Error message when trying to change Foreground/Background color

Just in case anyone is having this problem in Photoshop CC where when you try to change/exchange or set to default the Background/Foreground colors and you get an error message of something like "Could not complete because of program error". I found the cure for this in an archive from when CS6 was in beta testing. Basically you have to delete the preferences file and restart the program. Here's a link to the article  http://forums.adobe.com/message/4336237. Apparently this "beta" problem can still occur as I am using the most recent version  of Photoshop CC.

If you are trying to change the settings of your Router using the LELA software, and if you are getting an error message "Unable to Save the Data" its better you can exit from the LELA software and change all the Configuration settings on your Router Manaully.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings,  Click on the Wireless tab
Below you can make the changes on your Router ( SSID, Channel and let the SSID Broadcast should be Enable) and click on Save Settings... 
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the security Mode to WPA Personal and under Passpharase type in your Security password and click on Save Settings.. 
Once done, Now on your computer try to connect to your Wireless Network. Once connected you should be Online from your Computer. 

Similar Messages

  • Why do we get First operand...error message when trying to change password

    Hi
    I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
    We are using PeopleSoft Financials 8.8 SP1.
    We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
    I cannot replicate it in our test environments.
    I have confirmed that we have the PSWDEXPR permission list in our environment.
    I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
    I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
    The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
    Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
    The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
    Any suggestions?

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • Error message when trying to change password...

    I get the following error when I try to change the router password in the main splash window(left panel)...
    Error code: 82BD0302
    Error description: An HNAP call to the device was rejected due to incorrect authentication credentials.
    Model name: unknown
    Model number: E3000
    Serial number: CVQ01L209371
    Firmware version: unknown
    Operating system: Windows XP SP 3
    Software version: 1.3.11006.1
    Connection type (WAN): unknown
    IP address (LAN): unknown
    IP address (WAN): unknown
    Computer IP address: 192.168.1.114
    Also, this is very important... the router has changed the main admin password to the wireless pasphrase and I cannot undo it! When I change the password back to what I want it to be and save it acts like it is working but then when I start up Cisco Connect it tells me the password has been changed back to what it was prior to changing and saving it.

     Also, this is very important... the router has changed the main admin password to the wireless pasphrase and I cannot undo it! When I change the password back to what I want it to be and save it acts like it is working but then when I start up Cisco Connect it tells me the password has been changed back to what it was prior to changing and saving it.
    Sounds to me like you'll have to uninstall / reinstall Cisco Connect.

  • Error message when trying to change brush colors.

    Using CS6 beta and everytime I use the color picker or hit the x or d key I get this message: could not complete your request because of a program error.
    Using Windows 7 64 bi and CS5 works fine.

    A few common troubleshooting solutions:
    Restart Photoshop and/or your computer.
    Make sure your operating system and drivers, including your graphics driver, is up to date. (Check with the manufacturers website).
    Reset Photoshop's preferences: http://forums.adobe.com/message/4209421#4209421

  • I have and Access is denied. You do not have sufficient privileges in CS4 error message when trying to change a directory name in CS4

    Hi I keep getting this message in CS4 (access is denied. You do not have sufficient privileges)
    Can anyone help to gain privileges?
    Daryl

    Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?

  • I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

    I receive the following error message when trying to publish site changes to iweb:
    "Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
    Can anyone assist?

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    ... and then republish.

  • Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

    Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
    Have repaired , reinstalled , created and used a restore point etc etc
    How do I fix this !!! Please

    ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

    I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

    This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
    "How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
    So if anyone has any more hints I'd be very grateful.

  • I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon  a lockdisk or you do not have write permission on this file. How do I resolve this problem?

    I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon  a lockdisk or you do not have write permission on this file. How do I resolve this problem?

    Repair iTunes Security Permissions
    Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
    If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
    Repeat with the media folder if it isn't stored inside the main iTunes folder.
    If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
    The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
    tt2

  • Error message when trying to play the Youtube video only on Firefox. Is it about regulations or matter of Youtube?

    Ever since Youtube "change casting" (about 6 weeks ago), i can't see anymore a Youtube video even amid other sites or bloggs, with browzer mozilla firefox only (the others do it!!) because all the time sent me an error message when trying to play it. I have downloaded every latest versions of Java, Flash player, Sokwave flash player and i uninstall and reinstall all of them plus the plug ins of Firefox and the Firefox (at the end) when i put the last version 9.1 .I have this problem from updating the v8.0 when mozilla team turn off my java plug in as old (and so many others) but there isn't any new version and i can't uninstall it!.
    Please give me a comprehensive answer to every possible direction. Thank you!

    option-click the video track you want to adjust and drag away or trim away. The audio tracks will remian in place

  • Error message when trying to download iCloud to my Vista PC

    I am getting the following error message when trying to download iCloud to my Vista PC. "Cannot download iCloudSetup.ext from supportdownload.apple.com. The connection with the server was reset.

    I would suggest you to run the fix it tool from the link mentioned below and then check if you can install the softwares.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall (applicable only for 64 bit operating system)
    Also follow these steps before you proceed with the installation of ITunes.
    Download and install:
    Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update
    http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072 -9112bab119c2&displaylang=en#filelist
    Also, make sure that you have iTunes installer installed on your computer or else download and install it.
    Uninstall all iTunes software from Program and features.
    a)    Click Start button, click Control Panel, click Programs, and then click Programs and Features.
    b)    Select  the program, and then click Uninstall.
    c)    Uninstall or change a program
    http://windows.microsoft.com/en-us/windows7/Uninstall-or-change-a-program
    Also refer the link mentioned below
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923

  • Error message when trying to use config editor

    I received the following error message when trying to deploy the changes to the device:
    CEDT0031: no command is available to download for the device X.X.X.X. REmove the device from the job and try again.

    You can't do that.  Instead, just remove "aaa new-model" from the config then try to deploy it.  Alternatively, you can try "merge mode," but that will send the whole config back to the device.

  • Error message when trying to import CD into itunes

    Error message when trying to import CD into itunes.  "Error occured while converting the file 'name of song' The required disk coannot be found"

    Hi Grigsby9,
    Thanks for using the Apple Support Communities. This error usually appears when your iTunes Media folder location is incorrectly configured in your iTunes Advanced preferences. Let’s check these preferences to makes sure that iTunes is point to a folder that exists:
    Locate and organize your iTunes files - Apple Support
    http://support.apple.com/en-us/ht1391
    Find and change the iTunes Media folder location
    You can change the iTunes Media folder location to share music between accounts on the same computer.
    1.Mac OS X: Choose iTunes > Preferences.
    Windows: Choose Edit > Preferences.
    2. Click the Advanced pane.
    - Matt M.

  • I have Mac OSX 10.5.8 and get java "error" message when trying to use research tool on Morningstar Java referred me to Apple but they had no update.Any ideas? thanks.e

    I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.

    Well I solved my problem.
    What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
    Anyway... relinking my folder of audio files did the trick.
    If you don't already know how here are the steps...
    iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

  • Why am I receiving an error message while trying to change my phone number?

    So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."  I was hoping to circumvent the 15$  fee of doing it over the phone. Finally, I decided to do an online chat, the associate did not know why the error was occurring but informed me in order to change my number over chat, i would STILL have to pay the 15$ fee. Something struck me as so wrong there, so conveniently the change features and phone number part of the website was not working, however the view/pay your bill part was always working properly, never received any error messages there. I understood it was not the associates fault however. Still that is wrong. If it was not urgent I would wait. Yes I could have tried the number block, that section was not working either, but having to renew which numbers you want blocked every couple of months makes no sense to me, if I want something blocked, i want it blocked permanently not just for 90 days.  Yes I tried call/SMS blocker apps from the app store but they're faulty in that they still give you notifications of when the blocked person/number called/text or do not always block everything all the time. But when it came down to it, even the associate encountered the error message while trying to change my number. So why is this happening. Verizon is expensive but the reception is better however theirs always issues when I need to fix something. Its frustrating

    Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee.  However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available.  I'm sure this will all work out for you if given some time.  Sorry. 
    So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."     

Maybe you are looking for