Error message when trying to order on line

Anyone else getting the below error message when trying to order the iPad2 online in Europe?
An error has occurred during your session. Please return to the Store Menu to continue shopping.

Be aware that this happened to me and when I contacted my credit card company, they said Apple had contacted them to take the money, yet no order is appearing on my account so now I'm stuck in limbo - my credit card company has approved the transaction yet I have no record or order number with which to question apple about it
The guy at the call centre also said he had received several calls about apple over the last 30 mins so this is not an isolated incident
S.

Similar Messages

  • I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

    I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars.  I downloaded it for the first time a month ago and  had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error.  What do I do now?  Can anyone help with this?

    Hello easbda,
    Thank you for providing the details of the calendar issue you are experiencing with your iPhone.  I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • I keep getting an error message when trying to download i tunes. It says it's looking for MSVCR80.dll and I find it on my computer so I don't know what else to do. Any suggestions?

    I keep getting an error message when trying to download itunes. It says it can't find "msvcr80.dll, but when I search for it on my computer it is there. My itunes was working just fine before I got the message to download the latest upgrade. I've not had any problems doing that before now, so don't really know what to do.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

    I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Error message when updating Sales Orders

    Hi Experts
    Following an issue over the weekend when I was forced to perform a  hard reset we are now experiencing error message when trying to update some sales orders. 
    This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
    it is not happening on all orders - i think only ones which were on the system prior to the reset.
    We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
    Event Type:     Error
    Event Source:     B1SynchService
    Event Category:     None
    Event ID:     0
    Date:          29/06/2009
    Time:          13:42:38
    User:          N/A
    Computer:     SQL01
    Description:
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
       at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
       at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
       at NetPoint.SynchSBO.Synch.SetCompany()
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
       at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
       at NetPoint.SynchService.NPSynchService.Main(String[] args)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
    Regards
    Jon

    Dear Johnny,
    the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
    Hope my reply helps you to solve the issue.
    Regards,
    Wesley Honorato

  • Can see list of old emails, but error message when trying to view message.

    Ok, after a Mail crash (10.4.1), there were no accounts listed and of course no old emails, sent or in the inbox, were visible.
    We reentered all the account info, as if we were starting anew, and now we are able to see the list of all old emails in the inbox and sent mailbox, but when we click on any message before the crash, we get this error message:
    The message from David Crandon, ([email protected]), concerning (the subject of the email), has not been downloaded from the server. You need to take the account online in order to download it.
    Now, obviously, the accounts are online because we can send and receive new emails with no problem, and of course, the old emails aren't going to be on the server anymore.
    Can anyone help?
    Thanks.

    Well, didn't work. I spent an hour and a half just trying to get my 76yr old uncle to back able to drag and drop into the correct folder, and then trying to find the file when he didn't....!
    Anyway, it didn't work. After removing the Envelope Index file, and reimporting the messages, everything was the same. He could still see all his old emails in the list in Mail, but got the same error message when trying to view them.
    Then, we rebuilt the inbox, and now none of his old messages are visible! However, they are still on the computer.
    All his old emails are ".emlx" files and if we click directly on one of them, then Mail will launch and display the message properly in it's own window. But again, we get the above error message if we try to view it by selecting it from the message list in mail.
    One interesting thing...in the Library->Mail folder their are two folders, "Mailboxes" and "Mailboxes.mbox". Both at the same level. It's the Mailboxes.mbox folder that has all his old emails. Although all the old ones have the suffix ".elmx". In the Mailboxes folder are all the new emails since we reset all the prefs in Mail after the crash a couple of days ago.
    Anymore help please to get mail to recognize all these old emails?
    Thanks,
    David

  • HT5731 Have 55GB available, but get error message when trying to download movie to add storage

    Have 55GB available, but get error message when trying to download movie to add storage

    Go to Settings>General>Usage>Storage. Let all of the apps load in the window. You can see how much storage you have used and how much you have left. You will need about twice the size of the download of free storage in order to be able to download the movie. Also, the iOS will not let you use every bit of available storage on the device.
    You can delete content in there if needed, but if you sync with iTunes it's a good idea to transfer purchased into iTunes and backup your iPad before you delete content. If you use iCloud only, backup with iCloud before you delete any content.
    How to transfer purchases into your iTunes library
    http://support.apple.com/kb/HT1848
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766

  • HT5538 I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    HI,
    In effect this is a DNS block.
    You can do it.
    You need to be in an Admin Mac User Account that has  non blank password.
    Go to the Applications/Utilities folder and open Terminal.
    You should see your shortname (the one under the Little House icon) followed by the $ symbol
    Copy and paste the bold text below into Terminal after the $ symbol.
    sudo pico /etc/hosts
    This will load the file "hosts" into and editor that works in Terminal.
    Use the arrow keys to get to the line with Verisign in it.
    Now type the # symbol and it will be added in front of the character that is highlighted.
    The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
    Now use CTRL and O keys together.
    This Saves the changes.
    Quit Terminal.
    10:02 PM      Wednesday; May 1, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Error message when trying to open windows7 via vmwarefusion.

    error message when trying to open windows7 via vmwarefusion.;
    Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
    I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere?  I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp?   It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up.  I'm almost certain  it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
    I've uninstalled vmare completely and reinstalled, it, but the problem persists.
    Any help?

    You will probably get a better response asking this question in VMWare's forums for Fusion.
    Best of luck.

  • HT204053 I am getting an error message when trying to sign into my icloud. Help

    Why do Iget an error message when trying to sign in my icloud?  Can you also tell me how to combinned my icloud accounts?

    If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup.  If you restored the entire backup you should recover them.

  • Error Messages when trying to install, uninstall or run iTunes 9

    I get the following error message when trying to Install iTunes:
    The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
    I search my entire computer for the file but it's not there.
    Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
    "The feature you are trying to use is on a network resource that is unavailable"
    Catch-22, I can't install or uninstall and when I try to run iTunes I get:
    "The action is only valid for products that are installed"
    Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

    wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
    ok here is what you need to do:
    go to the link below and download the Microsoft Windows Installer CleanUp Facility.
    http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
    once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
    ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
    next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
    go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
    Hope it works for you mate!

  • Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Keep getting error message when trying to sign in to make a Genius Bar Reservation

    Make the reservation by phone. 

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Maybe you are looking for

  • How Write a Program to send  TWO attachments in the same  mail.

    Hello, How to write a ABAP program so that when u run this program   it shd send two 0r more files as an attachment. Presently i know how to send a single attachment but not the multiple attachment. i.e. by using "send_api" function module . please r

  • Import into SLD does not work

    Hi to all, I want to synchronize the central sld of our production XI with the backup from the test sld, like in note 935474 grouping sld instances described. Import of CIM model works, import of backup of sld doesn't work. It is impossible to import

  • Call a Java Function From Abap

    Hi, I need to call a java function from ABAP,  I have a WAS 640 to deploy the module. I have found this tutorial... [ABAP calls Java via RFC|/people/thorsten.franz3/blog/2008/11/21/abap-calls-java-via-rfc-1-introduction] The problem is that it uses a

  • TextEdit: "The document 'filename.txt' could not be saved."

    This error is occurring frequently, to the point of extreme frustration. I keep a plain text file open all day at work and use it to keep track of minor things like calls and notes. Routinely, when I go to save this file, it reports the error message

  • Can't find file after downloading on vista

    The download box appears and completes download, but the file doesn't appear in the folder I chose.