Error message when trying to re-burn in a DVD-RW

Hi guys,
Everytime I try to re-burn in a dvd-rw shows the following error...
The drive reported an error:
Sense Key: HARDWARE ERROR
Sense Code: 0x03
I press ok and then the next error:
The drive reported an error:
Sense Key: MEDIUM ERROR
Sense Code: 0x57
UNABLE TO RECOVER TABLE-OF-CONTENTS
I press ok again and says:
The disck failed to be written
It only happens when I reburn the dvd-rw, but works perfect the first time I burn de dvd-rw.
My MacBook has Matshita DVD-R UJ-857D
Anyone can help me???
Best rewards

Just a suggestion but I have found on WIn 7 that showing a pdf in the
Preview view can make win think the file is open and locked for editing. The
little icon on the taskbar makes it easier to turn the preview on and off. I
always check my open explorer windows now when I get messages like that and
it usually clears it up. Hope it works foryou.
Jean Notte
[email protected]

Similar Messages

Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

Hi! Hoping someone might be able to help with an odd problem. I haven't found anything in the forums or the web that match my symptoms.
I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that. I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop. I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements. To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project). This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD. But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message. I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
I typically build both DVD and Blu-Ray images from the same material in the same project. I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built). And as I mentioned before, this is the first project on which I've even seen this layer break message.
Any suggestions would be greatly appreciated! I'd rather not recreate the project from scratch, but I'm worried that I may have to.
Thanks
Jon

The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
Be sure you "run as administrator" for dual layer projects.
Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
Also see these posts:
Neil Wilkes
http://forums.adobe.com/message/3466255#3466255
Neil Wilkes
http://forums.adobe.com/message/4054265#4054265
Neil Wilkes
http://forums.adobe.com/message/4054269#4054269
Jon Geddes
http://forums.adobe.com/message/4002647#4002647
shuchi shrivastava
http://forums.adobe.com/message/3905911#3905911
Jon Geddes and Neil Wilkes
http://forums.adobe.com/message/4003221#4003221

Error message when I try to burn CDs or DVDs

A couple of days ago my Super Drive was working great. Now I'm trying to burn a data disk for a project that I am working on and I get the following error message: "The Disc could not be used because the disc drive is not supported (error code 0x80020025)"
I have tried closing out of all other programs, using a DVD instead of a CD. Re-trying. The only thing that is different is that my software update ran a number of updates yesterday. Anybody else experiencing this?

*To repair permissions:*
Save and/or quit your applications & doucuments
Go to Applications>Utilities Folder
Click Disk Utility
Click the Volumn (HD) that you want to check.
Click the Repair Disk Permissions button. (Don't worry about verifying)
At the bottom of window when the repairs have finished, you will see the “most important thing”:
Permission Repairs Complete
The previliges have been repaired or completed on the selected volumn.
Restart your computer (Optional).
**Same directions are also in the OS Mac Help Menu.**
http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature
TIP-You should Repair Permissions & restart:
After installing and/or updating an OS (Operating System).
After installing software.
*After burning sessions*
==================
Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand.
Make sure the DVDs are not dirty, smudged and/or scratched.
http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.

Error message when trying to export audio file to DVD

I recorded an interview on a portable voice recorder and transferred the data into Garage Band by connection of a cable connected to the headphone of the device to the speaker input in the Mac. Garage Band took the audio file. It is 1.5 GB. I did some minor editing and wanted to save the file onto a DVD. When I selected "share" to export song to the DVD, an error message came up stating that the file was over 2 GB, which it wasn't. The file was then broken in two and one part was "shared", but the same error message came up. I took the computer to the Apple store for the Genus to help me with, but he had the same problem. The only way that he was able to save the audio file to a DVD was to select the file and place the file on a blank DVD. However, it can only be listened on a computer with Garage Band. I intend to use my voice recorder again to interview people. How can I input the audio file in the Mac and have it saved on a DVD to be played on multiple devices?

Hi ,
Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
What software version are you using?
Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
I would also like to know what OS do you work on ?
Is it happening with all kinds of PDF you are trying to convert or any specific one?
Please update me with above mentioned details so that we can assist you further .
Regards
Sukrit Dhingra

Bit Rate Too High error message when I try to burn 3 minute DVD

I imported a Quicktime Mov from FCP, and when I try to burn to DVD, I get this message.
This has me worried, becuase this 3 minute part is only 1/3 of the whole piece that I am trying to run as a test to check contrast, color balance etc.
I'm not sure what the bit rate is, how to change it or what to change it to.
I don't know if I need to do this in FCP or in DVDSP.
Any help would be appreciated.
J.

http://dvdstepbystep.com/faqs_3.php
Then
http://dvdstepbystep.com/fasttrackover.php to A.Pack Dolby the audio (when you scroll to the bottom there is a link to a movie showing all the steps, about 1 minute or so in you will see Compressor, you can download and scroll to that pint to bypass the Final Cut section)
And make sure to compress the movie outside of DVD SP in Compressor
Basically there is only so high the bitrate can go, regardless of running time of video. If you use one of the presets in Compressor you should be okay as long as you use the A.Pack/AC3 and not the audio

Lenovo G50-30 - "No Bootable Device" error message when trying to install windows 7 via DVD-ROM.

Hi all, Recently purchased a Lenovo G50-30 as a birthday present. After recieving the laptop, I tried putting a fresh install of Windows 7 64 Bit onto it. After changing the BIOS settings to allow legacy booting from the DVD drive and changing OS Settings to Win 7, I noticed I was getting an error reading "No Bottable Device -- Insert boot disk and press any key". After googling for a few hours on how to fix this I am still stumped and nothing seems to work. Has anyone had a similar issue or would know how to fix this?

Hi omegafeggy,
Welcome to Lenovo Community Forums!
Im kind of confused with the sequence.
Have you installed Windows 7 first then change the BIOS or You changed the BIOS first then Load Windows 7.
Thanks
Solid Cruver

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Getting Error message when trying to burn disk

I keep getting an error message when I try to burn
my IDVD theme project t disk. I checked the path
and all the videos appear to be there. Can you help me?

Hello, cinemann,
Welcome to the discussions.
+Can you help me?+ Maybe....probably....but you need to give more information about your project.
What are you trying to burn? Movies, photos? From where? iMovie, iPhoto? What versions are you using?
What exactly is the error message? At what point do you get the error message?
What is the 'path' that you checked?
What OS are you using? How much free drive space?
Once you provide more specific information, we can address your problems.

Getting error message when trying to burn cd's

hi i am getting a error message when trying to put certain cd's on i-tunes :
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
VIA Technologies, Inc. VT8366A-8233
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2007-12-01 13:35:51.
Video Display Information:
NVIDIA GeForce4 MX 440 (Microsoft Corporation)
** CD/DVD Drive Tests **
UpperFilters: GEARAspiWDM (2.0.6.1),
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
Audio CD in drive.
Found 4 songs on CD, playing time 20:08 on Audio CD.
Track 1, start time 00:02:33
Track 2, start time 04:00:35
Track 3, start time 09:01:05
Track 4, start time 14:49:05
Audio CD reading failed. Error Code: 1117 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
please could you help

Thanks for replying. I went to the store and bought CD's and DVD's of different brands, many of which I have used in the past. All but a couple of them worked. Maxell, Memorex, Verbatim and Sony did not work.
After several long discussions with AppleCare and some tests, they finally determined that the Superdrive needs to be replaced. So, I'm off to the Apple Store.
Thanks again!

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

HT204053 I am getting an error message when trying to sign into my icloud. Help

Why do Iget an error message when trying to sign in my icloud? Can you also tell me how to combinned my icloud accounts?

If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup. If you restored the entire backup you should recover them.

Error Messages when trying to install, uninstall or run iTunes 9

I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate!

Keep getting error message when trying to sign in to make a Genius Bar Reservation

Keep getting error message when trying to sign in to make a Genius Bar Reservation

Make the reservation by phone.

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Error message when trying to re-burn in a DVD-RW

Similar Messages

Maybe you are looking for