Error message when posting revaluation "deprecation not posted completely"

Hi Gurus
When I am trying to post revaluation to an asset, using AR29, I get an error message APERB027 "deprecation not posted completely".
I have run AFAB for period 01/2010 and the entry in TABA is correct.
Can any one help me solve this?
Thanks
Gil

Hi
I am trying to post revaluation for 31.01.2010 (asset was capilized on 01.01.2010)
I have ran AFAR, and it didn't have any effect

Similar Messages

  • When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

    One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
    When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
    Any suggestions? Thank you in advance!

    I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
    Mount the TC sparsebundle and verify it using disk utility.
    A5 here. http://pondini.org/TM/Troubleshooting.html
    You might also like to load the widget in Time Machine so you get whatever the full error message is..
    I cannot find any reference to the error code you are getting..
    My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
    Use the manual methods pondini recommends.
    http://pondini.org/TM/FAQ.html
    Q16 17
    Use ethernet only. Turn off wireless so it does not enter the situation.

  • I get an error message when downloading ITunes :could not access the network location %public%\desktop\

    I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
    windows vista 32 bit

    Try the following user tip:
    "Could not access network location %PUBLIC%\Desktop\" install errors

  • HT4859 Can't backup my Iphone to Icloud. Keep getting error message, "The last backup could not be completed".  Any suggestions?

    I keep getting error message, "The last backup could not be completed" when trying to backup Iphone to Icloud.  I have plenty of storage space.  Phone is plugged in, connected to WI-FI & is locked.  Does anyone know what is wrong?  Thanks

    HELP!  Is there anyone out there who knows how I can fix this????
    Thanks!

  • Having problem purchasing credit on my apps.....giving me an error message that my purchase could not be completed  for assistance contact itune support

    having problem purchasing credit on my apps.....giving me an error message that my purchase could not be completed  for assistance contact itune support

    If you haven't already done so, then to do so as the message says and contact iTunes Support (these are user-to-user forums) :
    - go to http://www.apple.com/support/itunes/ww
    - click on your country's flag
    - click on the Contact Support at the bottom of the left-hand column
    - click on Contact iTunes Store Support on the right-hand side of the page
    - then Purchases, Billing & Redemption

  • TS3992 I keep getting an error message "the last backup could not be completed" every time I try to backup my iPhone manually.  It's been almost two months since the last successful backup!

    My iPhone 4s will not backup. I've tried repeatedly but keep getting the message "the last backup could not be completed".  It's been nearly two months since the
    last backup.  However, my iPad2 is backing up perfectly.  Any thoughts???????

    Try the following steps:
    Plug your iPod Touch to your Mac/PC using USB cable.
    Open iTunes software and choose “backup to this computer” .
    Then you need to do a sysncing.
    Go to iCloud (iPod Touch: Settings > iCloud) and delete all previous backups.
    Then in iTunes, Turn on “backup to iCloud” again.
    On your iOS device, now you are able to backup to iCloud.

  • When I went to back up my MacBook to an external hard drive, an error message said the backup could not be completed because an error occurred when creating the backup folder.

    I used a backup hard drive for my previous PC, but I have not done a backup on my MacBook yet, which I got this summer. When I hooked it up to my computer, it started the backup fine, and then my computer went to sleep, and so I closed it to let it back up overnight. The next morning I saw that it had been interrupted, and that an error occurred; the backup could not be completed because there was an error in creating the backup folder. I'm not sure what to do now because my data has been erased off of my hard drive now to prepare for the backup on my MacBook, but will I be able to use this hard drive again? Will the error message always come up?  Is there anything I can do to fix it?

    I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
    Mount the TC sparsebundle and verify it using disk utility.
    A5 here. http://pondini.org/TM/Troubleshooting.html
    You might also like to load the widget in Time Machine so you get whatever the full error message is..
    I cannot find any reference to the error code you are getting..
    My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
    Use the manual methods pondini recommends.
    http://pondini.org/TM/FAQ.html
    Q16 17
    Use ethernet only. Turn off wireless so it does not enter the situation.

  • Error message when Database details are not configured properly

    Hi,
    I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
    I use Weblogic Data Source connection to connect to Database.
    I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
    Can I achieve this???Please advice.
    Regards,
    Praveen

    Praveen,
    Check out Steve's example
    https://blogs.oracle.com/smuenchadf/resource/examples#129
    -Arun

  • How to pop up error message when printing invoice / delivery note

    i have a problem that when I'm going to print the invoice (VF03), i have to check the field displayed e.g. port of loading, final destination should not be empty.If both are empty, when user is ready to print, then alert message is displayed (e.g. Please return to the invoice to fill in the port of loading / final destination) and is not allowed to print it out
    i'm using Zxxxxx program (including the subroutine)  and SAPScript form Zxxxxxx ,in the form, i use "PERFORM XXX IN PROGRAM ZXXXX" to call the parameter,so how can I do the alert message and stop the printing process and Do i write a checking subroutine in the program and perform that subroutine , so that when that required fields are empty, then show alert when printing?
    PLs advise

    Hi Sky,
    i wont suggest you to give a pop up as if you try and execute the invoice in background it would cause termination.
    Standard way of doing it is by updating nast entries. You can refer below mentioned pseudo code. You can also refer to any standard driver program & form attached to a output type for  more code.
    The below code would show your output condition in error status if your condition fails.
    **Do you validations in the print program and  check for return code.
      IF SY-SUBRC NE 0.
        PERFORM PROTOCOL_UPDATE.
        RETCODE = 1.
        EXIT.
      ENDIF.
          FORM PROTOCOL_UPDATE                                          *
          The messages are collected for the processing protocol.       *
    FORM PROTOCOL_UPDATE.
      CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
           EXPORTING
                MSG_ARBGB = SYST-MSGID
                MSG_NR    = SYST-MSGNO
                MSG_TY    = SYST-MSGTY
                MSG_V1    = SYST-MSGV1
                MSG_V2    = SYST-MSGV2
                MSG_V3    = SYST-MSGV3
                MSG_V4    = SYST-MSGV4
           EXCEPTIONS
                OTHERS    = 1.
    ENDFORM.
    Hope this Helps you.
    Sumit

  • HT1386 Received this error message when syncing iPad: Could not sync apps to iPad because apps installed on the iPad could not be determined. I have no idea what apps it could refer to. It's my daughter's iPad.

    Error when syncing my daughters iPad: "Could not sync apps to iPad because apps installed on iPad could not be determined."
    I have no clue where to go from here. Any ideas?

    https://discussions.apple.com/message/17259204#17259204
    https://discussions.apple.com/message/16469359#16469359

  • Error message when importing from CD -Not enough room on "" to copy all of

    I am just importing CD music onto my laptop and after 316 songs I get the erro message, "There is not enough room on "" to copy all of the requested files. iTunes will copy as many files as possible."
    Why the error and how do I fix it?

    I am having the same problem and I know my hard drive is definitely not full

  • Error message when syncing; "required disc not found" ???

    when i try syncing i get the message that the required disc was not found,, what disc!? it never acted like this before. any helpp is greatly appreciated

    it means a USB adapter. one that is connected to your computer in order to give you more USB ports than are built into your machine.

  • Error message when installing Lion "disk not formatted as Mac OS extended journalled".

    Ran disk utility repair from Snow Leopard install disk. Same error.  Is there a way to enable journalling without erasing disk and reformatting? I have a TIme Machine back up but am nervous doing a compete erase and restore.

    Not according to the last reply in this thread:
    https://discussions.apple.com/thread/3293781?tstart=150
    Regards,
    Colin R.
    PS Time Machine restore instructions here:
    http://web.me.com/pondini/Time_Machine/14.html

  • Updated to Yosemite a few weeks ago and I'm now being confronted with a plug-in error message when loading illustrator. Not sure what to do.

      this is a screen grab of the plug in errors.
    Any body know how to fix this????

    Did you reinstall your AI from the original disks or a clean download after updating to Yosemite? Adobe products don't take kindly to migration or in place updates of the OS.

  • I have not been able to sync my iPad with my pc. It runs for an hour, never gets past the backing up stage and then gives me an error message that the action could not be completed. Any suggestions?

    ?

    Several things to try.
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
    Disable your firewall and anitvirus software temporarily. 
     Cheers, Tom

Maybe you are looking for