Error message when trying to import Quicktime movies

All of the sudden, I'm getting this weird error message when trying to import various Quicktime movies. I've never seen this message before:
File Error: 1 file(s) recognized, 0 access denied, 1 unknown
Any thoughts why this might be happening? Any input would be appreciated.

I now see that two of them have been encoded using the AAC, Sorenson Video 3 codec which is not one I've seen before so I suspect that would be it.
The other one I'm having trouble with is encoded using Integer (Big Endian), Animation. I know I've seen the Integer (Big Endian) codec before so do you think that because it's animation that's a problem? I imported several other uncompressed files that were encoded with Integer (Big Endian) that worked fine so that's my suspicion.
Tom, you've always been very helpful on these boards for my questions. Thank you so much.

Similar Messages

Error message when trying to import CD into itunes

Error message when trying to import CD into itunes. "Error occured while converting the file 'name of song' The required disk coannot be found"

Hi Grigsby9,
Thanks for using the Apple Support Communities. This error usually appears when your iTunes Media folder location is incorrectly configured in your iTunes Advanced preferences. Let’s check these preferences to makes sure that iTunes is point to a folder that exists:
Locate and organize your iTunes files - Apple Support
http://support.apple.com/en-us/ht1391
Find and change the iTunes Media folder location
You can change the iTunes Media folder location to share music between accounts on the same computer.
1.Mac OS X: Choose iTunes > Preferences.
Windows: Choose Edit > Preferences.
2. Click the Advanced pane.
- Matt M.

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I Get an error message when trying to import cd's

I keep getting an error message when trying to import cd's - "You don't have write access for your media player"
I already tried going to the itunes media folder and unchecking the "read only" box but it didn't help.
I recently changed computers but since then I've copied cd's to my itunes folder with no problems. Now I get this message.

Try a couple folders up - a parent folder's permissions can cause problems with a child subfolder.
And don't just rely on the read-only box. Go to c/users/username/music, right-click and get permissions, go to the security tab and make sure your username has full control and ownership.

I get an error message when trying to update quicktime player

why do i get an error message when i try to update quicktime player that says "the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below".. when i try to locate the file quicktime.msi, i am unable to locate it anywhere on my pc, which then will not allow me to complete the installation, nore will it allow me to uninstall the application.

"the feature you are trying to use is on a network resource that is unavailable", and further states that "click OK to try again, or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below"..
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another QuickTime install. Does it go through properly this time?

Error message when trying to import photos into Bridge CS5

Hi, when trying to import photos from a card reader into Bridge CS5, I click "get Photos" and get the following error message: "cannot obtain all files from this device. Please ensure the device is connected properly, or that the battery is charged". It imports a small selection of the images from the sd card but that is all. I'm currently using a Windows 7 desktop computer with plenty of ram.
Any suggestions?

Hi station_two, thanks for your quick response.
I can confirm that its not the card reader/cable, usb port, defective sd card or the computer itself. I have already eliminated all these potential culprits through trial and error using different several ports/cards/readers and even a different computer (although not into bridge).
I am able to copy the photos from the same card/card reader into Lightroom on the same computer (incidentally, when using Lightroom it uses the term 'Import photos'!)
I am using a number of Panasonic Lumix Micro 4/3s cameras (GH1/GF1/GX1). The sd cards have a combination of RAW and JPEG and the problem exists whether using 4GB or 16GB cards. I have plenty of space left on my hard drive and as stated, I'm running a fast desktop PC (Win 7 Ultimate 64 bit OS) so I'm certain this is not the issue.
Could this possibly be a problem with the cache?

Error message when trying to play a movie

hi i am trying to watch a rented movie when i gat an error message suggesting trying later error number = (-42110) not sure why any help welcomed

Hi there, annalese2012!
I've done a little research on that error code for you and it looks like it is mentioned in an article we have online, located here:
iTunes: Possible iTunes Store errors
http://support.apple.com/kb/ts1424
The article suggested for dealing with that error code can be found here, and it is the advanced iTunes Store troubleshooting article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
It looks like this section in that article specifically has the information you might need:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT1657 I got an error message when trying to play rented movies

I got this error message when I tried to play rented movies after downloading.
"We could be complete your iTunes Store request. An unknown error occurred (-42110). There was an error in iTunes Store. Please try again later."
Anyone has similar experience?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

Error message when trying to import a CD into iTunes

I get an error message when I try to import a CD into iTunes that says the disk cannot be found. I recently requested to uninstall Tune-up because I kept receiving annoying messages to purchase the software. It looks like Tune-up is deactivated, but now I can't import music. Any suggestions?

Without much to go on I think your drive is having problems. It may be something minor such as dust which could possibly be removed using a drive cleaning disc (computer supply store or CD store), or it could be an irregular error in a laser, or tracking, or loose cable, or...
One way to eliminate any iTunes possibility is if it is consistently doing this with a particular CD then try an alternative ripping tool such as XLD or Max.

Error message when trying to import iMovie 08 project

I am trying to import an imovie file into final cut express when this error message tells me it can not be done due to a critical error
Any ideas?
Thanks.

Hi(Bonjour)!
What kind of video and audio media did you use in this project?
Is there any iTune purchased song in your iMovie project?
Michel Boissonneault

Lightroom Error message when trying to import photos.

I have a Canon 6D and Apple laptop with latest versions of software that I am aware of. Tonight I tried to import images from Micro SD card (inserted directly into laptop) but each time I am getting an error message stating that it can not read my files. It has previously downloaded files from this camera and memory card. The error message is generally giving the number 337 but has also given 555 and 1. I am not sure what has changed and do not know how to fix it. I have tried leaving the SD card in the camera and connecting it directly to the laptop via the cable and it gives the same message. I have also tried googling these error codes but can't make out specifics of the problem and how to fix it.

The “Cannot be Read” message when using LR to import directly from the card or camera means the DESTINATION you have specified in LR is not writable by LR. LR first copies the files to that destination, then LR tries to read the files from there, and it is the second step, the read, that gives the error.
Check your destination and make sure it is where you intend LR to be importing the files to off the card, and make sure it is writable.

Error message when trying to open Quicktime player 7.2 in Windows Vista

I have tried uninstalling and then reinstalling the Q Player a couple times but I still cannot get the player to run. This is the error message that pops up:
Microsoft Visual C + + Runtime Library
Buffer overrun detected
Program: C:\Program Files\Quicktime\QuickTimePlayer.exe
A buffer overrun has been detected which has corrupted the program’s internal state.
The program cannot safely continue execution and must now be terminated
Thank you in advance for any help you might have for me.

Let's try swapping out your QuickTime one more time, taking a few additional precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. In the Start menu, click "Computer".
2. In "Computer", open "Local Disk".
3. Open "Program Files".
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime and QuicktimeVR.
7. Restart your computer.
Now try another QuickTime install. Does it go through properly this time?

I get an error message when trying to import pictures from iphone to iphoto(Imac)

I get an error message trying to import photos from phone to imac. have 266 photos to get on my computer. how can i get these pictures off iphone onto my imac.?

Try a couple folders up - a parent folder's permissions can cause problems with a child subfolder.
And don't just rely on the read-only box. Go to c/users/username/music, right-click and get permissions, go to the security tab and make sure your username has full control and ownership.

Receive an error message when trying to import any videos from iphone to iphoto on my desktop. Help?

I have 6 videos on my iphone, varying in length from 24 seconds to 11 minutes, that will not import to iphoto. I have tried to import them as a group and individually but get a message that 'there was a problem accessing the file.' I had no difficulty importing over 300 photos from the phone to the desktop. Any suggestions/help would be appreciated. Thanks. Anne

See if you can use Image Capture to upload the video files to a folder on the Desktop and then import from there into iPhoto.
OT

"Input contract violation" error message when trying to import a .wav file into AE?

I am trying to import a .wav file into AE and keep getting an "input contract violation" message from the program followed by it shutting down. If it means anything, I bought the song online, but it has been paid for and I downloaded the .wav file after my purchase. Any idea of why this may be happening? Are there any particular settings which may be mandatory on the project timeline to import a 3min song? Thank you!

YOu have not provided any system info, not told us what version of AE you use, your audio setting, what specifics in the audio file and a million other things. See how it may not be possible for anyone to tell you anything beyond "Your computter sucks!" ???
Mylenium

Error message when trying to import Quicktime movies

Similar Messages

Maybe you are looking for