Error message when restoring my 4th generation iPod touch

I own a 4th generation iPod touch. Eventually the device it self became slow. So there fore I tried to restore it. But unfortunately, the process failed. I tried this method several times and It gives an error message every time when start the process. The device is now in recovery mode. The iTunes version I have is 10.0.1.26. The device contain the latest version of iOS 6 update.
The following is the error message:
[ "The iPod "iPod can not restored at this time because the iPod
software update server could not be contacted or is temporareily
unavailable.
Please try again later." ].

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Similar Messages

  • I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon  a lockdisk or you do not have write permission on this file. How do I resolve this problem?

    I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon  a lockdisk or you do not have write permission on this file. How do I resolve this problem?

    Repair iTunes Security Permissions
    Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
    If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
    Repeat with the media folder if it isn't stored inside the main iTunes folder.
    If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
    The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
    tt2

  • Geting Error messages when Trying to sync to ipod touch

    Just got done updating to ios 5.0 on ipod touch.  Got the new Itunes.  When it is synicing i get a message that says windows has closed Itunes. Then To the side it says Data Execution Prevention has closed Itunes.  I go in and tell it to but it on the Not to Data exection prevention list and It tells me that you cant do that that Itunes has to.  I am on windows Vista.  PLEASE HELP!!!!!!!!!!!!!

    I would try rebooting your computer. To be more confident, I would also reset the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer."  My computer is authorized

    I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong?  I'm missing about 100 songs as a result of this error!!

    See:
    iTunes Store: About authorization and deauthorization
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    Could the items be purchased by another account?

  • When synching my 4th gen ipod touch I get error msg saying ipod could not be backed up because session could not be started with the ipod. It only does synch steps 2-5. Do I have to restore it?

    When synching by 4th gen ipod touch it skips the first step - backup-, does steps 2 through 5, then I get a message the ipod could not be backed up because a session could not be started with the ipod. How do I fix this? Do I have to restore my ipod? Will all my apps be erased?

    You have to have an internet connection, either wireless or through a computer with iTunes.  When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6

  • Why is my 4th generation ipod touch not charge? I plug it into the computer and the wall and with 2 different usb cables and its not charging. When its plugged in it shows the icon for charging but the battery never increases and it dies once i disconnect

    I have a 4th generation Ipod Touch. It has been working for months when yesterday the battery started acting werid. I was driving and it was connected with the usb charger cable to my car stereo when all the sudden my music stopped and the stereo could not recognize my ipod at all. When I got back home, I tried to charge it so it wouldnt die but even while on the charger in the wall the battery continued to die. I charged it over night (the first time I have ever charged it over night) desperately to have battery for a 4 o clock plane flight so I would have entertianment. The ipod died over night while on the charger. When I unplugged it from the usb charging cable I noticed that the icon telling me the ipod needed to be charged came up. So I plugged it back in. The charging thunder bolt symbol popped up next to the very small red strip on the left side of the battery indicating that the ipod had no charge to turn its self on. I tried plugging it in on the computer, the wall ac charger and a stereo system made just for the ipod that also pluggs into the wall. I have used 2 different cables, the result being the same that the ipod held no charge, and it wouldnt charge at all while on the charger, and it would imediately die once i take it off the charger.
    I have not idea what has happened ....
    Please help
    THanks!

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • My 4th generation Ipod touch goes shows that it is charging when it is completely dead, but as soon as it stars up it ceases to charge

    My 4th generation Ipod touch shows that it is charging when it is plugged in and completely dead, but as soon as it goes past the apple screen it ceases to charge! What can i do to get it to charge?

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      
    and maybe
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.

    Sorry i mistakenly made this question. It was alright. No Problem At ALL

  • TS3694 Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.

    Error message when attempting to back up iPod to iTunes, no number given. No previous back ups as a new user, current iTunes software and iPod iOS.

    The issue you are experiencing is with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    I understand that you have already uninstalled iTunes, but when you get to this step, it is important to uninstall iTunes and the related components in the order listed in the link for that step. 

  • I am trying to reset my 4th generation ipod touch via itunes (as I cannot remember parental controls code). In itunes it does a download but then says the software was corrupted during download. Itunes is up to date. Operating system is vista. Any ideas?

    I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
    "The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
    I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
    Any advice very much appreciated.
    Thank you
    UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.

    A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to
             update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.

    I am having some trouble trying to get IOS 3.1 on my first generation Ipod touch.  I have the latest Itunes, I do not have any dvd burning software like Anydvd that can interfere, and I've tried it on two different computers with no avail.  Any help is greatly appreciated.

    msoviolist, I opened a ticket via their so called "Express Lane" support page, I assume it'll take a couple of emails before they decide to credit you for the download. I would suggest linking to these two threads in the correspondence, this is what I included in the message;
    =========
    I've attached a couple of threads from the Apple support
    forums, it appears this is an ongoing problem for many folks trying to
    download the 3.1 upgrade for the 1st gen. iPod Touch, feel free to
    check them out;
    1) Error 8288 when upgrading my first gen Ipod Touch to IOS 3.1.
    https://discussions.apple.com/thread/3373167?start=0&tstart=0#
    2) How do I upgrade first generation touch software to 3.1.3
    https://discussions.apple.com/thread/3009667?start=0&tstart=0
    ==========
    Good luck...
    Message was edited by: SpanishClash

  • I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

    I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

    I tried just about everything and finally brought my Ipod touch to the apple store.  The tech installed ios 4.3.5 but still no WIFI.  He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
    The "solution" was bizarre.  On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
    I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting.  It worked!  I must admit the fix does not work reliably, so I may still go for the exchange.  Still, I am now convinced that it is a hardware problem.    i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon.  The chilled component would work long enough to identify what needed replacement.  Perhaps something similar is happening here.
    For anyone wanting to try this, I found it more convenient to place the back of my ipod on a  frozen cold pack until the wifi is restored.  It seems to happen when condensation forms on the face.  I used a towel to wipe off the moisture so as not to add to the problem.

  • I tried to update my 4th generation Ipod touch and...

    I tried to update my 4th generation Ipod touch and it put me on the restore screen, when I click restore on Itunes it says I'm not hooked up to the internet whe I am. My ipod is stuck on the restore screen, help?

    Sounds like this
    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • New macbook pro wont connect to my 4th generation ipod touch.

    I just bought a new macbook pro and when I plugged my 4th generation ipod touch into it the ipod just flashed the battery sign off and on and made the dinging noise continuously and it never connected to my computer.  How can I get it to connect?   I've never had issues with my windows computer.  I tried different a different cord and it didn't work either. 

    I was able to figure it out

  • I got two 4th generation ipod touch for my girls.  Can I use my Apple ID on there Ipod Touch, or do they each need their own?

    I got two 4th generation ipod touch for my girls.  Can I use my Apple ID on there Ipod Touch, or do they each need their own?

    You can use the same ID. See the following in order to allow Messages and FaceTime among all users of the same ID
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

Maybe you are looking for

  • The Folder Path "My Documents contains an Invalid Character"

    Hello. I have a major problem at hand. I presently have iTunes 7.6 on my Dell laptop when i try installing itunes 7.7 or 7.7.1, it gives an error "The folder path my documents contains an invalid character" I scoured the internet, but to no avail...

  • Creating a default Cover Flow size

    Hi In Finder, one can change the default for column widths in column view, for example... so my question is: how does one change the default depth for the Cover Flow view... it seems to default to about four fifths the height of the finder window whi

  • Paper Roll up for Bill Printing

    Dear Gurus, As per my requirement i should take print outs of bills of paper size 8 inches width and 4 inches height. I have created my own page format to suit the above specifications.There is no problem with printing but the paper eject after print

  • Mail Crashing repeatedly over past week

    Several times a day for the past week Mail has suddenly quit. I have not yet been able to figure out what is causing this, so I am attaching part of the error information below in the hopes that a more knowledgeable user can help me pinpoint the caus

  • When i try to install it tells me I can't install on HD??

    I just downloaded Mountain Lion and when I clicked to install it tells me that it can't be installed on my HD?