Error message when syncing; "required disc not found" ???

when i try syncing i get the message that the required disc was not found,, what disc!? it never acted like this before. any helpp is greatly appreciated

it means a USB adapter. one that is connected to your computer in order to give you more USB ports than are built into your machine.

Similar Messages

Need Help ASAP! TV Show won't sync, required disc not found

I need some help!!! I am trying to sync a TV SHow to my iPod and I can't get it to work. For some reason in iTunes, I have to completely unplug and plug in my iPod anytime I want it to sync, pressing the sync button does not work, neither does pressing the apply button after checking the TV show that I want to sync. SInce I don't have to update any settings for music, this isn't a problem, I just unplug my iPod and plug it back in and it syncs automatically. The error message I get when trying to sync Shows, or videos or anything where you have to update is Can't sync iPod required disc not found. If someone could respond to this right away, I would appreciate it as we are going to be traveling today, and I would love to have something to watch during my four hour flight!

Welcome to Apple Discussions!
See if the steps listed here help...
http://support.apple.com/kb/TS1539
btabz

HT1386 Received this error message when syncing iPad: Could not sync apps to iPad because apps installed on the iPad could not be determined. I have no idea what apps it could refer to. It's my daughter's iPad.

Error when syncing my daughters iPad: "Could not sync apps to iPad because apps installed on iPad could not be determined."
I have no clue where to go from here. Any ideas?

https://discussions.apple.com/message/17259204#17259204
https://discussions.apple.com/message/16469359#16469359

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice. What now?

When I try to run iTunes I receive the following error message: "Apple Application Support was not found. Apple Application Support is required to run iTunes helper. Please unistall iTunes, then install iTunes again". I have done this twice and continue to get the error message. What now?

Hi texasslagle,
It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
There is an article that you may want to use to try to complete your install here -
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for using Apple Support Communities.
Best,
Brett L

HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I get errors trying to set my IPAD back to the factory setting. error: backup session failed. If I try to sync I get 3 more errors - 1) the IPAD cannot be synced, an internal error occurred. 2) required file not found. 3) folder specified instead of fi

Any help with errors setting IPAD back to factory setting? I received this error when trying to back up - backup session failed. Has any one had the following errors when trying to sync to computer?
1) the IPAD cannot be synced, an internal error occurred. 2) required file not found. 3) a folder specified instead of file.
Any help appreciated

Type "13019" into the search bar at the top of this page by "Support" and read the resulting help articles.

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

Any answers how to fix it? All Im getting is error for the past 3 days!

Have a new itouch. I'm having trouble downloading iTunes. I keep getting the error message: Apple Application software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTues again. Error 2.

I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
Lg

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

When trying to access itunes, i get an error message that MSVCR90.dll was not found and to reinstall the program.

when trying to access itunes, i get an error message that MSVCR90.dll was not found and to reinstall the program If I uninstall and reinstall itunes, will I lose my library

See Troubleshooting issues with iTunes for Windows updates.
Your library should be fine, but you ought to back it up regularly.
tt2

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

IPod Classic 120GB cannot sync, "Required disk not found"

Somebody, please help! iPod Classic 120GB charcoal, current OS as of about a week ago (won't stay synced long enough for me to see what it is), iMac 24" 10.6.4, iTunes 10.0.1. Let me know if you need any more info and I'll try to provide it.
Everything was absolutely fine until I updated to the newest version of iTunes. Now, when I plug in my iPod, it says it's connecting then jumps straight to the "Okay to disconnect" screen. It never shows up in iTunes at all. After doing this repeatedly, I unplugged it then immediately plugged it in again before it had finished the progress bar on the "Okay to disconnect" screen, and it finally showed up in iTunes, but it gave me an error of "iPod was not properly disconnected" then "cannot sync - required disk not found" and disconnected itself again.
I tried resetting it (menu+center buttons) while it was plugged in, and this did nothing. iTunes still didn't recognize it at all.
About a week ago, I followed some instructions somewhere and toggled the "enable disk use" option (I usually keep it unchecked) then was able to restore it. The songs were added back in a bizarre order (not alphabetical, not chronological, songs within an album added out of order, jumping from artist to artist, etc.) and I had to sync it again for three random albums that it missed the first time, but once everything was in again it was fine. I haven't added any new songs or playlists to my iTunes library since then (just changed a few ratings and I like to keep track of play counts), but when I tried to sync it again this morning, I got exactly the same errors.
The only difference this time is that it alerted me that one song in my library (a song I happen to like very much) could not be synced. The song still shows up on my iPod, but will not play. It still appears and plays in iTunes on the computer.
The iPod works perfectly in day-to-day use and is a little over a year old. I take very good care of it (my previous iPod is four or five years old and still works fine) and it has never had any problems before this. It has almost 100GB worth of music (no other media, just music), which makes it pretty annoying to have to restore it more than absolutely necessary. What is going on here and is there some way to fix it that will last longer than a week?

Hi, yeah I'm experiencing the same issue as everyone else with a 120gb iPod classic using iTunes 10.1.1 (4). Started about the time of OSX 10.6.5 update and hasn't been resolved with the OSX 10.6.6 update.
iPod attempts to Sync but now quits without even appearing on the computer let alone iTunes.
I have ESET security but quitting the app doesn't help.
I also have an iPhone 3Gs and that's still syncing fine (thank heavens), via a different library.
I've since managed to wipe the iPod clean (back to factory settings) as forced to do so by following the instructions in another post to remove the iPod Photo Cache. I then moved my iTunes folder to another directory for safe keeping.
I set up a clean iTunes database thinking my old one might have been corrupted. To do this you open iTunes from scratch while holding down the option key and select "Create Library". iTunes then remembers the last library created whenever you open the app.
When I am able to see the iPod summary screen (a rare occurrence now) I see that "enable disk use" is checked ok - this has been noted as a problem in previous forums. So that's not the issue.
Actually the iPod doesn't even stay connected to my 2010 unibody MacBook Pro when the iPod is switched over to disc mode. It immediately goes into "OK to Disconnect".
So I now have a clean iPod, and clean iTunes - all empty and essentially useless!
Anybody out there with any ideas? Plllleeeeeeeese?

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

ITunes displays -48 error message when syncing iPod Nano on Windows XP

My girlfriend's mom's iPod Nano ran out of charge while jogging so she decided to charge it on her daughter's iHome. The next day she went to use her iPod but it was totally empty of all music and files. When she tried to sync it to iTunes, she received an eror message stating, "An unknown error has occurred (-48)" from iTunes and a Windows message stating that some iPod folder/file was corrupted.
If anyone receives such a message, I was able to correct it by:
-Plugging in your iPod to your PC
-Ignore the error messages
-Go to My Computer
-Find your iPod's drive letter (ie. G:)
-Right-click on it and select Properties
-Go to Tools Tab >Error-checking and select Check Now
You should be able to sync your iPod as before. I do not claim to be an expert so be warned that it may not work for you. Good luck!

Hey ermides,
Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
http://support.apple.com/en-us/ts1539
Thanks,
Matt M.

Cannot Sync, Required file not found!

Plz help. I just updated itunes and now when i plug in my ipod, it wont sync,it says, "The ipod "name withheld's ipod" cannot sync. required file not found."

It's possible that the iPod Photo Cache folder on your computer, which is created from syncing photos to your iPod, is interfering with the syncing.
Try deleting the folder from your computer. See this for details:
Photo Sync creates iPod photo Cache
Then, try resyncing your iPod with your computer, and see if it is sucessful or not.
-Kylene

Error message when syncing; "required disc not found" ???

Similar Messages

Maybe you are looking for