Error message when scheduling a report
Hello,
We have Fabric Manager 4.2(7b)
When we generate a schedule from a created report we get the following error:
What went wrong here?
Rgds,
Ivy
re-install with version 5 solved the problem
Similar Messages
-
Error Message when Scheduling a report in Infoview
I have created a report in Crystal Report using the Universe. Report is saved to the Enterprise and set up to schedule in Infoview.
When the report is scheduled for now or any other "when" time, I receive the error message:
"Error in File C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\tfcu-fics.reportjobserver\~tmp58860bbee30730.rpt: Unable to connect: incorrect log on parameters."
Currently running CR Version - 11.5.0313
BOE Version - 11.5
On my workstation - the ODBC connection, System DSN, for crystal is using the Adaptive Server Anywhere 9.00 driver - have no issues creating the report from the Universe.
On the server the ODBC connection, System DSN, for crystal is using the SQL Anywhere 10 driver. Would using the SQL Anywhere 10 driver create the error message above?
To test this I changed the workstation System DSN connection for crystal to SQL Anywhere 10 and when trying to refresh a report created from the Universe I kept receiving the ODBC Login window asking for the database password.
Is there an issue with SQL Anywhere 10 and a Universe not holding the database username or password?Try This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know. -
R/3 to BW (error message when scheduling load)
Hi
I am new to BW and R/3. I have been getting this messsage when scheduling the load (transaction data) from R/3 to BW ODS.
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during
IDoc update:
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here
using the BW Monitor.
Removing errors:
How you remove the errors depends on the error
message you receive.
Please advise what,how to solve this issue.
thanksHi Carlos,
welcome to SDN.
Run RSA1 - Source system - right click on the source system concerned - check connection.
If the source system is inactive, you need to activate or even restore.
For more details, please check:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
Lilly -
Error message when displaying a report in a windows form
Hi,
use Cr 2008.SP3 Fixpack 3.5,
Visual Studio 2008 prof. editon version 9.0.30729.1 SP,
:NET Framework 3.5 sp1
vb.net 2008
when displaying a report in a Windows form sometimes the following error message appears
System.NullReferenceException: Object reference not set to an instance of an object
bei CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
bei System.Windows.Forms.Control.WmMouseMove(Message& m)
bei System.Windows.Forms.Control.WndProc(Message& m)
bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
bei System.Windows.Forms.ContainerControl.WndProc(Message& m)
bei System.Windows.Forms.UserControl.WndProc(Message& m)
bei CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
bei System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
bei System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
The rest of the error message is in german:
************** JIT-Debuggen **************
Um das JIT-Debuggen (Just-In-Time) zu aktivieren, muss in der
Konfigurationsdatei der Anwendung oder des Computers
(machine.config) der jitDebugging-Wert im Abschnitt system.windows.forms festgelegt werden.
Die Anwendung muss mit aktiviertem Debuggen kompiliert werden.
Zum Beispiel:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
Wenn das JIT-Debuggen aktiviert ist, werden alle nicht behandelten
Ausnahmen an den JIT-Debugger gesendet, der auf dem
Computer registriert ist, und nicht in diesem Dialogfeld behandelt.
Thank you
OttoCan you define "sometimes" a bit more?
Is it after a number of runs of a report?
Is it on a particular report?
Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
Can you duplicate the issue if you isolate the report to a new test app?
Did you happen to notice if the issue existed prior to FP 3.5?
Is this on your dev computer or a client computer?
OS?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Deadlocked error message when running crystal report
Hi All,
I need a bit of guidance as to the following problem.
Seems there is a lock being created in SQL when running some crystal reports.
When trying to run a report the following message is displayed:
Database connection Error L 'ADO Error Code: 0x
Source: Microsoft SQL Native Client
Description: Transaction (Process ID 302) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
SQL State: 40001
Native Error: [Database Vendor Code: 1205 ]'
The error is happening intermittently when refreshing the report. It does not seem to happen when no users are using the system.
Is there any way to stop this from happening? Or is this some kind of limitation with crystal and how it accesses the database?
Many Thanks,
MattHi Matt
I have had this problem with long running queries as well. I ended up doing the main part of the query in a view using WITH (NOLOCK) for each table and then reporting on the view.
This had extra benefits of making the report much simpler and often making the query more efficient and easier to test as well.
Rob -
Unknown Error Message when creating Visual Reports
I get the Unknown error message periodically when trying to create an excel cash flow report. I am running Excel 2010, and Project 2010.
Very frustratingHi Jim,
Are you able to view other reports without any issues.
Is the happening only on this project?
Also, Please let me know the project professional patch.
Thanks,
Phani -
Error message when executing a report through a VB application
Hello,
I have a problem when I want to launch a Crystal Report 10 report in a Visual Basic application.
I created a report using "Add a command" to add a SQL query to this report, the report is working well when I launch it in Crystal Report. But when I launch it in the application I get an error message "The table 'Command' could not be found".
(Other reports are working in VB when I create a report whitout the sql command tool)
How can I do to make this working through VB ?
This application uses a sql server 2005 database.
Thank's in advance for your help,
RégisThank's for your answer, yes I'm connecting through an ODBC connection, yes the VB app is running the same odbc entry.
When I have only a "normal" link to a table the report is working well, the problem is that when I add a sql command in this report, the VB application thinks it's a "normal" sql table and it gives me the error message. The VB application didn't recognize that the table command in the report is a sql request. I don't know what's the difference between executing this report directly in CR or in the VB application, the report didn't react in the same way even if the ODBC entry is the same.
I don't know if what I try to do is possible, is it possible to execute a CR report with a sql command in a VB application ?
FI : I found yesterday the way to create the same report without a sql command, its working in the VB app. But it would be great if I could solve this problem because it's much more easier to create a report giving only the sql request and not to do that manually in the report (attaching all the tables, making the group by, sort...). -
Error message when previewing RTF report
Using BI Publisher (10.1.3.3.0 Build 108) Building a simple template using the following XML file - shown is just a snippet of the total XML file.
<employee>
<employee_id>103</employee_id>
<first_name>Alexander</first_name>
<last_name>Hunold</last_name>
<salary>9000</salary>
</employee>
Have built the following template in WORD 2003
<?for-each:Employee?>
first_name
salary
<?end for-each?>
When preview in rtf only thing I am getting is an error window that pops up and simply displays the word Error with NO error message whatsoever!
Please let me know what is going on and how to use this 'tool'
Thanks - CaseyGentlemen - the problem has been found and resolved. Seems like the XML Data Source cannot contain a reference to a validating DTD. Once the following reference was removed AND I used employee instead of Employee in the template all worked.
<!DOCTYPE employees SYSTEM "employees.dtd">
I assume this is correct - not being able to contain a DTD reference? I will also, tomorrow (read that as probably Monday) be trying the same thing using XML Schema vaildation.
THANKS for the help - Casey -
Unusual error message when running any report on R12 (fresh installation)
Hi,
I managed to install R12 on W2k3 finally and got several problems since. Now I am getting below message in log file, every time I run any report. It seems it works for other other concurrent programs (tried Workflow Definitions Loader). Below log is for the report run in AP module, but I also tried others and they do not work.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXBABAL module: Bank Account Listing
Current system time is 23-JUL-2011 19:57:52
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORDER_BY_PAR='Bank,Branch,Account Name'
P_BANK_ACCOUNT_PAR='Both'
P_EFFECTIVE_DATE='2011/07/23 00:00:00'
P_SET_OF_BOOKS_ID='125'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8MSWIN1252
LOG :
Report: j:\oracle\VIS\apps\apps_st\appl\ap\12.0.0\reports\US\APXBABAL.rdf
Logged onto server:
Username:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5812766.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 23-JUL-2011 19:57:55
Any idea what is wrong? Any additional steps after installing? Some service need to run?
Regards
PiotrAny idea what is wrong? Any additional steps after installing? Some service need to run?Can you reproduce the issue with "Active Users" or "Active Responsibilities" concurrent programs?
Have you defined a dummy printer at the OS level? If not, please do so and check then (bounce the CM before submitting the request again).
Thanks,
Hussein -
ERROR MESSAGE WHEN RUNNING THE REPORT
Hi Team
REP-0118: Unable to create a tempory file i am getting error when i am runnig the report ,
It is not problem in my system, i check in other system also same problem is comming
What to do?
ThanksHello,
CHeck the value of REPORTS_TMP.
Else, you can test with rwrun60 / rwrun and use tools like :
Windows : filemon
UNIX : truss / strace
To get more info about this error
Regards -
Error message when checking WWI report template document in CG42.
Hi Gurus.
I'm facing troubles to check MSDS report template document after upgrading the version 4.7 to ECC 6.0. When I try to Check the template I receive many msgs warnings like shown below:
For Example One type of template warninfg from report document:
Template Texts: (From the UNDERLINED LINE i am getting the warnings)
<01G1023001RP(C;1)>:<01G1023001RP(P;1)>:
<13BNG034(+0101G1023001RP(C;2-),01G1023001RP(P;2-)>
<11BRG023(D;2-*)>
<01G1023001RP(C;2-)>:<01G1023001RP(P;2-)>:
<11ERG023>
WARNINGS from above template symbols:
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
*Similar type of other warnings:*
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM1: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM2: Range to be overwritten by that of discrete repeating group
Symbol ZSUPSTR: Range to be overwritten by that of discrete repeating group
Symbol ZSUPCTY: Range to be overwritten by that of discrete repeating group
I realy don't know what is going on. Before in SAP 4.7 version When i check the template document i didnt receive any warnings like i listed above but i am receiving now. For your reference I am using the same WWI report template in ECC 6.0 also.
Can anyone help me?
Thanks in advance.
Edited by: sunil29 on Aug 1, 2011 3:26 PMSee note 920317. That warning won't affect the result based on this example. You are using (2-*) on both the Discrete repeating group and the symbol itself. In your new system, the area you use discrete repeating group overrides the area on the symbol. The note gives some examples.
-
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
Error message when trying to view/print Crystal reports in B1
I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal -
in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciatedHi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
CUSTINVOICETRANS.INVOICEDATE
FROM SALESTABLE INNER JOIN
CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2) -
Error message when saving an modified XL Reporter in Microsoft Excel
Dear all
I have encountered an error message when I tried to save an modified XL report in Excel.
The error message is:
An error occurred while trying to save the report definition! Object variable or with Block variable not set.
The user now is using 200B PL 42 with Microsoft Excel 2003.
Thanks in advance for advices.
Thank you.
Regards,
Catea kHi Catea k ,
for thies error Object variable or with Block variable not set
Please evaluate if OSS notes ##559043, 571831 and 575434 are applicable to your situation
also check SAP Note 1227475 - Object variable or With block variable not set (processing)
Note 1132338 - Object variable or with block variable not set
Note 1180272 - Object variable or with block variable not set
Note 1100521 - Object variable or With block variable not set[Create Temp T
refer this thread also
Object variable not set - Run-time error 91
Regards
Abhishek
Maybe you are looking for
-
How to call a window dynamically from a view
Dear forum experts, I am developing an application where i have 4 view controllers and 2 window controllers under one component.Some times on click of a button i have to give a provision to switch to another view from one view, which i did by firing
-
Hp Officejet 5700 printer problem
Everything I print comes out small like 4x6 size on the printer. I have an HP Officejet 5700. It worked fined for last several months. Yesterday the problem started. So I went to HP website and download driver again, reinstalled and rebooted. Same th
-
The video clips appear to be rendering in high quality while in the import bar, but once i drag the clips into the timeline, the quality drops significantly. I have already exported the project, but the final product still shows that the quality is h
-
How to send a message from server to a particular client
Hi all, I need to send a message from one host to another host which are connected in local domain. Now I'm able to send a message from client to server and vice versa but what I need is the server should route that message which I send through one c
-
WRT610N V2 wired as 2ndary router to wired router, does not give IP address wirelessly
My WRT610N V2 is wired as 2ndary router to a wired router but it does not give IP address wirelessly to connected PCs. It is getting DHCP IP address in the 192.168.1.xxx range from the 1st router, on its internet port, and issuing properly an IP addr