Error message when releasing a rework order

Dear Experts
I try to create a Rework production order  using co07 but I am unable becase when I click on the Release button, I get this error message " order type pp07, no checking rule maintained for operation. Release of order not possible". what steps do I take to solve thisproblem?

Dear Vincent,
1) Go to OPJK, here for ur plant & Order type do settings for Business function 1 & 2
2) or else Copy any Std Rework order in OPJK & Give ur plant & order type & save
Then check the result
Regards
Madhu Kumar

Similar Messages

  • Error message when I try to order albums off IPhoto

    Hi folks,
    The error message I get it simply "we've encountered a problem." This occurs after the album is made and I am ready to order it. I have upped my memory, upgraded to ILife and even took the computer to the local genius bar at the apple store, all to no avail. I am using an Ibook G3, and IPhoto2.0.1. What can I do?

    The error message pops up following these steps:
    1. Assembling Book,
    2. Connecting -
    at which point I get "we've encountered a problem, please try again later.
    I've tried it at different times of the day and on weekends too.
    I've checked the internet connection, and I've tried it with the internet on and the internet off. I do not run any other operations (like downloading) while I try this.
    The album is large, but within the established parameters. (I think the total is 83 pages, with a picture or two per page). I couldn't condense it much further, because the idea was to showcase the animals (it's a safari) on those beautiful full page spreads that Iphoto offers.
    Thank you for any advice you might have!
    Martie

  • Error Message when adding a Purchase Order

    Hi,
    When i enter a new Purchase Order and click on Add, it gives the message as "No Matching records found ‘G/L Accounts’ (OACT) (ODBC – 2028) [Message – 131-183]”

    Hi Manzoor,
    This is because in the purchase order there is one or more items that have no set G/L account. I suggest you allow to visualize the "G/L account" Column in the Form Settings/TableFormat in the purchase order, and then go to the G/L account and set a VALID G/L account.
    It is not very logical to put that information in an order, but however you must do that way.
    Hope it helps.

  • Purchase Order error message when on Sourcing Cockpit.

    Hi All,
    I have encountered a series of error messages when I try to convert my Shopping Cart into a Purchase Order in SRM 5 within the Sourcing Cockpit. I am using Extended Classic Scenario and have defined the number range in SRM and ECC5. The error messages are below, the moment i try to concert the cart to a Po;
    - Internal number range is missing for transaction type. Inform syst. admin    
    - Transaction type * does not exist. Check entries    
    - Some backend documents could not be generated, or they contain errors  Further Information 
    - No status object is available for 
    I have checked the transaaction type, number ranges assignments, attributes in PPOMA_BBP but fail to find the cause.
    Any pointers would be welcome!
    Thnx,
    Mike

    Hi Muthu,
    The number ranges are consistent as I have checked the number range for local purchase order and this is set as an internal between the range 3000000000 - 3999999999. On the transaction type for BUS2201 Purchase Order, 30 has been set as the Int Number Range, with all other fields left blank.
    The strange thing is that the documents that failed to convert into a PO had been reprocessed in the Application Monitor for Purchase Orders, but when I go back into Sourcing to create the PO, I now get the message:
    "You have either failed to select an item, or you cannot create a follow-on document due to an error that has occurred"
    Regards
    Mike,

  • Error message when trying to order on line

    Anyone else getting the below error message when trying to order the iPad2 online in Europe?
    An error has occurred during your session. Please return to the Store Menu to continue shopping.

    Be aware that this happened to me and when I contacted my credit card company, they said Apple had contacted them to take the money, yet no order is appearing on my account so now I'm stuck in limbo - my credit card company has approved the transaction yet I have no record or order number with which to question apple about it
    The guy at the call centre also said he had received several calls about apple over the last 30 mins so this is not an isolated incident
    S.

  • Error message when printing Sales Order

    Hi,
    I get following error message when printing out a sales order just created.
    No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
    Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
    What could be the problem?
    Thanks,
    Ajay Audich

    Have you tried with system PLD?
    Thanks,
    Gordon

  • I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

    I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars.  I downloaded it for the first time a month ago and  had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error.  What do I do now?  Can anyone help with this?

    Hello easbda,
    Thank you for providing the details of the calendar issue you are experiencing with your iPhone.  I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error message when updating Sales Orders

    Hi Experts
    Following an issue over the weekend when I was forced to perform a  hard reset we are now experiencing error message when trying to update some sales orders. 
    This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
    it is not happening on all orders - i think only ones which were on the system prior to the reset.
    We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
    Event Type:     Error
    Event Source:     B1SynchService
    Event Category:     None
    Event ID:     0
    Date:          29/06/2009
    Time:          13:42:38
    User:          N/A
    Computer:     SQL01
    Description:
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
       at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
       at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
       at NetPoint.SynchSBO.Synch.SetCompany()
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
       at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
       at NetPoint.SynchService.NPSynchService.Main(String[] args)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
    Regards
    Jon

    Dear Johnny,
    the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
    Hope my reply helps you to solve the issue.
    Regards,
    Wesley Honorato

  • Error message when doing settlement for Internal order

    Hi,
    Can someone please help me to resolve the following error:
    When trying to run settlement for an internal order, following error message is generated:
    Item 001 Order xxxxx budget exceeded
    Message no. BP603
    Diagnosis
    Budget was exceeded by xxxx amount in document item 001 Order xxxxxx.
    Also following points may be relevant:
    - System status ISBD for Internal Order is active
    - There is no PR/PO for the order, direct invoice from FI is created through tcode FB50
    - Availability control: Activation Type 1, Overall field ticked in customization
    - Tolerance  Limits:  Availability control action .... Usage 85 % - Warning message, Usage 100 % - Error message
    Thanks,
    Ankita

    Hi Loong,
    Thanks for reply.
    I have already tried drilling down the report S_ALR_87013019 , however following are the only things available from the report.
    1. There is a year independent overall budget for the order of 92500 amt.
    2. Actual in 2009 is 7870.41 and in 2010 is 77980.24. So the total actual amt is 85850.65 overall.
    3. The available budget is 6649.35. i.e Over budget minus actual utililized amounts.
    Since, in the report it shows that the budget is available then I am unable to figure out why does it give error for exceeding budget by amt 50100.65 at the time of settlement.
    Regards,
    Ankita

  • Error message when trying to place book order in iPhoto

    I have compiled a book in iPhoto, but when I go to place the order, the "compiling book" intially shows, but then I get the following error message
    *-[NSPlaceholdermutableStringInitWithString:]:nilarguement
    I have checked and every page and frame has a picture & I haven't got any pages with the palm tree background. I have got one photo with a low quality warning, but I have ok'd that error message. I have sucessfully ordered a different book a couple of days ago. The only difference is the new book has two extra pages.
    Help appreciated as I want to make use of the Europe 20% discount which runs out at the end of the week. Many thanks

    Hi,
    I am getting the exact same message when I try to order my book as well. I have text on my back cover page, I tried fixing that and numerous other things like photos and pages etc. It's something in this book because I tried other books and they were fine in assembly and I have ordered a book successfully in Iphoto 6.0 (It is driving me insane! HELP!!!!!!!) what else could it be and how do you figure this out- its such a pain that you have to go through all this troubleshooting blindly.

  • What steps do I take when i receive an error message on downloading a previous order?

    (complete girl)
    I purchased an adobe acrobat  xpro  in 2011, but I am getting an error message when I attempt to download it to my computer?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Error message when starting MaxDB instance

    I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
    "-24994,ERR_RTE: Runtime environment error
    1,Cannot create ipc db directories for SID (OS error code 11000)"
    Max DB version : 7.7.02
    Does anyone have any specific pointers on where the issue could be.
    Any help is greatly appreciated.
    Regards,
    Murali Narayanan

    Hi gurus,
    I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
    I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
    My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
    Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
    MaxM

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • Error message when opening a document "this document is being used by another user

    error message when opening a document "this document is being used by another user, do you want to make a copy?
    I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
    Any suggestions?

    Hello MrNeuf,
    I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
    Mac OS: How to release and renew a DHCP lease
    http://support.apple.com/kb/TS1920
    Cheers,
    Allen

  • Error message when run a query

    I got an error message when I run one of the query on the portal:
    Root Cause
    The initial exception that caused the request to fail was:
    Termination message sent
    INFO
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
      MSGV1: 1
      MSGV2: USITM
      MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
    What problem is this? How to fix it? Thanks in advance!

    Hi Zheng,
    Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
    Regards,
    Anil

Maybe you are looking for

  • Multiple iPads/iPhones on one Mac

    I have an iMac 24" running Snow Leopard. At present I sync my iPhone to my iTunes account on this machine. All works great no issues. In the next week or so I have two iPads coming into my household via my children! They have their own Apple IDs but

  • Why can't I drag a reminder to my schedule in iCal on my macbook pro?

    I used to be able to drag reminders into my schedule in iCal. Now when I do that it doesn't work. Is there something I'm missing here - has this capability been taken away? Sometimes I can drag a reminder over to the schedule, but it won't sync up ac

  • User-Defined Data Type (Data Transfer Objects) is null

    hi i try to access a nested complex datatype over blazeds. i always see that the second level of the  complex datatye is NULL but the other data's like String are ok. here an example: as you can see TT1 has a member TT2, and a String TT2 has a member

  • CS3 + ID CS4 - Color management Iussues in Bridge CS4

    I have CS3 WEB PREMIUM edition and recently added InDesign CS4. While trying to get the color management right for all Suite applications I get an error in Bridge CS4. "Suite Color Management is not enabled. Suite Color Management requires that a qua

  • My Macbook is old enough, where do I buy a replacement battery

    My Macbook is old enough, and the battery almost dead. I don't want to buy original battery from Apple store again. But I would like to continue to use the computer for some time. Where to buy a compatible battery? Not Ebay, California online store w