Error message when updating to IOS5.0.1, now Iphone completely frozen

I tried to update my iPhone 4 to IOS 5.0.1 earlier, it did the whole backing up iphone thing, then preparing to restore, then an error message came up saying iphone cannot be updated. I clicked OK then nothing happened for about 15 minutes so I disconnected the phone from the computer. It is now frozen on the screen that has a usb cable and the iTunes logo, i have tried to reset it using the home button and lock button but it gets to the apple logo then screen goes black and nothing happens. have tried charging it but the battery was full before this happened and it is still just locked on the iTunes and usb screen. any help would be greatly appreciated!

I am having the exact same problem (or very similar) with my iPhone4.
Came home, plugged it in and was prompted to update to iOS 5.01.
Midway through the iPhone restarted and an error occured, which I hit ok and more information.
It was frozen on the apple logo for 20-30 minutes, so I disconnected it and tried to reset it. Only thing that worked is the Power + Home button for 10 seconds.
So then I plug back in and do the Restore.... only...
I get the message:
iPhone "iPhone" could not be restored. An unknown error occurred (1603).
[OKAY] [MORE INFORMATION]
The screen is now frozen on the apple logo just like before.
Please help?

Similar Messages

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

I am getting an un expected error message when updating the setting to "extend network". Is there an obvious setting I may be missing? Cisco router being used.

If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
It is extremely unlikely that this will work with a Cisco router.
If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

I recieved an error message when updating to itunes version 11.1.3.8. Says itunes has attempted to load C runtime library incorrectly. Version 11.1.3.8 works. How do I correct?

Hi there MRDLS,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

[SOLVED] Strange error message when updating Pacman

I get a following error message when updating pacman and doing system upgrades:
[mike@goat ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
looking for inter-conflicts...
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
error: could not open file /var/lib/pacman/local/openssl-0.9.8l-1/depends: No such file or directory
I tried running pacman -Syyu, but that did not seem to solve the problem. There is /var/lib/pacman/local/openssl-0.9.8l-1/
directory but it is empty. When running pacman -S openssl, I get the above error message as well but it spans for hundreds of buffer lines. In the end I end up with this:
openssl: /usr/share/man/man3/ssl.3.gz exists in filesystem
openssl: /usr/share/man/man3/ui.3.gz exists in filesystem
openssl: /usr/share/man/man3/ui_compat.3.gz exists in filesystem
openssl: /usr/share/man/man3/x509.3.gz exists in filesystem
openssl: /usr/share/man/man5/config.5.gz exists in filesystem
openssl: /usr/share/man/man5/x509v3_config.5.gz exists in filesystem
openssl: /usr/share/man/man7/des_modes.7.gz exists in filesystem
Errors occurred, no packages were upgraded.
[mike@goat ~]$
Anybody have any insight?
Thanks,
maschinetheist
Last edited by maschinetheist (2010-03-02 17:18:42)

Bregol wrote:
Sounds to me like openssl is installed on your system but the info on it is now missing from the local pacman database (/var/lib/pacman/local). In other words, pacman forgot that you installed it. So in your second clip of code, pacman is complaining that files belonging to openssl exist in your filesystem, since you do have it installed but it no longer knows that.
Don't know if this is the proper way to fix it, but I imagine forcing a reinstall of openssl (pacman -Sf openssl) should get pacman to reinstall openssl so that it knows it is installed.
Bregol,
pacman -Sf openssl
seemed to have fixed it. Did not know of the force reinstall option. The necessary directories in /var/lib/pacman/local/openssl have been created.
Thanks,

HT4972 why am i getting an error -48 when updating to iOS5 on my iPad

why am i getting an error -48 when updating to iOS5 on my iPad and how do I fix it? Apple's suggestion does not work.

I'm sorry but I don't what the error means other than the ipsw file is bad - which is what it says in the article and it usually relates to something in the specific user account.
You did try creating a new user account on the Mac and tried updating that way? You have no security software running on the Mac?
The app that was downloaded using your son's ID should not affect the update to the best of my knowledge.
jparrsies wrote:
On a related question, I would not care so much if i could make a good backup and not have the upgrade overwrite this backup. Once I start the upgrade, iTunes thinks I've never done a successful backup of the iPad and yet I've done at least a dozen over time.
I'm not sure I understand what you mean here by "iTunes thinks I've never done a successful backup". Are you trying to do a manual backup?

Recently I started receiving error messages when I try to sync either my iphone or ipad...Help! ( The Ipad is a new purchase)

Recently I started receiving error messages when I try to sync either my iphone or ipad...Help! ( The Ipad is a new purchase and software is up to date.)

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503http://support.apple.com/kb/ts1503
 Cheers, Tom

HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS

TS3219 Is anyone receiving a "unknown error" message when updating/getting new apps?

Before and after installing the new update I started receiving an "unknown error" message when trying to update apps. I changed my password thinking that was it but I am still getting the error message.

Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
Settings>Store>Apple ID - tap your ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sign in again -Settings>Store>Apple ID - sign in.
If that doesn't work either, reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Error message when updating Sales Orders

Hi Experts
Following an issue over the weekend when I was forced to perform a hard reset we are now experiencing error message when trying to update some sales orders.
This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
it is not happening on all orders - i think only ones which were on the system prior to the reset.
We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
Event Type:     Error
Event Source:     B1SynchService
Event Category:     None
Event ID:     0
Date:          29/06/2009
Time:          13:42:38
User:          N/A
Computer:     SQL01
Description:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
   at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
   at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
   at NetPoint.SynchSBO.Synch.SetCompany()
   at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
   at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
   at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
   at NetPoint.SynchService.NPSynchService.Main(String[] args)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
Regards
Jon

Dear Johnny,
the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
Hope my reply helps you to solve the issue.
Regards,
Wesley Honorato

Keep getting an error message when updating 10.6.8

keep getting an error message when doing a software update for 10.6.8

I've tried both ways but it does the same thing. I have iTunes v 10.3.1.
I get an error message before I try to install iTunes:
iTunes can’t verify the identity of the server “ax.itunes.apple.com”. The certificate for this server is invalid. You might be connecting to a server that is pretending to be “ax.itunes.apple.com”, which could put your confidential information at risk. Would you like to connect to the server anyway?

Error messages when updating

Keep getting error messages when trying to update

Anybody ever get an error message like this when trying to update your vault?

Error Message when updating iPod Touch

I keep getting an error message when trying to update my daughter's iPod Touch to version 4.2.X. I'm using Windows7. The error message says something like "An error occured while backing up this iPod (-35).
Does anybody know what is causing this error message and what I can do to ensure I can download the latest update?

Welcome to the discussions,
did you check your security software settings? http://support.apple.com/kb/TS3125
also try to use another USB cable/port.
More info on error messages here: http://support.apple.com/kb/TS1275

HT4623 keep getting a generic error message when updating

I keep getting a generic error message when trying to update my iphone3gs. I have done it while connected to the computer and through wifi. When I am connected to the computer it stated, check your connectivity as the update timed out (I did a check and everything worked fine) when I tried through wifi, it just said it failed to update. Um, no help there.

I received this email from Apple and this corrected the problem for me... I only had to reset the iTunes cache
1) Open iTunes
2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
3) In the Preferences menu, click the Advanced tab
4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

Getting Error messages when updating my vaults.

I got about 26 of these error messages when I am trying to update my Vault! I have no clue why I am getting them.
ERROR MESSAGE:
Couldn't create /Volumes/MASTERS/Chuck's Photography Vault 1.apvault/Library/Nature.approject/2010-04-10 @ 09:38:50 PM - 3.apimportgroup/DSC_1509/Info.apmaster

Anybody ever get an error message like this when trying to update your vault?

Error message when updating to IOS5.0.1, now Iphone completely frozen

Similar Messages

Maybe you are looking for