Error message when trying to salve pages or numbers documents

All of a sudden i get the following message when trying to save newly created pages or numbers documents into my documents folder
"The file “Untitled.numbers-tef” couldn’t be opened". THis is for doocuments created from scratch.
Can anyone please help?
I'm relatively new to new to the iMac and OS so not sure if something has been set up incorrectly - but it's been working OK for approx 3 months.
Any help greatly appreciated.

I spoke too soon. I began a new movie and imported
photo clips, which rendered just fine. However, I
can drag transitions in between the photos, but they
simply will not render. Everything was just swell
until yesterday afternoon when I changed the length
of the clips so that there would be enough room for
the transition. I tried to do multiple clips at the
same time, but they never rendered. It was then when
I was unable to add any more transitions.
Aha! That may be different problem. There's a bug in iMovie that makes it impossible to update image clips after you empty the iMovie trash. If you imported the image with the Ken Burns checkbox ON, the bug can affect you later.
It's possible, I suppose, that this bug not only prevented you from updating the clips to a new duration, but made it impossible to add the transition to the clips.
After importing your images with the Ken Burns checkbox on, you might try dragging the source image out of the iMovie trash, described here:
http://discussions.apple.com/thread.jspa?messageID=2139814&#2139814
Karl

Similar Messages

I get an error message when trying to convert to a word document

i get an error message when trying to convert to a word document

Its with the ExportPDF online service.
This is a snip of what it looks like:

Error message when trying to open pages

I'm having trouble opening new or existing documents using pages. I get the error message, "pages cannot be opened because of a problem. Check with the developer to make sure pages works with this version of Mac OS x. I've never had this problem before and it's been working since I purchased my IMAC back in 2010. Other programs for Iwork are working fine..Numbers 09 and Keynote 09. I tried reinstalling the software several times, restarting my computer and still no luck.. Any suggestions?

You didn't save the iWork trial.dmg somewhere by any chance?
You have not move enough parts of iWork over to the new computer. There are files in
Users > your name > Library > Application support > iWork. Get the iWork folder
MacHD > Library > Application Support > iWork '09. Get the folder
To get into the users Library you have to on Mountain Lion in the Finder click on Go in the menu while pressing down the Option key.

Get error message when trying to display page or site in any browser...

Problem signature:   Problem Event Name:    APPCRASH   Application Name:    Muse.exe   Application Version:    2014.3.0.1176   Application Timestamp:    54d3f16d   Fault Module Name:    KERNELBASE.dll   Fault Module Version:    6.3.9600.17278   Fault Module Timestamp:    53eebf2e   Exception Code:    e06d7363   Exception Offset:    000000000000606c   OS Version:    6.3.9600.2.0.0.768.101   Locale ID:    1033   Additional Information 1:    080d   Additional Information 2:    080d0c64b18d2bb1ec1c109126d25603   Additional Information 3:    275d   Additional Information 4:    275d225a38d8a72fda5bf2e009a8f64a Read our privacy statement online:   http://go.microsoft.com/fwlink/?linkid=280262 If the online privacy statement is not available, please read our privacy statement offline:   C:\WINDOWS\system32\en-US\erofflps.txt

I updated everything and I just got this message. It will open a newer one page site though so it must be something to do with the file and update.
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Muse.exe
Application Version:    2014.3.1.44
Application Timestamp:    54f60cd9
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.3.9600.17415
Fault Module Timestamp:    54505737
Exception Code:    e06d7363
Exception Offset:    0000000000008b9c
OS Version:    6.3.9600.2.0.0.768.101
Locale ID:    1033
Additional Information 1:    be34
Additional Information 2:    be344a1e5b2a1d781f0e297c84d76424
Additional Information 3:    5f58
Additional Information 4:    5f58c6cd87258caa3d36810292b8639b
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=280262
If the online privacy statement is not available, please read our privacy statement offline:
C:\WINDOWS\system32\en-US\erofflps.txt

I get an error message when trying to download apps from the app store. "safari can not open the page because the address is invalid". Please help!!

i get an error message when trying to download apps from the app store. "Safari can not oprn the page because the address is invalid"

You can't use Safari to download iPad apps. Only use iTunes/App Store.
 Cheers, Tom

Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

Error Message When Trying To Upload To Itunes

getting the following error message when trying to upload ibooks author file to itunes:
ERROR ITMS-9000: "OPS/glossary10.xhtml(3): 'g-653A7486-5795-43F4-B413-78C74BAF3E1A': fragment identifier is not defined in 'OPS/content2.xhtml'" at Book (MZItmspBookPackage)
any suggestions? thanks so much!

Bob - I'm basing this answer on my epub, not my iAuthor experience. When I get an odd error message like that, it usually means I have a graphic lingering about that is not not actually used. Here's how I would go about locating it in iBooks Author: First I would turn on Show Layout Boundaries and Show Invisibles in the View menu. Then starting at the beginning, I would go page by page – clicking on the page – and doing a Select All (Command-A). If an unused item appears, I would delete it. Then when you are satisfied, re-upload the file.
As I say, this is speculation based on my epub experience, so take it for what you think it's worth. Cheers. - Fabe

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Why am I getting an error message when trying to use a template?

Why am I getting an error message when trying to use a Pages template?

You are getting an error message because there is an error.
Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
Regards,
Barry

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

HT201318 I keep getting an error message when trying to purchase asdditional icloud storage. All information is up to date.

I get an error message when trying to purchase addtional icloud storage. All of my credit card and account information is up to date.

This behavior was described here many times.
Apple delivered a technote about that.
Go to my public BOX (address below)
Download :
public_YK›
for_iWork'09›
other_iWork'09 items ›
uninstall iWork '09.zip
Expand the archive then run the script.
After that, reinstall the application (or the entire package)
If you bought Pages thru the Mac App Store, there is no need to pay one more time.
Yvan KOENIG (VALLAURIS, France) jeudi 26 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Getting error message when trying to display error messages on a ProfilePage

Hi All,
I'm getting following error message when trying to display error on a Profile page.
On page i'm seeing this:
     org.apache.jasper.JasperException: java.lang.IllegalStateException: getOutputStream() has already been called for this response
          org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:515)
          org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:405)
In condole, i'm seeing this:
     18:23:00,206 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
          java.lang.IllegalStateException: getOutputStream() has already been called for this response
             at org.apache.catalina.connector.Response.getWriter(Response.java:621)
             at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)
Please let me know what could be the reason.
Thanks,
Vishnu

HI David And Nitin,
Here is the code using which i'm trying to display the error messages on registration page, but this code fragment is outside registration form will that cause any problem?
<dsp:droplet name="Switch">
<dsp:param name="value" bean="ProfileFormHandler.formError"/>
<dsp:oparam name="true">
<table>
<dsp:droplet name="ProfileErrorMessageForEach">
<dsp:param name="exceptions" bean="ProfileFormHandler.formExceptions"/>
<dsp:oparam name="output">
<tr style="color: red">
<td><dsp:valueof param="message"></dsp:valueof></td>
</tr>
</dsp:oparam>
</dsp:droplet>
</table>
</dsp:oparam>
</dsp:droplet>
Thanks,
Vishnu

I continue to get an error message when trying to add Header

I continue to get an error message when trying to add Header & Footer. Therefore I am unable to add page numbers to my pdf. Help!!

Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

I get this error message when trying to open a catalog.

I get this error message when trying to open a catalog. "error message: unexpected error opening catalog"

Hi Ian.
Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
Best wishes,
Magne
6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
Re: Help! Lightroom freezes after installing.
created by Ian Lyons in Photoshop Lightroom - View the full discussion
Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when trying to salve pages or numbers documents

Similar Messages

Maybe you are looking for