Error message when recovering

Note: EliteBook 8460p
OS: Original W7 Profesional
Error message: Windows failed to start.
I am trying to restore to factory settings my note but when pressing F11 when booting my machine it either goes to Windows or display the messages shown below, when choosing "Enter" it goes to another screen allowing me to boot Windows .
The recovery partition is present on my machine

I found a reference to a reference to a possible problem here and I applied this patch but it didn't change a thing.
The log, shown below, appears to have found my system all right "Found WIM. No need to do anything."
Still F11 not working
Mounting HP_RECOVERY at C:\Users\JEANLU~1\AppData\Local\Temp\f11patchmount
Executing (\\KALGOORLIE\ROOT\CIMV2:Win32_Volume.DeviceID="\\\\?\\Volume{df649fe3-ffc6-11e0-9cb8-402cf413e21d}\\")->AddMountPoint()
Method execution successful.
Out Parameters:
instance of __PARAMETERS
ReturnValue = 0;
Getting architecture we are running under...
Running under 64-bit
Found WIM. No need to do anything.
Executing (\\KALGOORLIE\ROOT\CIMV2:Win32_Volume.DeviceID="\\\\?\\Volume{df649fe3-ffc6-11e0-9cb8-402cf413e21d}\\")->Dismount()
Method execution successful.
Out Parameters:
instance of __PARAMETERS
ReturnValue = 4;
Finished running the patch.

Similar Messages

TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

HT4623 While trying to sync my ipad, it became stuck in the recovery mode and I get error messages when I try to recover

While trying to sync my IPAD with ITUNES, my IPAD when into recovery mode and I keep getting error messages when I try to recover it.

What might these error messages say?

HT204053 I am getting an error message when trying to sign into my icloud. Help

Why do Iget an error message when trying to sign in my icloud? Can you also tell me how to combinned my icloud accounts?

If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup. If you restored the entire backup you should recover them.

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

I am receiving an error message when trying to open any application in the Office for mac suite
Any suggestions??

Hello
you can try - remove and re-install microsoft office
you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
you can try use font book too detect font conflict / problem
you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
HTH
Pierre

Error message when opening project.

Hello,
I get an error message when I try to open a project which I've been working on for the last couple of weeks.
It looks like this:
Any tips on how to get it to work again, or am I screwed?
I've tried to restart Captivate aswell as the computer. The file is not an attachment and I've been working on it every day the last weeks, been working just fine. There's still hard disk space left, so shouldn't be an issue either.
Any help is appreciated.
Kind regards,
Patrik

I was referring to the Preference option in Captivate to create backup files. Did you have this turned on?
Working over a LAN on any Captivate project file is not recommended because a glitch in the network traffic during a save action can corrupt your project file. This may in fact be what has happened in your case.
When you say the file was "only saved on my hard drive" do you mean that you saved the project file to your hard drive before opening it each time you work on it? If so, this is highly recommended.
Look to see if you have a backup version of your file (look in the same location as the project file and see if you have another file there about the same size with the same name but backup on the end).
If there is no backup file then you may be able to restore the project by using the Captivate cache files.
See this link for instructions about how to do that:
http://blogs.adobe.com/captivate/2010/09/recovering-the-project.html

Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder... How can I fix this?
Please help me!

You don't need to recover the system.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
dot_clean -m
Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

Getting error message when I attempt to update my apps. Error says This app Is Incompatible with this iPad.

I am getting an error message when I attempt to update my apps. It says "This App Is Incompatible with This iPad" Have never had this problem before, any suggestions?

Hello Jones The Steam
Check the App to see what Apple ID it is associated with. If it is with another Apple ID, you would need to delete it and download it with your current Apple ID.
Recovering a forgotten iTunes Store account name
http://support.apple.com/kb/ht1920
Regards,
-Norm G.

Error Message When Importing Bookmarks From A Network Share

An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
To replicate:
The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
If I copy bookmarks.html local to the kubuntu machine, it imports without error.
On windows, I can import bookmarks.html from the network share without error.
Does anyone know why I can't import across the network on the kubuntu version?
browser being run on windows 7:
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
browser being run on kubuntu 10.04:
Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
error message/window titled: remote files not accepted. The message states: You can only select local files.
So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

Error message when launching PowerPivot Window using Excel 2010

I have installed the latest version of Powerpivot on several of our workstations. Some of them are running the application just fine and some of them are getting an intermittent error message when trying to launch the PowerPivot Window.
We are running Windows 7 ENT 32bit with Office 2010 32bit
The error message given is : An operation that uses the database driver could not be completed. If the driver is a Microsoft driver, make sure the drvier file isn't damaged, and if it is, reinstall the driver by re-installing Microsoft Query.
You can then try again and it will work.
In fact the majority of the time this error message won't appear.
The application has been removed and reinstalled.
When I checked event viewer i'm finding this error which I think is related
The description for Event ID 1 from source MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error message when starting MaxDB instance

I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
"-24994,ERR_RTE: Runtime environment error
1,Cannot create ipc db directories for SID (OS error code 11000)"
Max DB version : 7.7.02
Does anyone have any specific pointers on where the issue could be.
Any help is greatly appreciated.
Regards,
Murali Narayanan

Hi gurus,
I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
MaxM

Error message when Closing PS CS6

I keep receiving a error message when closing PS CS6 which says "Adobe Media Core CS6 has stopped working"
What can I do to resolve this issue?
I'm running Windows Vista professional

If you want help you may have to provide some more information … and a Forum- or web-search might also be worth trying.
http://forums.adobe.com/message/4509053
http://forums.adobe.com/thread/1025148
http://forums.adobe.com/message/4495683

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Error Message when printing handouts

First, I know this has already been discussed in these forums. I tried the proposed solution in this thread http://forums.adobe.com/message/6273232#6273232 and it still didn't fly. I'll go ahead and bust out a full explanation of the issue for those of you who may not want to navigate to the other thread:
I'm getting the following error message when trying to publish my project as a handout:
I'm launching Cap 7 in admin mode on a windows 8 machine and trying to publish to Word 2013.
I'll select a publish location and start the publish, it gets to 10% and then stalls out (the error message doesn't appear at this time). If I hit alt+tab, I'll see a "Save as" window. I'll reselect the directory and name the file correctly and hit save. That moves the progress bar to 100% and the error message appears. I've tried to copy and paste the slides to a new project and the same thing occurs. From what I've seen, others have had this problem but I've yet to see a confirmed fix. If you've run into the issue and solved it, please let me know. Is there a word plugin I need to install? Is there a way to bamboozle my handouts from captivate to .pdf to word? That would be cumbersome but I'm not scared to try it.
Thanks in advance,
Eric

Have you tried with system PLD?
Thanks,
Gordon

Error message when recovering

Similar Messages

Maybe you are looking for