Error message when trying to upgrade to 9.0

every time i try to upgrade to the new version for windows vista it always says "invalid drive:F" can someone please tell me what that means?

The installation file got corrupted during the backup.
Just redownload it and you should be all set.

Similar Messages

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Keep Getting Error Message When Trying to Upgrade

I have tried to upgrade several times it goes all the way through and then it gives an error message after trying to upgrade quicktime error message 2378

+error message 2378+
That typically indicates a problem with your VBScript. See the following troubleshooting article:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)
(The Vista instructions are down at the bottom of the document.)

Latest itunes error message when trying to upgrade

I keep getting an error message when I try and upgrade my itunes. It says that the data was corrupted . I have tried several times. All the same message

I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

Error message when trying to upgrade from 10.3.9 to Tiger 10.4.5

Hope somebody can help. I'm fairly recent to macs as have always built and used pcs. Am having trouble upgrading from current pantherOS to Tiger. Bought emac with upgrade disc provided by seller. Disc was gray labelled emac. Installation went fine and everything was proceeding to point it finished writing files, configuring installation, and running installer scripts and then it quit with message: error installing software. Try reinstalling.
Tried reinstallation and same thing occurred. then Tried complete erase and new installation. Same error message.
Came to discussion group searching for something I might be doing wrong. Decided maybe disc was wrong even though it specified emac which is what I am using. Bought generic install disc that would install on any G3/4/5 with minimum specs per hardware which system met.Installation proceeded as it was going to install same as emac disc. This is normal full install disc for generic installation.
All installations screens came up and installation proceeded to same point as before and then quit with same message: error installing software/ Try reinstalling.
Have removed ram to original 256MB and tried. No luck. I am using external DVD for installation of DVD and wonder if this is problem but in the forums external DVD seems to work alright. Can reinstall old Panther OS without any problem
Ran hardware test and everything checked okay.
Should I just forget about upgrading and use 10.3.9 but would really like to know what is wrong. thanks. Rick

Welcome to Apple Discussions!
See my FAQ:
http://www.macmaps.com/upgradefaq.html
and then consider the instructions here to Archive and Install:
http://docs.info.apple.com/article.html?artnum=301270

Error message when trying to upgrade iphone 4 to ios 6

Connect to laptop (windows) and the sync starts backs everything up then error occurs when restoring software when upgrading to ios 6

When it tries to restore just says error in restoring software when i check for more info no code appears has happened twice

IPod Updates with error message when trying to upgrade iPod software

We now have 3 iPods (2 3rd generation, 1 2nd generation), which are sync'd with a single iMac (running Leopard) with different checked play lists. When either of the 2 3rd generation iPods are attached, it indicates an upgrade is available (v1.1) but when selected indicates "problem downloading the iPod software for the iPod x. You do not have enough access privileges for this operation"
What configuration change is needed?
Thanks in advance, Neil

When it tries to restore just says error in restoring software when i check for more info no code appears has happened twice

Error message when trying to upgrade to the new mac os update

today in the afternoon i was updating to the new version and then i got the grey screen and i restarted like it tells me in the message and then i had some serious error and the imac wasnt loading so i called support and he helped me reinstall the os so now i reinstalled it and i want to update to 10.4.8(bcuz the cd installs 10.4.4) but it tells me this error:
"installing this software requires 607MB of space"
and i cant press continue and i have 184GB free. why is this guys?
and on some other programs i try to install it tells me that error that i need to have mac os 10.3.9 and it just quits.. i just also tried to install divx and it tells me it requires mac os 10.3.9 or later and that it cant be installed on my machine(i have 10.4.4), well like 1 hour ago i reinstalled my os without any format because i had a trouble with my hardrive, everything works good now but im having this issue here .. do i need to update some information somwhere or osmething or run some tool? (i updated file permisions but still same)
btw where do i check which version of macos i have just to be sure?
please help me guys

777iPod,
This is a good guide to help with kernel panics: http://www.thexlab.com/faqs/kernelpanics.html
I think it's Support policy, even prior to an archive and install, to have a user first remove any third party RAM and third party devices to verify that none of those are causing the kernel panics. We weren't told if that was done, but I've assumed so. If third party RAM was allowed to remain installed, it is not unusual for it to be the source of kernel panics.
I don't know if it's part of the Support checklist, but when making changes like that, or when replacing hardware or software in general, I have always followed that up with a PRAM reset. I realize that usually Macs will recognize (plug & play) such changes, but my experience has been that it's better to just do the PRAM reset, or else be prepared to shut down and then do a fresh startup so that the system can do its usual self-testing that is performed during startup.
If it was an archive and install that Support recommended to jmanwee, and if it did not resolve the issue, I believe their next suggestion will be to erase and install.
Once third party devices and software have been eliminated as the potential cause of the kernel panics, I imagine Support will have no problem arranging for hardware repairs.
I'm probably overlooking something, but referring to the above link should help anyone get their situation resolved.

Error message when trying to upgrade Itunes

I was able to download the new version of Itunes to my computer but when I went to install it I got an error messaeg that said installation failed because the itunessetup.exe was not a valid win32 application. How do I get around that in order to upgrade my itunes?

The installation file got corrupted during the backup.
Just redownload it and you should be all set.

Get error message when trying a upgrade to Vista on Satellite Pro U200

Hi,
When I upgraded my Satellite Pro U200 to Vista (Using original CDs from Toshiba), I could not install Config Free program. When I want to install it, I receive the message "Installation image is not corrcet" Any ideas to solve this problem??
Thank you

Hi,
maybe you should download the configfree again for your machine from here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Just download it and try to install it. I cannot imagine that it wont work, Ive upgraded my A100 some time ago and everything works great.
Btw. I downloaded all the stuff from the link above.
Please give some feedback
Greetings

I get the Code 50 error message when trying to upgrade Creative Cloud on my laptop

I am unable to upgrade Creative Cloud on my laptop although everything works fine on my office PC. What can I do????

It is better to uninstall and reinstall the updated version App :
You may also refer below link :
Error: "Failed to install" | Creative Cloud Desktop

I get this error message when trying to upgrade to the latest version of Firefox, Setup has caused and error in SETUP.EXE.

Upgrading from Firefox version 2.0.0.20 to the latest version, 3.6.8.
I using Windows ME.

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
http://www.mozilla.com/en-US/firefox/system-requirements.html
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

I recently upgraded to Mac OS X. I hadn't try to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

Error message when trying to upgrade to 9.0

Similar Messages

Maybe you are looking for