Error Message when trying to load PSE11 editor in Windows 8

Hi, I can't seem to launch PSE11 Editor neither directly from the file location (C:\Program Files (x86)\Adobe\Photoshop Elements 11) nor through the Load screen.  I've tried to attach a shot of the error message, but alas, windows 8 isnt even letting me do that on this browser - The text of the message says "The application was unable to start correctly (0x0150002).  Click OK to close the application."  Can someone please help?

See if this blog resolves your issue: http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
~Surendra

Similar Messages

  • Error message when trying to use config editor

    I received the following error message when trying to deploy the changes to the device:
    CEDT0031: no command is available to download for the device X.X.X.X. REmove the device from the job and try again.

    You can't do that.  Instead, just remove "aaa new-model" from the config then try to deploy it.  Alternatively, you can try "merge mode," but that will send the whole config back to the device.

  • Sql@loader-704  and ORA-12154: error messages when trying to load data with SQL Loader

    I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
    The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
    The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
    The first time I loaded the data i did it from a command line with SQL loader
    Now when I try to load the data I get this message:
    sql@loader-704 Internal error: ulconnect OCISERVERATTACH
    ORA-12154: tns:could not resolve the connect identifier specified
    I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
    I am able to  connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
    However SQL Developer will not let me load a file this big
    I have also tried to load the file within Apex  (SQL Workshop/ Utilities) but again, the file is too big.
    So it seems like SQL Loader is the only option
    I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
    Not sure what else to try or where to look
    thanks

    Hi,
    You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
    open a command prompt
    set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
    This will tell oracle use the config files you find here and no others
    then try sqlldr user/pass@db (in the same dos window)
    see if that connects and let us know.
    Cheers,
    Harry
    http://dbaharrison.blogspot.com

  • Error message when trying to load iTunes

    Every time I've tried to load iTunes by clicking on the icon I get the error message "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    Anything I can do about this or is it out of my hands?
    btw, I updated my version before asking this question

    Try to open quicktime player
    If quicktime does not open, then quicktime needs to be reinstalled.
    If quicktime does open, then some other program is blocking itunes.
    The easiest way to reinstall quicktime is to:
    1. try to remove quicktime from control panel > add/remove programs
    1A. some times quicktime will not uninstall. That's ok
    2. drag the c:\program files\quicktime folder to the desktop
    3. open c:\windows\system32\
    4. drag any thing that has the full word "quicktime" (not a qt or particial word) to the desktop. (This would be something like quicktimevr.)
    5. close my computer
    6. back in add/remove programs, find itunes
    7. click on change/remove
    8. when the wizard comes up choose repair itunes.
    This process will reinstall the version of quicktime needed to your computer.
    Now if quicktime player opens ok, here is an article from the appe support website that might help.
    http://docs.info.apple.com/article.html?artnum=302538

  • Persistent error message when trying to load a VOD show

    For the past few weeks, I keep getting an error message whenever I try to watch anything on VOD. The message says try again later but after repeated attempts it ususally doesn't work. Although, on one or two occasions I finally got the program to load and play.  I've called the technical assitance number and after about 20 minutes answering questions to a machine I finally gor a human on the phone who had me reset the STB and then said it was a technical error on their side and nothing they could do and no ETA on when it would be fixed. This seems to happen a lot on weekend nights so I dont know if its a capacity issue but it's very fustrating especially when I'm paying for premium channels but can only watch them in real time.
    Is anyone else experiencing this problem? Any advice?

    Major160 wrote:
    For the past few weeks, I keep getting an error message whenever I try to watch anything on VOD. The message says try again later but after repeated attempts it ususally doesn't work. Although, on one or two occasions I finally got the program to load and play.  I've called the technical assitance number and after about 20 minutes answering questions to a machine I finally gor a human on the phone who had me reset the STB and then said it was a technical error on their side and nothing they could do and no ETA on when it would be fixed. This seems to happen a lot on weekend nights so I dont know if its a capacity issue but it's very fustrating especially when I'm paying for premium channels but can only watch them in real time.
    Is anyone else experiencing this problem? Any advice?
    Hello,
    Follow-up questions:
    Is the VOD error message usually showing just on one set top box or all set top boxes in your household?
    If it's happening to all STBs, then either there is a temporary network outage in your area or you lost connectivity to the router.
    If it's always the same set top box that has the VOD error message, what model STB is it?
    When this happens again you can try:
    a soft reset of router by unplugging the router for 30 seconds and then plugging it back in.  Then try seeing if VOD works at that point,
    rebooting the STB via the FiOS TV remote:  Menu -- Customer Support -- In Home Agent -- Reboot STB.
    going to this link (and selecting Troubleshoot Now) for further steps:  http://www22.verizon.com/support/residential/tv/fiostv/guide/video+on+demand/questionsone/123196.htm
    If all else fails and you still have the VOD message, you can try contacting Verizon's Technical Support via livechat at www.verizon.com/contactus or by calling 1-888-553-1555.
    By the way, you can also download and stream Flex View videos on demand via your computer online or your mobile device. You can start watching the movie on your computer and then resume later or play from start (within 48 hours of renting the movie) on the TV.   This is for those pesky times (*sigh* unavoidable) when VOD does not work on the TV and you really want to watch that movie.
    For more information about Flex View, you can go to: https://www22.verizon.com/OnDemand/unprotected/ondemandhome.aspx
    or www.verizon.com/flexview
    Hope this helps!

  • Loaded the newest IOS and I get error message when trying to load I messaging and Facetime.

    I have an Ipad mini 2 and I downloaded the software update  IOS 8.1.3. Now when I try to use facetime and I-messaging it gives me an error message : (An error occurred during activation. Try again.)
    I have tried turning the applications on and off, I have turned off the I pad and restarted it. I made sure I was on the Wi-Fi. I even made sure the date and time zone were correct. None of these things have made any difference.
    Does anyone have a fix for this problem. Is there a way to reload the last IOS update? Any help would be appreciated.
    Peter

    Hey Peter Manring,
    It is my understanding that you are receiving an activation error when attempting to use FaceTime or iMessage. I have an article that should be able to help you address this issue, and it can be found below:
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    http://support.apple.com/en-us/HT201422
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Hp g6-1278sa get blue screen and error message when trying to load xp pro

    I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
    Windows XP pro 32bit and windows 64bit.
    Unable to install XP pro, just goes into error and blue screen.
    Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
    Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
    Opptions windows 8 or earlyer windows.
    Windows 8 works fine.
    Windows XP pro starts to load and then we get the blue screen with error message.

    Hi     Powlers
       Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine 
        http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
                                                                                                    OR
        http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
              Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
                                                           Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • "Port In Use" error message when trying to sync Palm m500 to Windows Vista machine

    An error message on my Palm displays "Error: Serial Port in Use (Serial 0307)" when I try to sync my Palm m500 to my Windows Vista (32 bit) Home Basic machine. It worked until about 3 months ago and I don't have a restore point that far back to try System Restore. I've upgraded to Palm Desktop 6.2.2 (was using 4.xx) and downloaded the PalmHotSyncSetup from Pimlico Software but nothing helps. Any ideas are appreciated.
    Post relates to: Palm m500

    I would try connecting the Palm's cradle, with the Palm in it, to your PC and then, in Device Manager, right-clicking on Palm Handheld #2 and selecting Uninstall Driver.  Palm Handheld/Palm Handheld #1 could be visible if you connect the Palm to USB port you may have tried using perviously.
    After uninstalling Palm Desktop, reboot the PC, make sure Palm Desktop 6.2.2 is installed (since you are using Vista) and then try reconnecting the Palm.
    One last thing: Make sure that you are using a 32-bit version of Windows.  There is no 64-bit USB driver support from Palm or ACCESS.  If you do have a 64-bit version of Windows Vista installed, that would clearly explain why you are having so much trouble getting your m500-series PDA to sync. This thread tells you how to check for a 32 or 64-bit install of Windows.
    Alan G

  • My elements 12 stopped working when trying to load the editor. Windows 7 shuts the progam downw

    When I try to launch the editor the progam says it stopped working. It displays message that windows 7 will find the solution and then comes back and says there are no solutions. I have removed and reloaded it, checked for compatibility and many of the actions that describe this in the forum.. Where is the Patch to make this work?

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    IF you have a laptop with dual graphics, read below... otherwise, ignore this part
    Dual video problems (some for Premiere Pro, but the idea is the same)
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Getting error message when trying to open I Tunes in Windows 7

    Getting error message: The I-Tunes application could not be opened. You do not have enough access priviliges for this operation. Just installed Itunes 64 bit in Windows 7 (64-bit)

    Since Office is not an Apple product, please post related questions on Microsoft's own forums for their Mac applications, as Apple discussions only provide support for Apple products:
    http://www.officeformac.com/productforums

  • RPC server unavailable error message when trying to load printer software (hpd1300inkjet), winxp

    When I try to load the sofware this is the error.
    I would imagine this would occur w/any printer--so its not specific to the inkjet that I have.

    Check that the Remote Procedure Call (RPC) service is running:
    Control Panel - Administrative Tools - Services
    Find Remote Procedure Call (RPC)
    Right click on the service, then select Properties
    Check the Service status: it should read Started
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HT5957 Getting an error message when trying to load the update iso7.0.2 on my ipad2...any help out there

    Tried turning ipad2 off and on, still getting error on loading ISO 7.0.2 update

    Message reads :  software update failed.  An error occurred downloading iOS 7.0.2.  
    I'm giving to choices:  CLOSE. or.  SETTINGS. 
    Either choice takes back to -   Download the update

  • Ve this error message when trying to load itunes how can I resolve it,

    Runtime Error
    Program:C:\Program Files(x86)iTunes\iTunes.exe
    R6034
    An applicationhas made an attempt to load the C runtime library in corectly.

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I keep getting error message when trying to d/l icloud for windows

    Chrome 31 on Windows XP
    IS YOUR WEB BROWSER UP TO DATE?
    Your web browser is up to date. 
    Why can't I download icloud for windows?

    Because you need WIndows 7 or later
    iCloud requires iOS 5 or later on iPhone 3GS or later, iPod touch (3rd generation or later), iPad, or iPad mini; a Mac computer with OS X Lion v10.7.5 or later; or a PC with Windows 7 or Windows 8 (Outlook 2007 or later or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require iOS 7 and OS X Mavericks. Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices.
    http://www.apple.com/icloud/setup/pc.html

  • HT5538 I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    HI,
    In effect this is a DNS block.
    You can do it.
    You need to be in an Admin Mac User Account that has  non blank password.
    Go to the Applications/Utilities folder and open Terminal.
    You should see your shortname (the one under the Little House icon) followed by the $ symbol
    Copy and paste the bold text below into Terminal after the $ symbol.
    sudo pico /etc/hosts
    This will load the file "hosts" into and editor that works in Terminal.
    Use the arrow keys to get to the line with Verisign in it.
    Now type the # symbol and it will be added in front of the character that is highlighted.
    The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
    Now use CTRL and O keys together.
    This Saves the changes.
    Quit Terminal.
    10:02 PM      Wednesday; May 1, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for