Error message when starting - Set Config. App.

New member here! I have searched an looked at these forums for some time but only now joined. Should have done it before.
Operating system is MS XP Pro,
Printer involved is HP LaserJet 1150
Computer is a Fujitsu LIfebook that is used in several field offices and at home.
On start or re-start, the final action is a screen message stating "Set Config. App. has encountered an error and needs to close". This is a Microsoft message and has the option to send/don't send an error message.
Sending the error message then clicking the more information button brings up a screen stating the error is in a printer driver with links to HP support.
This is an irritant rather than a problem because selecting "don't send" closes the screen and if I do nothing all programs work ok and the little message screen stays on bottom. The printer works fine.
With some time on hand, and not knowing which HP printer was causing the message, I uninstalled all printers and begin a re-install. I have the disk for the LaserJet 1150 which has an earlier driver. I downloaded the latest (2004) dirver and there was the error message still.
The only related thing I can think of is that HP Image Zone Express cannot be un-installed in any way. Using Control Panel - Add/Remove or using an un-installer program given to me by HP Chat Rep "Ariel". It never un-installed so when I re-installed the 1150, the old IZE was there to be over written.
I hope this is not to long, just trying to make it clear.
I will appriecate any help, as mentioned it is an irritant rather than an operational block.
HP PhotoSmart C6280 All-in-One.
HP LaserJet 1150.
HP DeskJet 5900.
HP PhotoSmart A-526.
HP PhotoSmart 7550.
Canon I-80.
Windows XP Pro.

If you tell the error screen to go ahead and send it then it will give a message to allow you to view the information that will be sent.  Open this file and see which program of .dll file is causing the error, this may help to determine which driver is at fault.
Actaully sending the error report will also help MIcrosoft identify the problem and feed that information back to the company responsible for the issue.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • N97 system error message when starting Maps

    Hi all,
    I do get a system error message when starting the maps app.
    I know that this is not a new topic but I did not find after intensive search a solution.
    - Firmware is updated
    - soft reset done
    - it seems that the app is not installed
    - have deleted the cities folder and the qf file
    Unfortunately no change - maps app does not start.
    Not sure that this is important but I want to mention this for the sake of completeness:
    - the maps did work once
    - when I started them the next day and I was at a different location it still showed the location of the previous evening abnd did not recognize where the phone was
    - after some time I could not start the the maps app.
    Any help greatly appreciated!
    Best

    Ahhhhhh I want to scream. This phone is driving me crazy...so many problems.. latest among others is, opening maps it gives me the error like you all mentioned above.. so how and where do I go to download what you mentioned... and I did try to go into"download" and my phone just says I don't have enough memory to download anything.. HELP

  • TS3219 Is anyone receiving a "unknown error" message when updating/getting new apps?

    Before and after installing the new update I started receiving an "unknown error" message when trying to update apps. I changed my password thinking that was it but I am still getting the error message.

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Error message when starting MaxDB instance

    I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
    "-24994,ERR_RTE: Runtime environment error
    1,Cannot create ipc db directories for SID (OS error code 11000)"
    Max DB version : 7.7.02
    Does anyone have any specific pointers on where the issue could be.
    Any help is greatly appreciated.
    Regards,
    Murali Narayanan

    Hi gurus,
    I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
    I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
    My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
    Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
    MaxM

  • I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

    I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

    http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

  • Error message when starting Firefox 8 that says: TypeError: Components.classes[TvtPwmComponent_CID] is undefined

    error message when starting Firefox 8 that says:
    TypeError: Components.classes[TvtPwmComponent_CID] is undefined
    I am using Window 7 64 bit

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Getting error message when starting Photoshop CS3

    I am getting the following error message when starting CS3:
    "This application has failed to start because CML4.dll was not found."
    The window title is, "Photoshop.exe - Unable to Locate Component"
    Of course, the only button to push is the "OK" button (which should probably read - Something's f-d up. Press here to continue.) After pressing the OK button, CS3 starts and works without issue - so far.  I guess I haven't actually used the part of the program that uses CML4.dll or just don't see any difference with or without it.
    How can I resolve this issue - without reinstalling PSCS3? and why does it happen in the first place?

    Nikon Scanning Software has CML4.dll as part of its package.  I assume that the Nikon software did not install/uninstall properly and is causing the error.  I have not gone back to do Nikon scans within Photoshop so I do not know if it affects performance. McAfee does not flag it as a virus, and other websites I referred to indicated no viral activity associated with the file.

  • Error message when starting firefox

    since I've installed the latest update (firefox 4.0.1) I get the following error message when starting firefox:
    '''Type Error: Components.classes [TvPwm Component_CID] is undefined'''
    I must then click on OK to get firefox to open => very annoying!
    I'm using a ThinkPad laptop and the passwordvault which was perfectly available in the older version of firefox don't open in tools any longer, when forced via lenovo thinkpad tool, it daoesn't launch the asked for site either.
    Thanks for helping me.
    Claudia

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

    I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

    apple_master New Delhi, India
    This solved my questionRe: Unable to Purchase 
    Apr 16, 2012 10:22 PM (in response to eight4seven)
    This worked for someone
    I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
    About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
    Everything has worked well since with no more error messages.
    I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
    Deleting downloads.28.sqlitedb and the contents of Downloads worked for me.

  • On My Mac Pro Getting an unknown error message when trying to update apps

    On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I get an error message when trying to download apps from the app store.  "safari can not open the page because the address is invalid".  Please help!!

    i get an error message when trying to download apps from the app store.  "Safari can not oprn the page because the address is invalid"

    You can't use Safari to download iPad apps. Only use iTunes/App Store.
     Cheers, Tom

  • Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"

    Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"
    The error message reads: We could not complete your request, please contact Itunes support to complete this option.

    You are almost there:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Error message when starting OC4J in JDeveloper 10.1.3.1

    Hello,
    I am new to Java Server Pages and OC4J. When I try to run a simple JSP page in JDeveloper 10.1.3.1, I get the following error message (edited):
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    ...\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
    [waiting for the server to complete its initialization...]
    Error parsing internal-settings.xml: server-extension-provider class 'oracle.j2ee.ws.server.mgmt.runtime.InterceptorContainerExtension' not found
    oracle.classloader.util.AnnotatedClassNotFoundException:
         Missing class: oracle.j2ee.ws.server.codegen.ServerArtifactGenerator
         Depending class: com.evermind.server.ejb.compilation.Compilation
         Loader: oc4j:10.1.3
         Code-Source: ./j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar
    Diese Load wurde um system.root:0.0.0 mit der Methode Class.forName() eingeleitet.
    Die fehlende Klasse ist in keiner Code-Source oder keinem Loader in dem System verfügbar.
    at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2068) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1679) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1635) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1620) [./j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]
         at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_06]
         at java.lang.Class.forName0 (Native method) [unknown, by unknown]
         at java.lang.Class.forName (Class.java:242) [jre bootstrap, by jre.bootstrap:1.5.0_06]
         at com.evermind.server.ejb.compilation.Compilation.generateWebServiceRefs (Compilation.java:1541) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ejb.compilation.Compilation.compile (Compilation.java:189) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ejb.compilation.Compilation.doGenerateCode (Compilation.java:264) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ejb.EJBContainer.postInit (EJBContainer.java:898) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationStateRunning.initializeApplication (ApplicationStateRunning.java:217) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.Application.setConfig (Application.java:413) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.Application.setConfig (Application.java:314) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.initializeSystemApplication (ApplicationServer.java:1557) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.initializeAutoDeployedApplications (ApplicationServer.java:1544) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:974) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:131) [./j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in .\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap:1.5.0_06]
    Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
    Any idea, what's wrong with my configuration?
    Thanks,
    Wolfgang

    Tested JSP page in JDeveloper 10.1.3.1; JSP page does not generate an error.
    Reinstall JDeveloper.

  • HT4943 Error during download - I keep getting this error message when installing or updating apps

    I subscribed to wired magazine and I am trying to download the first mag, however I keep getting an error message stating "error during download, try again later". I also get an error message when trying to resume paused updating of apps. I've tried turning ipad2 off and then on again but this doesn't  work. Can anyone help?

    There are all basic troubleshooting steps that have worked for other users in the past that were having problems downloading and updating apps. YMMV .....
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Maybe you are looking for