Error Message when trying to "publish" webhelp file.

I need help please! After generating the webhelp file, when I click on the publish button, it starts to do what it is supposed to do then stops...giving me an error message that "file is already in use." Any ideas on how to fix this? Tnx!

Forget trying to "publish"....I really just want to send out the htm file out through email for review....Is that possible? When I tried it before, it looked like it was trying to open the file from my temp directory instead of where it is actually located.....

Similar Messages

I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

I receive the following error message when trying to publish site changes to iweb:
"Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone assist?

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish.

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Error message when trying to publish to iWeb

Got following message when trying to publish:
Publish Error: Asn error occurred while publihing file "/Web/Site/
iWeb/Dryton/Welcome_files/
navbar1rollover.png".
What does this mean? How can i fix.

If you're publishing to .Mac, try File > Publish All to .Mac

Error messages when trying to sync large files.

My 8GB Touch seems to have problems syncing large files, namely movies. I get at least one of these three error messages when trying to sync:
The iPod cannot be synced. The required disk cannot be found.
Attempting to copy to the disk failed. The device is not connected.
Attempting to copy to the disk failed. The disk could not be read from or written to.
It also isn't recognized in My Computer under Removable Storage. Any solutions to this problem? I'd really like to get my movies and TV shows synced.
I have a 30GB iPod video that works just fine.

I have been getting the same error as well, but I have 2 friends that own the same exact iPod touch model, and they don't have problems transferring 14 gigs in one session. If apple doesn't have a solution, I would recommend sending it in for repair, because it's an extremely annoying error that seems to not have any solution. The same thing happens on my brand new iMac as well.

"Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

Is anyone else getting this error message, "Entitlements are not valid", when trying to sync .ipa file from iTunes to iPad?
The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
So, I have a swf file that works and was able to publish it into the Android Market. I then compiled and build the same flash project with the Packager for Iphone into an .ipa file. But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message.
I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
Any help would be appreciated. thank you.

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

Error message when trying to export audio file to DVD

I recorded an interview on a portable voice recorder and transferred the data into Garage Band by connection of a cable connected to the headphone of the device to the speaker input in the Mac. Garage Band took the audio file. It is 1.5 GB. I did some minor editing and wanted to save the file onto a DVD. When I selected "share" to export song to the DVD, an error message came up stating that the file was over 2 GB, which it wasn't. The file was then broken in two and one part was "shared", but the same error message came up. I took the computer to the Apple store for the Genus to help me with, but he had the same problem. The only way that he was able to save the audio file to a DVD was to select the file and place the file on a blank DVD. However, it can only be listened on a computer with Garage Band. I intend to use my voice recorder again to interview people. How can I input the audio file in the Mac and have it saved on a DVD to be played on multiple devices?

Hi ,
Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
What software version are you using?
Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
I would also like to know what OS do you work on ?
Is it happening with all kinds of PDF you are trying to convert or any specific one?
Please update me with above mentioned details so that we can assist you further .
Regards
Sukrit Dhingra

Error message when trying to publish iWeb

I am getting the following error message when I try to update my Blog:
An error occurred while publishing file “/Web/Sites/iWeb/The Drytown Project/Blog/Blogfiles/navbar_separator0.png”.
What do I do to fix?

I have gotten these messages, too, and never at the same time or with the same file. Fortunately, I am able to work around them by logging in while holding Shift (to prevent other apps from loading), then publishing all to .Mac. Seems to work reliably, but takes a long time and is a pain in the rear workaround that Mac users shouldn't have to put up with.

Keep getting error message when trying to publish imovie '08

I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now?
thanks,

That error usually means "Disk Full". Could that be the issue?

Error message when trying to move audio file from iTunes to iPhone 4s

I have an audio file I'm trying to put on my iPhone 4s. I can open it with iTunes, but when I try to move it to my iPhone, I just get a message that it can't be moved "because it can't be played on this iPhone." My itunes and iphone are both up to date. I have iCloud activated but nothing has moved to my iPhone either

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

Error message when trying to publish an existing site to my FTP

My iweb crashed about two weeks ago. I lost it and finally got help from someone at Best Buy. iweb recovered! problem solved! So I thought! Most of my images were gone and I had to update most of my pages. Now when I go to publish, it says page already exist with the same file name and do I want to replace? I say yes and then I get an error message saying "Disk may be damaged or full, or I may not have sufficient access privileges. Can anyone Help??? I tried a few things, with no success.

First, try publishing to a local folder and, if successful, launch this version in the browser by double clicking the index.html file.
If this is OK your problem is with FTP or your server.
If you can't publish to a local folder or there are problems with the site, try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html

IWeb Error message when trying to publish site changes?

The 'publish error' says, "Can’t create the file “mwmac.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
No idea what this means or why I got it. I've published successyfully before. I did add a new jpeg to my file since last file but I can't imagine why that would be causing proglems. Any ideas?
I have the most up to date version of iWeb.

I have the same issue with the same error message, and this does not only happen when I am trying to publish to the internet, but also if I am trying to "publish" the changes to a folder on my mac book first. I don't have Mobile Me, and even if I did that would be defunct now anyway. This is my business & I really need to resolve this! Help!!!

Error message when trying to open AI file

When I double click an AI file to open it, I get this message: "Can't open the illustration. There is not enough room for the window, increase document area and try again". This error started happening about a week or two ago. Although it is inconvenient to have to go to File>Open and then locate the file to open it since I am used to doing it the other way at least it is a way to open the AI file. I just discoved that if I double click a graphic in a Adobe Acrobat Pro using the Edit Object I get the same error message. This is a problem.
I have checked previous discussions about this and tried things like unchecking the "open as tab" option in the preferences but that does not work.
I would appreciate any other suggestions since this is very annoying.
Thanks,
Jane
Creative Suite CS6
WindowsXP

From post 15 of this threaad:
http://forums.adobe.com/message/3899466#3899466
"I'll add an update to this problem using a Windows 7 Toshiba laptop running CS6 - I began to recieve the same message and Illustrator would resize itself to 1"h x 5"w box in the upper left of my screen. Illustrator itself would be hidden behind the error dialogue box.
This would happen when I'd select an Illustrator file in Windows Explorer. The first workaround was to maximize Illustrator and open the file through the Illustrator File>Open dialogue. This always worked.
The final fix was to manually resized illustrator to about 1/3 screen size and try to open the file again in Windows Explorer. Finally the files would open from Windows Explorer. Keep reading.
However, each time I opened a file Illustrator would do a little hula dance and resize a good bit smaller than what I'd manually set it to. It took about 4 resizes and 4 opening of files = each time resizing the illustrator window larger until it actually occupied the whole screen. It's working normally now."
Also, what happens if you open Illustrator and use File > Open?
--OB
Edit to add: There are other suggestions in that thread as well. Also several other threads dealing with the same subject if you search on the error message you are getting. <OB>

Error message when trying to open iTunes files.

I just began having the problem of an error message appearing...
... if I double-click on an iTunes audio file mp3, m4a, etc. or even drag the file directly on to the iTunes application icon.
I did a rebuild of LaunchServices and rebooted but the message still will appear unless the file is opened from an iTunes playlist.
Yet the file plays in iTunes... but the error message is still there and has to be dismissed.
Whereas if I open the same file(s) via the playlist... I get no error message and the file(s) play fine.
Also if I drag the files on to QuickTime 10.0 they play fine without displaying an error message.
Though the error message indicates it's a link problem... from the above... I don't see how it can possibly be since even dragging an audio file directly on to the iTunes application icon still results in the error message appearing.
I only discovered this today when downloading Piezo and I attempted to open the m4a files it saved. So I then tried to open other iTunes files in Finder windows rather than the iTunes playlist window and had the error message appear again.
I don't want to have to add every audio file to an iTunes playlist in order to open it without the error message so can someone please suggest a fix?
Thanks for any suggestions.
Ron
27" iMac, OSX 10.6.7, iTunes 10.5.2

Well I solved my problem.
What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
Anyway... relinking my folder of audio files did the trick.
If you don't already know how here are the steps...
iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

Get error message when trying to open a file in Adobe Indesign

Hi,
I would appreciate some help here.
Just installed ID, and want to get started. When I try to open any file (pdf. jpg etc) I get the following message:
"Can´t open file. It might be that Adobe ID don´t support the file format, that the plug-in-module that supports the file format are missing, or that the file is open in another program".
I have tried ID on both my PC and Mac - the same error message is shown on both computers. It must be said that I am normaly as PS and AI user, and have not tried ID before. Maybe it is an easy solution to the problem, thus Adobe chat line could not help me.
I appreciate any help you can offer!
Regards, Catherine A

click file > place formats to import graphic files.
http://helpx.adobe.com/indesign/kb/supported-file-formats-indesign-cs5.html

Error Message when trying to "publish" webhelp file.

Similar Messages

Maybe you are looking for