Error message when trying to access itunes radio

Hello,
when I try to access itunes 7.1.1(5) Radio stations I get an error message that read as follow:"an error occured wlile contacting the radio tuning service. Check your internet conn., or try again later" My inter. conn. is fine and I have tried later many times.
Can someone could give me insight on what the problem might be?
tks
jb

Check your firewall settings, it may be blocking the required port.

Similar Messages

  • Getting Error Message When Trying to Access iTunes Music

    Hi!
    Need some help.
    Little Mac Mini has been through a lot after foobaring after the last update. To bring you up to speed, I had to get Apple Genius Bar to fix the problem but they re-installed the OS by installing 10.4.7, Safari 2.0.4 and iTunes 7.0.x even though it had had 10.4.11, Safari 3.0.4 and iTunes 7.5 on it before the problem. Even when it was offline with Safari and mail crashing, iTunes worked fine. After Apple's re-installing 10.4.7, iTunes had problems and gave me a message that it could not play the video files because the quicktime version was too old. So Quicktime too was re-installed using an older version. Why did Apple Genius Bar fellow do this?
    Anyway... after this I found an underlying problem with the directory and had to restart with Tiger install disc and run Repair Disk to fix it. Then I got the computer back up to 10.4.11, Safari 3.0.4 and iTunes 7.5 using Apple's combo update and Software update. Repaired permissions and verified disk, everything.
    So here is the problem, I can not get iTunes to access my music on the external hard drive anymore. I remember getting a message that suggested that something happened to the xml file.
    Here's the thing: I have two complete copies of the iTunes music on two external hard drives. I also have, in addition to these, a complete copy of the iTunes Music backed up using the Apple program "Back-Up." Usually, I keep iTunes pointing to the music folder on one of the external hard drives, but now, it insists on opening up the iTunes music on the internal which has very little music on it. I know how to open the other music libraries by holding down the option key and starting iTunes and choosing a library. In the past when I did this I got iTunes up with all of my music, etc. fine. I used to be able to access the music library on one external and then switch to the other library by holding the down the option key while starting iTunes. But now, I get a message that says "An iTunes Library file could not be found in the folder 'iTunes Music.' Please change to another" irregardless of which library I choose. What does this message mean? How do I get iTunes to access the music in these libraries again?
    I know that the music libraries are all fine on the externals, because I have gone and found them. All is okay with that, but I can't get iTunes to see them. Could this be because the xml file is missing? I can't seem to find it anywhere. Not in the main hard drive or on any of the externals. If it is missing and I need it, where can I get it and where, exactly do I put it. I am a bit sketchy on my understanding of the file hierarchy as you can tell.
    I do have back-up. Would a restore fix the problem. My little mac only has about 6 gigs left in it's internal so there is not enough room to put the music back into the internal iTunes that it is currently working from. Can I restore the back up version on to one of the externals? I don't know really what to do.
    What am I missing? Thank you so much!- Charlotte

    Well... no response.?
    Anyway.... solved my own problem. Apple should hire me.
    Actually read another post and got an idea. Held down the option key while starting iTunes. Got the window that asks if I want to create a new library or to choose a library. I had been choosing and finding that my libraries on the two external hard drives were damaged. Yes... I think it was because the iTunes Library files and the iTunes Library xml files were missing. So instead of choosing library, I chose to create a new library. Of course it brought up iTunes with nothing in it. I opened the folder "iTunes" on that same external hard drive and boldly clicked and dragged it on to the empty Music section of iTunes. It imported! First importing everything. Music, podcasts, video, audio books, etc. and then imported album art and then boom, it was all there. With trepidation, I closed iTunes and reopened it and yes, all is there still... like in.... it works! It plays! I've been listening to music while typing this.
    Of course, the playlists and play counts, ratings are gone. Yes... I expected that, but I have all of the media and that is what is important. Even the things I downloaded just before the problem happened is in there. Okay... well that's good.
    Hey.... what ever you do, keep back ups and copies, like several and in several formats and all over the place. For instance, most of my music is backed-up in five places. On a cd, also on a dvd, and also in three places on two different external hard drives!
    Okay.. for the weird thing and it's only weird to me because I obviously do not completely understand the file system in the mac. It's this: Before I created this new library, when I went to the external hard drive I found the folder labeled "iTunes" and no other folders. The iTunes folder only contained the media content and I could not find the library or library xml files. Now after importing that one iTunes folder into the newly created library and allowing it to get everything into it, going to the external hard drive I had expected to see a new folder with a new copy of all of the music content in it but instead I found a new folder labeled " iTunes1" and opening it, I found the library and library xml files. Ah.... so if I am understanding this correctly, what "creating a new library" did was to add in new the library and library xml files that were missing, but it still accessed the "iTunes" folder with all of the content that was already there. So... in essence fixing the problem. Yes... this would be correct because the external has the same amount of gigs used as it had before I created the new library. This is way cool! And no, I did not mess anything up, my computer's internal hasn't enough space for the iTunes music content and it's showing the same amount of space used so it's not like it moved the stuff into the internal. It couldn't do that, anyway.
    I shall thank the guys on the other post for their help. Hope this helps others.
    By the way... this whole problem happened originally because apparently my hard disk had errors in the directory and the downloading of the last security update (security update 2007-009) was just too much for it.
    Look before updating always check by going to Utilities and performing a "permissions repair" and also running "Verify disk," even if you see that your S.M.A.R.T. disk shows "verified." If verify disk shows any errors or problems then perform a disk repair. Do this before any update or installation or you may run into serious trouble. To do this get out your OS install disk. Use the Tiger one if your computer is currently running Tiger. Leopard one if it's using Leopard. Put the disk in and re-start your computer. As soon as it is off and before it even begins to start up, hold down the C key on the keyboard and keep holding it down until you get the message asking what language you want. Don't panic, this is correct. It will look like it wants to install the OS again. Don't re-install the OS. But you can choose the language. Here I was panicking and I don't want you to. At the top you will see the installer bar. Go to Disk Utility up on that bar and click on that, it will take you to Disk Utility and you will then and only then be able to perform a disk repair by clicking on "Repair Disk." Do it! Do it a couple of times until the thing reports that the disk has no problems. I forgot how it states this but I do remember that the lettering is in green. Green is great! Close Disk Utility. Quit Installer. A window will come up asking you to choose where to restart from so choose your internal hard drive and it should restart and be good to go.
    Trust me, the updates are fine. 10.4.11, Safari 3.0.4 and iTunes 7.5 are good, it's existing problems in your computer's directory or keychains that is causing the problems when updating or installing new stuff. I had to learn all of this the hard way, even though I tried to keep my mac clean and in top shape, and even though I asked and asked the Genius Bar guys at the local Apple store if there is anything more I needed to know to prevent difficulties. I learned all this here, in these discussions, in answer to my posts under other sections. Thanks Klaus1, Hawaiian_Starman, dechamp, and baltwo!
    Okay.. if I got anything wrong in my descriptions, please, please correct me! I don't want to be inaccurate. I want to know this stuff!
    Thank you so much for persevering through my long post, here. -Charlotte

  • Getting error message when attempting to access iTunes store. UNknow error occurred (0x800903318). make sure your netwrok connection is active.

    In iTunes software get error message when attempting to access iTunes Store. Could not connect. Unknown error occurred (0xx800903318). Make sure your network connection is active and try again...NG

    Hello there,
    Thanks for using Apple Support Communities.
    Since this error 0x800903318 combined with the network connection error message is occuring when you're trying to connect to the iTunes Store, I'd like you to please follow the steps in the article linked to below.
    Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
    Cheers,
    Alex H.

  • Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

    Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
    Have repaired , reinstalled , created and used a restore point etc etc
    How do I fix this !!! Please

    ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • I am getting this error message when trying to download itunes on windows 7 32 bit:  microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd

    I am getting this error message when trying to download itunes on windows 7 32 bit:  microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
    Can someone please Help?

    I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
    I also found this in another post
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

    What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

    You mean when you try to just start it?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • User gets an Content Encoding Error message when trying to access workspace

    Hi.
    I've created a workspace and added several users to it who can access it without any issues.
    However, one specific user (Leslie Elstad - https://beehiveonline.oracle.com/teamcollab/profiles/[email protected]) can't access her workspaces. She is using Firefox on a Solaris 10 machine.
    Here is what she told me:
    "I clicked on the Start button under Team Workspaces, which took me here:
    https://beehiveonline.oracle.com/teamcollab/
    and displayed the familiar Content Encoding Error message."
    Please advise.

    Hi.
    Please let me know what is going on when we add people to a Beehive Online group (Solaris Curriculum).
    People are frequently getting this same error/message when trying to access several workspaces.
    New cases, please help me fix their access:
    [email protected] can't access https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    [email protected]: can't access: https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    Thanks.

  • HT1349 Getting an error message when trying to start itunes "new itunes library"

    I keep getting an error message when trying to open itunes " new itunes library"

    what error message?

  • Error message when trying to download itunes.

    I get error messages when trying to downlowd the new itunes for windows on my laptop.  It keeps saying I am not the administrator and I am logged on as the admin?

    What is the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

  • Getting error message when trying to access video on my iPad

    Hi this is my first time on this site so bear with me if I do the wrong thing.
    Here goes  I have read through some of the answers to the question but mostly they seem to related to YouTube.  My question relates to my iPad.  I get an error message when trying to view a video which I synced from my macbook pro.  The message reads "You do not have permission to access the requested resource"  The question is how do I get permission. Has anyone got an answer would be much appreciated.

    Hi this is my first time on this site so bear with me if I do the wrong thing.
    Here goes  I have read through some of the answers to the question but mostly they seem to related to YouTube.  My question relates to my iPad.  I get an error message when trying to view a video which I synced from my macbook pro.  The message reads "You do not have permission to access the requested resource"  The question is how do I get permission. Has anyone got an answer would be much appreciated.

  • Error -1020 When Trying to Access iTunes Store - Help!

    I keep getting Error -1020 when trying to access the iTunes store. Just started happening this morning.
    Nothing online from customer support listed for this error.
    Thanks!

    Looks like it's busted. Same problem here. The way all the support mechanisms work, you can't even report the problem, since you can't really log in to the store.

  • Weird Error Message when Trying to Install iTunes 10

    I had to uninstall iTunes recently because it was getting an error message when I tried to open it and that message suggested I remove and reinstall it. Now when I try to install iTunes 10 (I had a lower version before, iTunes 9.something), I get this message:
    An error occured during the installation of assmebly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x76"'. Please refer to Help and Support for more information. HRESULT: 0x8007054F
    I absolutely hate messages like these, you can't do anything with them and it makes you feel like the problem is unfixable. Hopefully that's not the case because until this is fixed I have no iTunes or Quicktime.

    Through my own cunning and genius, I have found the way for someone else to guide me step-by-step exactly what to do.
    For anybody else having this problem, GO HERE: http://support.microsoft.com/default.aspx?scid=kb;en-us;946414
    The solution is that "Regedit" thing where you delete certain parts of your registry and then restart your computer. Just do like it says there and you'll be good to go. Finally, this nightmare of epic proportions is over, and I can get back to playing airsoft.

  • Fix for "Not Connected" Error Messages When Trying to Access Web Services

    If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
    Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
    The first thing I would try in this situation is a network reboot.
    First, disconnect the power cord from the back of your router. 
    Next disconnect the power cord from either the back of the printer or the wall, without powering it off first. 
    Wait about 30 seconds and reconnect the power cord to your router.
    Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
    Once everything is back up and running, try to access ePrint or your Apps.
    If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
    Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
    After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
    Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
    Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.  
    For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
    For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
    Click apply and when the message pops up saying that the changes have been applied, press "OK". 
    Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
    After doing this, go ahead and try to enable ePrint again.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect. 
    I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for