Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

Similar Messages

When installing a NI 5112, I get an error message when running the test panel.

I have recently decided to reinstall my PCI 5112 high speed digitizer in a different computer, for practical reasons. After having installed the software, hardware and successfully passing the self test, an error (10800) occurs when running the test panels. The signal applied to the channel and the different parameters used, worked fine with the previous computer but not with this one. Any idea why?
Thanks,
Thomas

Hello Thomas,
The error code you are getting is related to the board not recording enough samples in the given time interval. May I ask which series of PCI card you are using. This can be found by looking at the device in Measurement and Automation Explorer and looking under devices and interfaces. The series letter is the one on the end of the number after the hyphen. E.g. PCI-MIO-16E-4 would be an E-series board.
Also which versions of Measurement and Automation Explorerand NI-Scope are you running? Are these the same versions as you used in the old PC system? Sometimes an upgrade in the version is all that is required to fix such a problem but unfortunately it can sometimes cause a problem if you upgrade! It would depend on the versions you are currently running and the series of the board that you are using.
LeeM
AE,
National Instruments
Message Edited by LeeM on 10-31-2006 10:47 AM

Error message when run the Cisco CRS Serviceability Utility on UCCX 4.5 server

Hi,
Everytime i run the Cisco CRS Serviceability Utility from the UCCX server, this message always appear "Error reading System Parameters" before the interface appear.
After that, when i click the "System Parameters" tab and there were no any information displayed.
So, i would like to know if there were any way could fix this problem.
Thanks for any suggestion.
B.rgds,
Tong

Tong,
The description that you are ginving us sounds preaty much like this bug : CSCsi25913
This is the link with the informatio:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCsi25913
HTH
Please rate this post if was helpful
Walter Solano
CCNA Voice
Cisco UCCX Specialist

I need to help with splash top / quick start. I am getting and error message when run the app.

I just receive this computer in mar 2009. I found this app out and try to install it. When I go to run it give me error message. The installation is not complete please repair the software. I also update my bios like it says. It will not run can you help me fix this issue. I like this app. I want it to work.

This page http://forum.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&thread.id=1742 provides helpful information on how to activate Splashtop on S10.
If it still can't help you, I guess you will get more help if you can provide more information like your detailed netbook version, os information, and the detailed error information.
Message Edited by DouDou2007 on 03-23-2009 12:24 AM

Error Message when run the Application

Hi
i am getting an error when i run my java application.
Error is like that-->
Cannot load tie class for com.inqmy.services.httpserver.server._HttpRuntimeInterfaceImpl_Tie.
java.lang.ClassNotFoundException: com.inqmy.services.httpserver.server._HttpRuntimeInterfaceImpl_Tie
at com.inqmy.services.iiop.server.IIOPProvider.loadObject(IIOPProvider.java:220)
at com.inqmy.services.iiop.server.IIOPProvider.getObjectReference(IIOPProvider.java:143)
at com.inqmy.core.service.context.container.cross.PortableRemoteObjectContainer.getReference(PortableRemoteObjectContainer.java:221)
at
Please tell me the reason for this error.
regards
Atul

yeah this is most probably due to the Environment which u've.
Try to reinstall the webcontainer and everything.
and Memory also caused this kind of problems most of the times.
this kind of errors encounters rarely. if your webcontainer is overloaded and the memory is low then u'll get such kind of errors.
Diablo

ERROR MESSAGE WHEN RUNNING THE REPORT

Hi Team
REP-0118: Unable to create a tempory file i am getting error when i am runnig the report ,
It is not problem in my system, i check in other system also same problem is comming
What to do?
Thanks

Hello,
CHeck the value of REPORTS_TMP.
Else, you can test with rwrun60 / rwrun and use tools like :
Windows : filemon
UNIX : truss / strace
To get more info about this error
Regards

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Error Message when running BI Publisher

Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACD

Did your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

Error message when running form

hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk u

Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

Receiving Error Message when running sh rep_populate.sh

Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your help

We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

Officejet 4500 wireless printer keep geeting error message when installing the driver

hi can anyone help im trying to install my officejet printer 4500 g510 n-z driver from the hp website and i keep getting an error message and i have no idea how to stop getting this message as i have tried a few times to install the drive and keep gettimg the same message im running windows 8.1 if tht helps
thanks john

Hello jono13,
Welcome to the HP Forums!
I understand you're receiving an error message when installing the Officejet 4500 software. What is the exact error message on your computer? Could you send a screen shot of your exact error?
How will you be connecting this printer? Wireless or USB?
Please verify this information and I will assist you further.
Looking forward to hearing from you.
I worked on behalf of HP.

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Error message when running Business rules

Hello,
We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
[Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
Logging out user [brlpo], active for 63 minutes
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.CurrFcst does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.Curryr does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
Would you have an idea of reason of error code?
Thierry

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

Similar Messages

Maybe you are looking for