Error message when running HD-DVD player after clean win 7 install on P205-S6347

On a P205-S6347, did clean win 7 ultimate install with toshiba instructions and loadup software downloaded from toshiba support.  On first dvd player install of latesed full player, got a video eror.  Installed latets patch, now I get "An error has occured in the audio output settings. Please check thet the sound driver is set up properly" The sound playes fine for all other programs/utilities.  Note, I am running USB powered Logitec external speakers.  I have tried to follow all the recomendations of others with this problem, yet nothng works, unless I'm not using the right software, yet I only use whats on the site for the model and OS.  The reason that I want to use this OEM player is that I havent found a comparable player that does just that, playes DVD's like a home unit, complete with menu access as a physical player would and that the moving cursers only seem to work with the Toshiba player, whereas others like VLC and Kantaris will only show one moving curser on a menue and I have to guess where the next one is to slick it to start, and Real Player isnt any better either.  Other problems I've had with other players are that the graphics seem a bit hazy sometimes, I never have that problem with the Toshiba player.  Also, others have way to many bells and whistles, I only want a player that works doing that specific job.  I wish Toshiba would package a universal player that could be installed with all that it needs to run itself.  Any Ideas folks?

Try to use the command ipconfig /renew in the cms (command dos box)
Also try this:
Control Panel > Administration Tools > Computer Management > Services & Applications > Services.
Scroll down this list to find 'WLAN Auto Config'
Double click on 'WLAN Auto Config' On the general tab, select from the start up type drop down menu, select 'Automatic'. Under Service Status click on 'Start'. Then 'Apply' these settings and exit from all open control panel windows.
Otherwise uninstall the Realtek driver in the device manager.
Then reboot the notebook.
Download the Realtek WLan driver again and install it.

Similar Messages

  • Error message when running form

    hi everybody,
    im getting this error message when running a simple form.
    Positional Parameter after key command line.
    Can anyone please help.
    thnk u

    Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

  • Receiving Error Message when running sh rep_populate.sh

    Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
    Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
    THIS PROGRAM IS DEPRECATED!
    You should be generating xml metadata instead.
    Please see http://linux.duke.edu/metadata
    After executing following instructions and replacing server name with our server name.smmj.com
    Client Setup
    1. Import the GPG key
    rpm --import /usr/share/rhn/RPM-GPG-KEY
    2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
    up2date default
    to
    #up2date default
    and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
    Enterprise Linux 5
    (commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
    (commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
    #yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
    #yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
    #yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
    #yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
    #yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
    #yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
    #yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
    #yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
    #yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
    and running additional instructions
    2. Run up2date to install python-urlgrabber.
    up2date -i python-urlgrabber
    Receiving following error
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
    is called public-yum-el5.repo
    Made following changes in that file
    Enterprise Linux 5
    [el5_latest]
    name=Enterprise Linux $releasever - $basearch - latest
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
    gpgcheck=1
    enabled=1
    [el5_addons]
    name=Enterprise Linux $releasever - $basearch - addons
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
    gpgcheck=1
    enabled=0
    [el5_oracle]
    name=Enterprise Linux $releasever - $basearch - oracle
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_base]
    name=Enterprise Linux $releasever GA - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_base]
    name=Enterprise Linux $releasever U1 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_base]
    name=Enterprise Linux $releasever U2 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_base]
    name=Enterprise Linux $releasever U3 - $basearch - base
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
    gpgcheck=1
    enabled=0
    [el5_ga_patch]
    name=Enterprise Linux $releasever GA - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u1_patch]
    name=Enterprise Linux $releasever U1 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u2_patch]
    name=Enterprise Linux $releasever U2 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
    gpgcheck=1
    enabled=0
    [el5_u3_patch]
    name=Enterprise Linux $releasever U3 - $basearch - patch
    baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
    gpgcheck=1
    enabled=0
    Then ran following commands
    up2date -u
    Output
    There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
    yum update
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
    Trying other mirror.
    Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
    We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
    Thanks, for your help

    We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
    Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
    When we go to System, Administration, Server Settings, Services, Samba is also not there.
    Nowhere can we find an easy way of installing samba on this Linux OS.
    I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
    I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
    I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
    This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

  • Error Message when running BI Publisher

    Hi-
    Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
    Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
    Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
    Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
    Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
    Any idea regarding the error message
    Regards,
    MACD

    Did your custom report ever ran successfully in the environment you are getting the error.
    Most of the time not all the report definition and associated definitions are migrated to the next environment.
    Have a look at following doc:
    E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

  • Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

    error message when running the FSPCCURR - PS/Fin MultiCurrency Process
    =====================================================
    2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
    2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
    2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

    Hi 841037,
    We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

  • I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

    Try Here  >  http://pondini.org/TM/C12.html
    More Info here  >  http://pondini.org/TM/Time_Capsule.html

  • Error message when running Transaction Code = ME84

    hi,
    i am getting an error message when running Transaction Code = ME84
    Error is 'No processing (error message P5 017), No data for chosen selection'
    can someone please guide me on this ?

    Hi Mahendra,
    There are several reasons for the release not happeneing.
    1. The issue could be in the selection of release type
    2. Scope of selection
    3. Strategy profile
    Please check whether the selection parameters are considered are right for release to happen.
    Regards,
    Harish

  • Error message when run a query

    I got an error message when I run one of the query on the portal:
    Root Cause
    The initial exception that caused the request to fail was:
    Termination message sent
    INFO
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    No connection to system BI_SAP_QUERY available
    com.sap.ip.bi.shared.SharedText system_not_found
    BI_SAP_QUERY
    ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
      MSGV1: 1
      MSGV2: USITM
      MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
    What problem is this? How to fix it? Thanks in advance!

    Hi Zheng,
    Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
    Regards,
    Anil

  • Error message when running updates

    I keep getting an error message when updating my CS programs. "This update from the internet cannot be completed. Please try again later."
    I bought a Canon 6D and the Adobe Camera Raw won't work because it isn't the latest version and that it needs the latest PS version to run the latest Raw version and I can't get either update. Help?

    Cameras by ACR version:  Camera Raw plug-in | Supported cameras
    Programs by ACR version: Camera Raw-compatible Adobe applications
    You should be able to update CS5 without getting an error which is ostensibly what this thread is about, but you are correct in needing CS6 to use ACR 7.3 which is the minimum version of ACR that supports the 6D natively.  You can use the DNG Converter to make DNGs that the older ACR will read, but that has nothing to do with images already processed in LR, because LR knows newer adjustments than your CS5's ACR 6 does.
    To go from LR to PS you'll need to use Edit In PS CS5 and when you see the message about ACR being too old, choose Render using LR Adjustments and Don't Ask Again if that is also an option.  This will cause LR to render a TIF or PSD (whatever you've chosen in the External Editing area of LR Preferences).  If you don't see a message about ACR being too old because you've selected Don't Ask Again previously then you can click the Reset Warning Dialogs button in Preferences and get a chance to answer the question differently if need be.

  • Error message when using the DVD drive

    I have a Satellite P200D and every time I put a disk of any kind into the disk drive I get an NO-DISK error message when I eject the disk. I always make sure that I shut all programs relating to use of the disk before trying to take the disk out. This is a new problem as I have used the laptop for a couple of months without any issues at all. The text of the error message is below. Any pointers would be appreciated. I can live with it but it would be nice not to have to.
    Exception Processing Message 0xc0000013 Parameters 0x764C023C 0x8E4A1B6C 0x764C023C 0x764C023C

    Ok, if you try to eject the disk using the eject button on the side of the laptop, why not try ejecting through software in windows.
    To do this right click on the dvd drive in my computer and then click on "eject". This might tell windows that its ok to let the drive go now.
    Another solution would be to save all important data to another drive, then return the laptop to "out of box condition" using the recovery disc. I'd say problem will go away.
    However, if problems persist, please see your place of purchase for a check up.
    Good luck.

  • Error message when running Business rules

    Hello,
    We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
    [Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
    Logging out user [brlpo], active for 63 minutes
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.CurrFcst does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
    Received client request: Get Substitution Variable (from user [essbaseadmin])
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
    Substitution variable AOP.Finance.Curryr does not exist
    [Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
    Error 1051083 processing request [Get Substitution Variable] - disconnecting
    Would you have an idea of reason of error code?
    Thierry

    Hi,
    Looks like the substitution variables its looking for are missing.
    Can you check that?
    Regards,
    Amol

  • Error message when running flash on firefox

    every time run firefox get an error message that flash 14.0 R crashes.  Details are:
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    FlashPlayerPlugin_14_0_0_145.exe
      Application Version:    14.0.0.145
      Application Timestamp:    53aa1aea
      Fault Module Name:    StackHash_27eb
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    590892cd
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    1033
      Additional Information 1:    27eb
      Additional Information 2:    27eb358fe674a6f15dafe56d42bb9bf3
      Additional Information 3:    2f06
      Additional Information 4:    2f06c18113e6d7c00e6b91fa1fde84b6
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    This is really frustrating as most videos require flash, help -

    Hello RJR,
    Did the crash occur in the previous version of Flash Player (14.0.0.125), or did it begin after upgrading to the latest version, 14.0.0.145?
    Please file a bug at https://bugbase.adobe.com, including the Firefox crash log file.  To obtain the Firefox crash log file, do the following:
    Launch Firefox
    Navigate to Tools > Options > Advanced > Data Choices
    In the Crash Reporter section, make sure Enable Crash Reporter check-box is selected. If not, select it and click OK
    The next time the crash occurs, type about:crashes in the address field
    A list of crashes will display
    Click on the link that corresponds with the time of the crash.  When the contents display, verify that it is for the same crash.  Include the link to the crash log file in the bug record.
    Please use the following metadata when filing the bug:
    Product: Adobe Flash Player
    Version: 14.0
    Product Area: Video
    Description: Detailed description of the error, including steps to reporudce
    Test Configuration: Operating System version, Browser version, Flash Player version
    Please attach the Firefox Crash Log file. 
    Thank you.
    Maria

  • Error message when running Flash MX 2004

    I have installed Flash MX 2004 on my PowerBook and when I open it, I get the following error message:
    "The target flash player "__First Run" is not installed. The standard Flash player will be used instead."
    Then Flash crashes.
    Any ideas?

    Hello RJR,
    Did the crash occur in the previous version of Flash Player (14.0.0.125), or did it begin after upgrading to the latest version, 14.0.0.145?
    Please file a bug at https://bugbase.adobe.com, including the Firefox crash log file.  To obtain the Firefox crash log file, do the following:
    Launch Firefox
    Navigate to Tools > Options > Advanced > Data Choices
    In the Crash Reporter section, make sure Enable Crash Reporter check-box is selected. If not, select it and click OK
    The next time the crash occurs, type about:crashes in the address field
    A list of crashes will display
    Click on the link that corresponds with the time of the crash.  When the contents display, verify that it is for the same crash.  Include the link to the crash log file in the bug record.
    Please use the following metadata when filing the bug:
    Product: Adobe Flash Player
    Version: 14.0
    Product Area: Video
    Description: Detailed description of the error, including steps to reporudce
    Test Configuration: Operating System version, Browser version, Flash Player version
    Please attach the Firefox Crash Log file. 
    Thank you.
    Maria

  • "SYSTEM_FAILURE" error message when running BEX query

    Hello,
    I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

    Hi Lee,
    Check transaction ST22 or SM21 after you get that message.
    Hope this helps.
    regards,
    Diego

  • When installing a NI 5112, I get an error message when running the test panel.

    I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
    Thanks,
    Thomas

    Hello Thomas,
       The error code you are getting is related to the board not recording enough samples in the given time interval.  May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
    Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
    LeeM
    AE,
     National Instruments
    Message Edited by LeeM on 10-31-2006 10:47 AM

Maybe you are looking for

  • How to create barcode EAN13 in smartforms?

    I want to create EAN13 in smartforms,but in smartforms the EAN13  preview incorrect . My step is : 1.SPAD, create Device types:ZSWIN (Copied from SWIN). 2.SPAD, create Output Devices ZEAN,Device type is:ZSWIN,Aeecss Method:G,Host Printer:__default 3.

  • Why is the font so huge when printing from the internet?

    Not a huge deal, but I'm using too much paper to print, for example, copies of merchandise orders that are downloaded from the internet.  For some reason, it prints this type of document with a huge font.  Regular printing that I generate myself, is

  • How to block a particular website in mozilla firefox?

    I just want to block a particular website from mozilla firefox browser. The steps given in the option are not working really. let me know in details the procedure to block a particular website.

  • Please send this bug to Apple Inc.

    theres a bug on iphone IOS 7 go to google pictures search any picture you want and click to one of them. It will be open a black page. To fix this bug you can choose "open new tab page" and you see no black page. But we need a update for IOS 7

  • How to make a fill in template for use with ipad

    If I have a custom made excel spreadsheet, that I use for fill in information, what app do i need to open, fill in and save the template for printing and sharing