le lien vers ce fichier. Ce problème peut être dû au nombre d'utilisateurs en train de télécharger le fichier, ou le produit peut ne plus être disponible. Veuillez réessayer dans quelques minutes. Si ce lien n'est toujours pas disponible, veuillez contacter le service clientèle à l'adresse [email protected] ou au numéro 604-915-5200.
    ==> BOTH @ and phone number are wrong !!

    Hi Mireille56,
    From where are you trying to download the software.
    [email protected] is not an Adobe Support email.
    Please try downloading Photoshop Elements 12 from : http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM
    Regards,
    Rave
    < Translated via Google >
    Salut Mireille56,
    D'où que vous essayez de télécharger le logiciel.
    [email protected] n'est pas un e-mail de support d'Adobe.
    S'il vous plaît essayez de télécharger Photoshop Elements 12 à partir de: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM
    Cordialement,
    Rave

  • Error Message when open iTunes -42032. What can I do?

    Error Message when open iTunes -42032. What can I do?

    Try 2 solutions: 1.  Press both Ctrl and Shift keys then double click on ITunes.  Hold keys down until a box appears on screen indicating ITunes is starting in "safe mode'.  left click on 'continue" and ITunes will run without closing.
    2;  Start ITunes normally, then  after loading, choose "Match" and then touch "stop" beforre step 3 , Uploading songs...",  runs for more than a few seconds.  The code problems are in Match;  the uploading function in Match.  ITunes won't crash if you stop Match soon enough!

  • Error message when opening a document "this document is being used by another user

    error message when opening a document "this document is being used by another user, do you want to make a copy?
    I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
    Any suggestions?

    Hello MrNeuf,
    I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
    Mac OS: How to release and renew a DHCP lease
    http://support.apple.com/kb/TS1920
    Cheers,
    Allen

  • Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

    Hi
    Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
    Thanks
    Colin65

    Steve,
    Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
    Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
    Also please find details of storage devise,
    Dogcam Portable Media Center PMC-500r
    Quick DetailsModel Number:PMC-500R
    SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
    PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

  • HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

    I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

    What is the file?
    Where did you get it from?
    Allan

  • I always got error message when opening BlackBerry App World using 3g

    Hi there, I always got error message when opening BlackBerry App World using 3g network, but it's fine if I open it through wifi network. Does anyone ever had the same problem and how to fix it? Thanks.

    You need the latest version of BlackBerry World installed on your smartp

Maybe you are looking for

  • Missing preferences, tool bars, menu items after receiving CS3 file while I have CS2

    I have Indesign CS2. I rec'd a CS3 file not knowing it was CS3. A message appeared as follows: Cannot Open. Please upgrade your plugins to the latest versions, or upgrade to the latest edition of Indesign. I went into HELP, Configure plugins. Chose "

  • How to update changed data in alv grid.

    hi experts, i have a editable alv report how to update the changed data on the grid to database table when i click save. can anybody tell me how to do this if possible with example. thanks in advance. regards, venu

  • Prolem building DB's in Oracle 8i over nt 4.0

    Dear All, After finishing installation of 8i over NT 4.0. when i am trying to create Database its giving an Error " ORA-04031: Unable to allocate 93530872 bytes of shared memory " shared pool " unknown object " sga heap " db_block_buffers. Pls help m

  • Remove Namespace Prefix from SOAP response

    Hi I have a File-XI-SOAP scenario. I pass data from the file to SOAP. If the data is good, I receive a Response and If the data is bad I get an fault message called AccountUtilsException. But I am not able to read this message properly. The message w

  • How to programmatically set item value

    I created button ‘Accept ALL’ within region to set all values of field to ‘Y’ when clicked on and another button ‘Reject ALL’ to set all field values to ‘N’. Values are intialy derived from Region Source (partial query only): ...DECOD