Error Message When Upgrading Firmware for BEFW114S

To all,
I have a BEFW114S with a firmware 1.42.7 which I wanted to upgrade to 1.52.02 However, I got the following error message when I tried update the firmware:
Message: Warning! Upgrade File Pattern Error
Any ideas of what might be causing this.
Thanks.
Babylon5

Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

Similar Messages

Error message when upgrading to 7.3.2.6

I just (attempted to) upgrade to 7.3.2.6 (and after the install, it all seems OK for now) - but during the install, I got a "files in use" error message window, mentioning that Windows Explorer was running (Process Id: 432), giving me the option to Retry, Ignore or Exit.
I tried all options - I even Exited and rebooted - and re-upgraded after that, but keep getting the same error... So far iTunes seems to have upgraded and appears to be working - but could the install have missed some components now - and therefore should I expect trouble ahead?

Yes, i had the same error message after upgrading to 7.3.
I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
Search this forum - i hope you find a solution.

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Mac OS X keep getting error message when extracting files for trail version of CS5 master suite.

Mac OS X keep getting error message when extracting files foUsingr trail version of CS5 master suite. I deleted all Adobe files and tried again several time and keep getting the same results.

What error message are you receiving? What version of Mac OS do you have installed?

Error message when upgrading to the latest itunes

i've been attempting to upgrade my old itunes to the latest one, as i have a new ipod which needs the latest progrm to run. it seems to download alright but when i click 'run' at the end of the install it gives the error message -
invalid drive : F:/
does anyone have any ideas how to make it download? or if not is there a way to make my new ipod run on my older itunes system, thanks.

It is possible that the registry setting for one of your special folders is pointing at a drive that is not available.
Try downloading TweakUI form Microsoft. This lets you set the location of special folders:
It is one of the download here:
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
This Apple article about something else tells you how to use it:
http://docs.info.apple.com/article.html?artnum=302398
Check that My Documents, My Music and My Pictures are not set to drive f:.
Surpisingly My Pictures is one that is often wrong.

Error message when upgrading

I keep getting an error message "there was an error opening the database for the library "/pictures/aperture library.aplibrary". I have deleted some preference items per other posts and apple online articles but to no avail. The upgrade stops working on step 7 and then I get the warning message listed above. Thanks in advance for any help anyone can provide. I cannot do a rebuild because I can't access that screen.

Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

Error message when upgrading to SCOM 2012R2 CU2

Hi!
I get this message when running the SQL script "update_rollup_mom_db.sql" which is required in the CU2 upgrade. I've tried running it multiple times. The message is attached.
I've also tried stopping all SCOM services on the Management Servers and the Correlation engine, but still the error.
What does this error mean for my SCOM installation? Is there something that doesn't work now? I try to update agents, but the console doesn't show the new versikon number

Hi,
I agree with Mai, this issue is SQL related, and hope the below two similar threads be helpful for you:
Transaction was deadlocked on lock resources with another process
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/94feae08-133e-4d76-a50f-12afb4345d15/transaction-was-deadlocked-on-lock-resources-with-another-process?forum=sqldatabaseengine
OpsMgr/SCOM : Transaction was deadlocked on lock resources with another process and has been chosen as the deadlock victim
http://social.msdn.microsoft.com/Forums/en-US/595796fc-e778-4e2a-afff-3b5ec53fcc1e/opsmgrscom-transaction-was-deadlocked-on-lock-resources-with-another-process-and-has-been-chosen?forum=sqldatabaseengine
Regards,
Yan Li
Regards, Yan Li

Error message when upgrading to Tiger

Hello,
I have an iMac G5 running 10.3.9 and I'm finally getting around to upgrading it to tiger. I've installed everything in software update, so I should be completely up to date, and I have all the RAM and hard drive space the apple support page says I need. Whenever I restart my computer with the system install CD, however, the error message appears: "ALERT: This software cannot be installed on this computer" and I can't get any further than that. The very latest firmware updates are for computer running system 9, aren't they? I can't think of why I'm getting this error.

This software cannot be installed on this computer
Rosasharn, welcome, the computer is questioning the validity of your CD. Is it a full retail version of Tiger? Where did you get the CD? What color is the CD? And what does it say?
Joe
Mac Pro 2.66 Ghz Mac OS X (10.4.10) Users (RAID 0), PM G4 (10.3.9, PM 6500 (10.2.8)

Error messages when calling RSDRI_INFOPROV_READ for more than one time

Hello all,
I need to write a cube, however, before I do this I need to check whether there are already data in the target cube for a certain accounting period. This I do by reading the cube via FM RSDRI_INFOPROV_READ. The following coding is called from a running program after pushing a button on the screen.
<i>* clear internal tables.
      CLEAR gt_range.
      CLEAR gt_sfc.
*fill internal tables
      CLEAR ls_sfc.
      ls_sfc-chanm    = '0FISCPER'.
      ls_sfc-chaalias = '0FISCPER'.
      ls_sfc-orderby = 0.
      INSERT ls_sfc INTO TABLE gt_sfc.
      CLEAR ls_range.
      ls_range-chanm    = '0FISCPER'.
      ls_range-sign     = rs_c_range_sign-including.
      ls_range-compop   = rs_c_range_opt-equal.
      ls_range-low      = '2007001'.
      APPEND ls_range TO gt_range.
here I do not know what exactly to do with this flag
      lf_first_call = abap_true.
      CALL FUNCTION 'RSDRI_INFOPROV_READ'
        EXPORTING
          i_infoprov             = 'T01'
          i_th_sfc               = gt_sfc
          i_th_sfk               = gt_sfk
          i_t_range              = gt_range
          i_packagesize          = 1
        IMPORTING
          e_t_data               = lt_rd_cube
          e_end_of_data          = lf_eod
        CHANGING
          c_first_call           = lf_first_call
        EXCEPTIONS
          illegal_input          = 1
          illegal_input_sfc      = 2
          illegal_input_sfk      = 3
          illegal_input_range    = 4
          illegal_input_tablesel = 5
          no_authorization       = 6
          illegal_download       = 7
          illegal_tablename      = 8
          trans_no_write_mode    = 9
          inherited_error        = 10
          x_message              = 11
          OTHERS                 = 12.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      lf_eod = abap_false.
      IF NOT lt_rd_cube IS INITIAL.
        RAISE target_data_found.
        EXIT.
      ENDIF.</i>
When testing with a period for which data already exists, it runs through quite perfectly. The return table is filled and I know that data exists and I EXIT.
However, if I press the button again (program is still running) I get an error message 'Nested call of RSDRI_INFOPROV_READ'. And this for each time I press the button.
So I thought I should clear the flag lf_first_call. After having done so I get an error message 'SQL Error'. Funny is that I get this error only every second time the Function Module is processed. Every other time it works perfectly.
How can I get rid of those error messages?
PLEASE - can anybody help me?
Many thanks in advance,
Thomas

Hi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING i_infoprov             = ....
                     i_th_sfc               = ...
                     i_th_sfk               = ...
                     i_t_range              = ...
                     i_reference_date       = ...
                     i_save_in_table        = ....
                     i_save_in_file         = ....
                     I_USE_DB_AGGREGATION   = ...
                     i_packagesize          = 100000
                     i_authority_check      = ...
          IMPORTING e_t_data               = .....
                     e_end_of_data          = end_of_data
          CHANGING   c_first_call           = first_call
          EXCEPTIONS illegal_input          = 1
                     illegal_input_sfc      = 2
                     illegal_input_sfk      = 3
                     illegal_input_range    = 4
                     illegal_input_tablesel = 5
                     no_authorization       = 6
                     ncum_not_supported     = 7
                     illegal_download       = 8
                     illegal_tablename      = 9
                     OTHERS                 = 11.
ENDWHILE.
hope this helps...
Olivier.

Error message when upgrading Acrobat 9

Why do I get error message 1402 when I try to upgrade Acrobat 9 Standard?

Hello,
Please refer http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html
-Yuvraj

"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows 7 64bit

I was promted to upgrade to the new itunes version today (11.0.2.26), but wish I never had as the previous version worked just fine!! I have been unable to install the new version and keep getting the message about there being a problem with the Windows Installer package. I tried following the instructions on this support pages on removing all Apple programs but that didn't work either!! I have Windows 7 64 bit and am close to throwing my PC out of the window!! Quicktime will not re-install correctly either...
Any suggestions will be most gratefully received

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Error Message When Leaving Review For Apps Downloaded Using a Different Country App Store

DEVICES AND SOFTWARE:
iPhone 6 Plus iOS 8.1.2, Macbook Air 11" 2013 OSX 10.10.2, iTunes 12.1.0.50
DESCRIPTION:
When attempting to leave a review for an App that has been previously downloaded or purchased using a different country store but on the same Apple ID - the user receives an error message. The issue stems from the App not being in the Purchase History of the presently associated country store as purchase history is country dependent rather than Apple ID dependent.
STEPS:
1. Login the App Store on iTunes or iOS Device using an Apple ID associated with a country.
2. Download an App for the first time using said Apple ID.
3. Change the country of said Apple ID.
4. Attempt to leave a review of the previously downloaded app.
EXPECTED RESULTS:
A user should be able to leave a review to an App he/she has previously downloaded whilst the Apple ID is associated with a different country. The App Store button should show Downloaded after the country change and the App should continue to be displayed in the Purchase history. In other words the purchase history should not be country dependent but Apple ID dependent.
ACTUAL RESULTS:
User gets an error message indicating that the app needs to be downloaded or purchased first.
NOTES:
I have tried deleting my reviews from the original country store, and yet I am still not able to leave a review. Please make the purchase history dependent on the Apple ID rather than the Country Store. If this is not possible, provide a way for users to remove to delete the purchase history from the previous country store(s) - so these apps can appear on their current country store's purchase history. Thus they would be able to leave reviews for these apps.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple. If you want to leave feedback for Apple : http://www.apple.com/feedback/itunesapp.html

Why do i keep getting error messages when upgrading my iPad OS?

I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?

seyi wrote:
I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?
My first inclination is to answer your question --- yes - something is going wrong! I'm sure more specific information will be needed to help you.
Are you getting a specific message? An error code number? Can you describe exactly what you are doing when you get the message?

Error message when Numbers asked for zero to the power of zero.

Hi,
I have recently converted my Appleworks spreadsheets to Numbers. I have a spreadsheet that performs Poisson Distribution calculations. This was no problem for AppleWorks which correctly returned the value of 1 when asked to calculate zero to the power of zero. However, Numbers '09 v 2.2 returns an error message instead. Must I reinstall OS X 10.6 and go back to AppleWorks or is there a solution?

Hugh,
It may be common for calculators to return 1 for 0^0, but it's not correct. 0^0 is an "indeterminate form".
To quote the Wikipedia page on Indeterminate Forms:
The indeterminate forms include 00, 0/0, 1∞, ∞ − ∞, ∞/∞, 0 × ∞, and ∞0.
Trapping the error and setting the result with IFERROR would be simple, but perhaps too wide a net. You should be able to test the base number for zero prior to making the calculation.
Jerry

Error message when doing settlement for Internal order

Hi,
Can someone please help me to resolve the following error:
When trying to run settlement for an internal order, following error message is generated:
Item 001 Order xxxxx budget exceeded
Message no. BP603
Diagnosis
Budget was exceeded by xxxx amount in document item 001 Order xxxxxx.
Also following points may be relevant:
- System status ISBD for Internal Order is active
- There is no PR/PO for the order, direct invoice from FI is created through tcode FB50
- Availability control: Activation Type 1, Overall field ticked in customization
- Tolerance Limits: Availability control action .... Usage 85 % - Warning message, Usage 100 % - Error message
Thanks,
Ankita

Hi Loong,
Thanks for reply.
I have already tried drilling down the report S_ALR_87013019 , however following are the only things available from the report.
1. There is a year independent overall budget for the order of 92500 amt.
2. Actual in 2009 is 7870.41 and in 2010 is 77980.24. So the total actual amt is 85850.65 overall.
3. The available budget is 6649.35. i.e Over budget minus actual utililized amounts.
Since, in the report it shows that the budget is available then I am unable to figure out why does it give error for exceeding budget by amt 50100.65 at the time of settlement.
Regards,
Ankita

Error Message When Upgrading Firmware for BEFW114S

Similar Messages

Maybe you are looking for