Error message when trying to copy a DVD with Roxio Toast v6.1.1

I'm trying to duplicate a DVD I made via Final Cut Pro and DVD Studio Pro by using Toast Titanium ver. 6.1.1.
About 3/4 of the way through the record process, I keep getting the following error message:
"Couldn't complete the last command because there was an I/O error.
Result code = -36"
Since I made this DVD myself, I don't believe there is any copy protection or region codes embedded.
The DVD has 2.72 GB of material on it.
Please advise, thanks.

Here are some things to try: Select the DVD in the Toast Copy window and choose Save as Disc Image from the File menu. When that is complete eject the DVD and insert your blank disc, choose the saved disc image with the Image File setting in the Copy window and burn your DVD.
Alternatively, drag the VIDEO_TS folder from the source DVD to your hard drive. Choose DVD-Rom (UDF) as the format in the Toast Data window. Click New Disc. Add your VIDEO_TS folder. Click New Folder and name it AUDIO_TS. Now burn your DVD.

Similar Messages

Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

I have a new hp-TouchSmart Envy 23. It has 2TB drive.
I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS) .
I have used easy transfer many times and I am reasonably experienced user .
I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW?
PLEASE do help. I would really appreciate very much .
THANK YOU
Adam

This thread may be useful.
Windows Easy Transfer will transfer from one drive to the other to mirror the original drive. What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive. If that is happening,t hen that error will be thrown.
Try using the advanced options and view the report to see what exactly is happening and triggering the message.
Let me know what happens.
The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Getting Error Message When Trying To Burn To DVD HELP!!!!!

This is the error message I am getting as soon as I click on the "burn" button.
The following warnings and errors were found during the validation of the current project:
- There seems to be too much motion menu content in your project. Correct this problem before you continue burning this project.
Any ideas? Please help ASAP, this project is for my grandpa's birthday and I'm trying to finish quickly!
~K

It's a good idea to check the Project Info (under the Project menu in iDVD) before burning a disc. If any of the Duration bars are in the red, then you need to go back and edit your project. Also check the Encoding type with your total Project Duration: if the project total is under 60 minutes choose "Best Performance;" if it is between 60 and 120 minutes you'll need to select "Best Quality."
Unless you have freed a lot of GB on your hard drive, iDVD will not be able to burn the disc. You'll need at least 15 -25 GB free on your boot drive in order for the app to do all that encoding. It takes a lot of brainwork to turn a 13+ GB movie project into a 4GB DVD file.
When your project is ready to burn, choose File > Save as Disc Image. This tells iDVD to do all the encoding, and will result in a disc image file that you can mount in your DVD Player app to see that all is well. If so, you can quickly burn the disc image with Disc Utility or an app like Toast. If not, then you haven't burned any coasters. Another advantage is that you will be able to burn duplicates of the disc image very quickly, without going through all that encoding again, should other relatives request a copy.
Regards.

Error message when trying to copy files from memory stick to MacBookPro

Trying to copy files from my memory stick to my MacBookPro and have started to get a crazy error message - "Attempting to copy to the disk Macintosh HD failed. You do not have enough access privileges for this operation."
I've never had a problem before today. Any help will be welcomed!

Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
Bryan

Error Message when trying to copy a picture and save it

Hi,
We have just recently started having this problem. When we are trying to copy and save any pictures or screens a pop-up comes up stating one of 2 things. One is regarding something about the remote connection or we get 'access denied'... These are not protected things we are trying to copy, it is on everything we try to copy and save.
Any ideas?
Thanks!

Satellite P205D-S8802
Has Vista's Service Pack 2 been installed? If you don't know, run winver.exe to find out.
Seems like it might be a firewall issue or a service may not be started. Please follow these instructions carefully.
1. Note the exact computer-clock time of such an error.
2. Open Event Viewer (eventvwr.msc) and expand Windows Logs.
3. Inspect the Application and System logs for an Error event at that exact time.
4. Do not try to manually copy anything from there. Double-click such an entry and then click the Copy button to put the details on your clipboard.
5. Paste that information without editing into your reply here. We need only the part down to where it says..
Event Xml:
-Jerry

Error Message When Trying To Burn A DVD

I just got a new MacBook Pro running 10.6.3 and when i try to burn a DVD using Toast 7. And I get this error message and the disk will not burn. Does anyone else get this message and how can I fix this.... Thanks
The drive reported an error:
Sense Key = Medium ERROR
Sense Code = 0x02
No SEEK COMPLETE

I know it sounds crazy on a new machine, but the slightest bit of dust or dirt can cause problems with the DVD - try running a lens cleaner disc through it and see if that helps ...

Error message when trying to Copy iPhoto Library

I am trying to backup my iPhoto Library from it's location on a WD external hard drive to another WD external hard drive. The Library is 54GB in size. When I try to copy the library, it copies about 1.1GB then I get this message: "The operation cannot be completed because you do not have sufficient privileges for some of the items."
I have used the Rebuild Photo Library to 1. Examine and repair iPhoto Library file permissions, and 2. Rebuild the iPhoto Library Database from automatic backup, and it still gives me the same message when I try to copy the Library.
I would appreciate any help.
Thanks

There must be a damaged file or files somewhere in the remainder of the Library.
Try Download iPhoto Library Manager and use its rebuild function. Set the Rebuilt Library onto the external.
This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Why do I get an error message when trying to sync my ipads with my imac

We have two ipads - version 2 I think - the last ones with the old style plug. Both are running IOS 7.1.1 Over the last week, every time I try to sync either ipad with my imac (27" - about 18 months old) which is running OSX 10.9.2 I get the following error message. "The Ipad cannot be synced. An unknown error has occurred (1723)" In every case it takes a while for the error message to appear - the sync gives every impression of rolling along just fine through the various steps - when it reaches step 5 of 6 (syncing photos) it seems to hang up, then after a while the error message shows up.
Interestingly, there are no photos on the ipad, so nothing to sync to the imac, but I discovered all of this when I tried to sync some photos in the other direction, from iphoto to one of the ipads. All I got was the pin wheel of death. I am running the most current version of iphoto too.
Any suggestions on how to fix this would be gratefully accepted.

Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
Good luck,
Hunt

ITunes displaying error message when trying to copy songs to iPod

I've been having intermittent problems with my iTunes/iPod setup since about the time I got an iPhone 3G. The problems were with syncing or not mounting correctly.
I'm still having the mounting issues but I'm no longer able to sync my contacts at all (I don't sync anything else). I manually add/remove tracks from the iPod, but can also no longer do this.
I have also tried resetting the iPod and restoring through iTunes. With the restore option I receive the same 'insufficient privileges' warning and it will not restore.
I have also recently upgraded to 10.5.7 (and repaired permissions before and after).
I'm fairly sure it's the iTunes setup on my current machine as when I use the iPod on my iMac I can easily add/remove items.
I'm tempting to use the restore function from the iMac but am skeptical it will work because the only thing new introduced to the MacBook is the iPhone. The iPhone syncs bookmarks, contacts, some photos, applications and that's it.
Anyone have some theories? I've read some places about the iPhoto cache being a problem but I deleted it and I'm still having the above issues. Boo.
Thanks.

Try this. When the stick is mounted on your desktop, right click "Get Info" and at the bottom choose "ignore ownership on this drive." See if that works.
Bryan

When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message. I also get an error message when trying to sync with iTunes that a backup session cannot be started. How do I fix this?

In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
It says: "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
"iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process.
Any advice????

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I get the following error message when trying to instal in copy: "Creative Cloud Installer" can't be opened because the identity of the developer cannot be confirmed.

I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I must re-install HDD, when tried to install application DVD with iPhoto,there was a error message, could not instal it again, I have LION 10.7.3. How can install application DVD again?

I must re-install HDD, but when tried to install application DVD with iPhoto,there was a error message, could not instal it again,
I have LION 10.7.3.
How can install application DVD again?
thanks
Dimitar

I've asked the hosts to move this post to Lion.
Here is a better place for you Lion posts.
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?view=discussi ons
What is HDD?
How to install most applications from DVD.
Place dvd in dvd drive.
Double click on dvd image if a folder didn't appear.
Double click on application icon in drive folder.
follow instructions.
Robert

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when trying to use media players on new T500 ( drivers? Other?)

Getting error messages when trying to use Windows Media Player or InterActual DVD player to play DVD or play Audio files.
Downloaded latest audio & Video drivers from Lenovo site , Windows XP 3 patch and latest apps from Win MP and InterActual...
Any further ideas? Help? :-)

Hello,
Thank you Community Members for providing a troubleshooting tip. It is very much appreciated. First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
VCAST Media Manager Specs
Next, uninstall the VCAST application and reboot your computer.
Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
VCAST Media Manager
If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
Thank you.
KellyW@VZWSupport

Getting error message when trying to burn cd's

hi i am getting a error message when trying to put certain cd's on i-tunes :
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
VIA Technologies, Inc. VT8366A-8233
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-01 13:35:51.
Video Display Information:
NVIDIA GeForce4 MX 440 (Microsoft Corporation)
** CD/DVD Drive Tests **
UpperFilters: GEARAspiWDM (2.0.6.1),
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
please could you help

Thanks for replying. I went to the store and bought CD's and DVD's of different brands, many of which I have used in the past. All but a couple of them worked. Maxell, Memorex, Verbatim and Sony did not work.
After several long discussions with AppleCare and some tests, they finally determined that the Superdrive needs to be replaced. So, I'm off to the Apple Store.
Thanks again!

Error message when trying to copy a DVD with Roxio Toast v6.1.1

Similar Messages

Maybe you are looking for