Error message when trying to put whole cd on ipod

Everytime I try to put a whole cd on my ipod, i get an error message that states this song cannot be played on this ipod. If i put mp3's on the ipod, it works fine. Is there a certain setting I need to be on?

Have you tried either of the free Ringtone converter programs - MusicTones or MiniTones?
Both can be found on freewarepalm.com. If you need help with either, I can assist...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Error message when trying to put pictures on my I-Pod

When I try to put pictures on my I-Pod, I get an error message "The file "dad.jpg" cannot be imported because it does not appear to be a valid exported file. This happens no matter which pictures I try to put on.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Why error message when trying to put in a transition?

I'm using iMovie 4 and can not put in a transition. I'm getting error message 4960, "error in system operation". I've successfully added transitions up until now. What gives? Thanks.

Have you tried either of the free Ringtone converter programs - MusicTones or MiniTones?
Both can be found on freewarepalm.com. If you need help with either, I can assist...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Error message when trying to put videos on my 30G ipod video

Every time I try to put videos from iTunes onto my ipod I get an error message saying that the video "could not be copied onto "Brennen's Ipod" because it cannot be played on this iPod".

Hey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

"unknown error" message when trying to download apps on my iPod touch

Today Ive been trying to download multiple apps but keep receiving an "unknown error" message I've tried restarting my iPod but that didn't help

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(96896)

Getting error message when trying to burn cd's

hi i am getting a error message when trying to put certain cd's on i-tunes :
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
VIA Technologies, Inc. VT8366A-8233
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-01 13:35:51.
Video Display Information:
NVIDIA GeForce4 MX 440 (Microsoft Corporation)
** CD/DVD Drive Tests **
UpperFilters: GEARAspiWDM (2.0.6.1),
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
please could you help

Thanks for replying. I went to the store and bought CD's and DVD's of different brands, many of which I have used in the past. All but a couple of them worked. Maxell, Memorex, Verbatim and Sony did not work.
After several long discussions with AppleCare and some tests, they finally determined that the Superdrive needs to be replaced. So, I'm off to the Apple Store.
Thanks again!

Get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error Messages when trying to install, uninstall or run iTunes 9

I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate!

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

System error message when trying to preview catalog

Hi there, we are putting together an e-commerce site, and continually get System Error Messages when trying to open the catalog
http://shoprachbjewelry.businesscatalyst.com/black-lemon-collection
An Error Occurred
An error occurred processing your last request.
Please go back and try again.

Now my products are mising under the catagory.
http://shoprachbjewelry.businesscatalyst.com/black-lemon-collection/Bracelets

Error message when trying to play the Youtube video only on Firefox. Is it about regulations or matter of Youtube?

Ever since Youtube "change casting" (about 6 weeks ago), i can't see anymore a Youtube video even amid other sites or bloggs, with browzer mozilla firefox only (the others do it!!) because all the time sent me an error message when trying to play it. I have downloaded every latest versions of Java, Flash player, Sokwave flash player and i uninstall and reinstall all of them plus the plug ins of Firefox and the Firefox (at the end) when i put the last version 9.1 .I have this problem from updating the v8.0 when mozilla team turn off my java plug in as old (and so many others) but there isn't any new version and i can't uninstall it!.
Please give me a comprehensive answer to every possible direction. Thank you!

option-click the video track you want to adjust and drag away or trim away. The audio tracks will remian in place

Error message when trying to use config editor

I received the following error message when trying to deploy the changes to the device:
CEDT0031: no command is available to download for the device X.X.X.X. REmove the device from the job and try again.

You can't do that. Instead, just remove "aaa new-model" from the config then try to deploy it. Alternatively, you can try "merge mode," but that will send the whole config back to the device.

Error message when trying to upload a site to FTP

Keep getting this error message when trying to upload a site to FTP: Error creating folder //images. Click Resume to try again. If this problem persists, try again later.
Tried again for several days - same issue. I'm new to MUSE......help?

Hi Islanddawn,
While uploading to ftp if you are putting a '/' in the root directory, then please remove it and try again.
Regards,
Akshay

HT204053 I am getting an error message when trying to sign into my icloud. Help

Why do Iget an error message when trying to sign in my icloud? Can you also tell me how to combinned my icloud accounts?

If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup. If you restored the entire backup you should recover them.

Error message when trying to put whole cd on ipod

Similar Messages

Maybe you are looking for