Error Message when trying to Execute Info Package

Hello,
I was wondering if anyone could help me out with the following error message.  I've replacated all datasources in BW.  The infopackage is an internal load meaning the source system is BW not R/3.  Any suggestions on how to remedy the following error message would be greatly appreciated:
"DataSource 80WBS_ELEMTM has to be replicated (time stamp, see long text)
Long Text:
The DataSource 80WBS_ELEMTM does not have the status of the source system in the Business information Warehouse.
The timestamp in the source system is 08/03/2006
The timestamp in the BW system is 06/27/2006

Hi Shelly,
If you cannot directly activate the InfoSourec and Transfer rules by double clicking, then do so through SE38 > RS_TRANSTRU_ACTIVATE_ALL.
Hope this helps...

Similar Messages

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Error Messages when trying to install, uninstall or run iTunes 9

    I get the following error message when trying to Install iTunes:
    The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
    I search my entire computer for the file but it's not there.
    Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
    "The feature you are trying to use is on a network resource that is unavailable"
    Catch-22, I can't install or uninstall and when I try to run iTunes I get:
    "The action is only valid for products that are installed"
    Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

    wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
    ok here is what you need to do:
    go to the link below and download the Microsoft Windows Installer CleanUp Facility.
    http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
    once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
    ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
    next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
    go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
    Hope it works for you mate!

  • Error message when trying to download iCloud to my Vista PC

    I am getting the following error message when trying to download iCloud to my Vista PC. "Cannot download iCloudSetup.ext from supportdownload.apple.com. The connection with the server was reset.

    I would suggest you to run the fix it tool from the link mentioned below and then check if you can install the softwares.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall (applicable only for 64 bit operating system)
    Also follow these steps before you proceed with the installation of ITunes.
    Download and install:
    Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update
    http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072 -9112bab119c2&displaylang=en#filelist
    Also, make sure that you have iTunes installer installed on your computer or else download and install it.
    Uninstall all iTunes software from Program and features.
    a)    Click Start button, click Control Panel, click Programs, and then click Programs and Features.
    b)    Select  the program, and then click Uninstall.
    c)    Uninstall or change a program
    http://windows.microsoft.com/en-us/windows7/Uninstall-or-change-a-program
    Also refer the link mentioned below
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923

  • Error message when trying to do software update

    Im continually getting an error message when trying to update software. I'm not sure what is relevant in this information but would appreciate any help at all.
    Process: Software Update [19045]
    Path: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
    Identifier: com.apple.SoftwareUpdate
    Version: ??? (???)
    Build Info: SoftwareUpdate-2560000~4
    Code Type: X86-64 (Native)
    Parent Process: launchd [128]
    Date/Time: 2011-01-13 09:43:24.817 -0500
    OS Version: Mac OS X 10.6.5 (10H574)
    Report Version: 6
    Interval Since Last Report: 377764 sec
    Crashes Since Last Report: -30267
    Per-App Crashes Since Last Report: 21
    Anonymous UUID: 9BD40B43-082A-4C62-A888-ECA781942B28
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/PackageKit
    Referenced from: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
    Reason: image not found
    Binary Images:
    0x7fff5fc00000 - 0x7fff5fc3bdef dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
    Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.48f2
    Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
    Serial ATA Device: MATSHITADVD-R UJ-868
    USB Device: iPhone, 0x05ac (Apple Inc.), 0x1297, 0x24100000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000
    USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0702, 0x26200000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000

    Dyld Error Message:
    Library not loaded: /System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/PackageKit
    Referenced from: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
    Reason: image not found
    This indicates a mucked up installation, since the SU can't find the PackageKit file. Reinstall Snow Leopard from your install disc.

  • Error message when trying to update

    error message when trying to update

    And that message is exactly what? What system? What update? You need to be a lot more specific and provide more info.
    Mylenium

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • Acrobat 9.0 error message when trying to open

    Just got this error message when trying to open Acrobat Pro 9.0:
    Has been installed for 6 month, use 4-5 times per week, never had an issue until this. Usually I would do an 'Uninstall' 'Reinstall' before coming to the forum, but it will not allow me to do a 'deactivitation'.Any help at all, thanks.
    System Info:

    Good day,
    You can initiate a Repair installation from Control Panel > Programs by clicking on the Acrobat 9 installation, choosing 'Change' then following the prompts for a repair install.
    I missed the part where you mentioned the error was occurring on launch.  Sorry about that.
    Kind regards,
    David

  • I recently upgraded to Mac OS X.  I hadn't try to access anything in iWorks 09 since the upgrade, until now.  I get an error message when trying to open any of the iWorks 09 applications.  What's the fix for this?

    I recently upgraded to Mac OS X.  I haven't tried to access anything in iWorks 09 since the upgrade, until now.  I get an error message when trying to open any of the iWorks 09 applications.  What's the fix for this?

    Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

  • HT201318 I keep getting an error message when trying to purchase asdditional icloud storage. All information is up to date.

    I get an error message when trying to purchase addtional icloud storage.  All of my credit card and account information is up to date.

    This behavior was described here many times.
    Apple delivered a technote about that.
    Go to my public BOX (address below)
    Download :
    public_YK›
    for_iWork'09›
    other_iWork'09 items ›
    uninstall iWork '09.zip
    Expand the archive then run the script.
    After that, reinstall the application (or the entire package)
    If you bought Pages thru the Mac App Store, there is no need to pay one more time.
    Yvan KOENIG (VALLAURIS, France) jeudi 26 avril 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

  • Can see list of old emails, but error message when trying to view message.

    Ok, after a Mail crash (10.4.1), there were no accounts listed and of course no old emails, sent or in the inbox, were visible.
    We reentered all the account info, as if we were starting anew, and now we are able to see the list of all old emails in the inbox and sent mailbox, but when we click on any message before the crash, we get this error message:
    The message from David Crandon, ([email protected]), concerning (the subject of the email), has not been downloaded from the server. You need to take the account online in order to download it.
    Now, obviously, the accounts are online because we can send and receive new emails with no problem, and of course, the old emails aren't going to be on the server anymore.
    Can anyone help?
    Thanks.

    Well, didn't work. I spent an hour and a half just trying to get my 76yr old uncle to back able to drag and drop into the correct folder, and then trying to find the file when he didn't....!
    Anyway, it didn't work. After removing the Envelope Index file, and reimporting the messages, everything was the same. He could still see all his old emails in the list in Mail, but got the same error message when trying to view them.
    Then, we rebuilt the inbox, and now none of his old messages are visible! However, they are still on the computer.
    All his old emails are ".emlx" files and if we click directly on one of them, then Mail will launch and display the message properly in it's own window. But again, we get the above error message if we try to view it by selecting it from the message list in mail.
    One interesting thing...in the Library->Mail folder their are two folders, "Mailboxes" and "Mailboxes.mbox". Both at the same level. It's the Mailboxes.mbox folder that has all his old emails. Although all the old ones have the suffix ".elmx". In the Mailboxes folder are all the new emails since we reset all the prefs in Mail after the crash a couple of days ago.
    Anymore help please to get mail to recognize all these old emails?
    Thanks,
    David

  • What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

    What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

    You mean when you try to just start it?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • TS1394 im getting an error message when trying to install the snow leopard application cd 2. need  help.

    im getting an error message when trying to install the application cd on my Imac os x 10.6.4   what can I do to solve this problem?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Error message when trying to open windows7 via vmwarefusion.

    error message when trying to open windows7 via vmwarefusion.;
    Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
    I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere?  I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp?   It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up.  I'm almost certain  it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
    I've uninstalled vmare completely and reinstalled, it, but the problem persists.
    Any help?

    You will probably get a better response asking this question in VMWare's forums for Fusion.
    Best of luck.

Maybe you are looking for