Error Message when uploading report but report works fine

Hello ,
I am facing a strange issue here, when i try to upload a report in Crystalreports.com using ODC there is an eeror message shown - " The Open Data URI does not appear to be valid one or the server is down.Do you want to Continue?"
When I click 'ok' the report uploads and when its run it works perfectly fine , it shows the parameters to choose and pulls the
right data.
Has anyone faced this ? and any idea why that error message appears although every report uploaded works perfectly fine?
Thankyou
dpa

Hi dpa,
The crystalreports.com server does some validation of that url to make sure it can be reached and that it returns some info to ensure it is an odc deployment.
It sounds like there is something particular about your url or odc deployment that is causing this validation to fail unnecessarily.
Could you enter a support ticket and supply the url that you are using so that we can test it out to find out what exactly the problem is?
Thanks
Steve

Similar Messages

Receiving "Unable to connect" error message for every site, but IE8 works fines

HP Pavilion , AMD Athlon X2 Dual, Core processor 3800+. 2Ghz, 1MB Ram, Windows XP Media edition 2002, Service Pack 3. Firefox Version 3.6.8
When starting Firefox, it always says "Unable to Connect". IE8 works fine.

This is normally caused by a firewall blocking Firefox, for more details see [[Firefox cannot load websites but other programs can]].

Error message when uploading- but document still uploads

Hi,
Over the past few days I've gotten an error message when uploading a document to my SharePoint site (O365/ 2013). All the error message says is "Sorry, something went wrong. An unexpected error has occurred." The correlation ID is 379ed19c-706a-1000-a3f3-e1860141685e
The strange part is that the document still uploads fine. So there's no obstruction of the workflow or anything, but something still changes in the back end.
Is this occurring to anybody else?

The process of uploading a document involves a number of steps. The upload may go fine, but fail when it tries to update metadata or check the document in. You need to track down that correlation ID in the ULS logs to get the specific step that
is failing. Here's a Blog post on how to find the error in the log.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.VHzsGTHF-6k
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

There is the error message when we run IR8A report

Hi SAP expert,
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).
I would appreciate you very much if you could advise me how to solve this problem.

Hi ,
I am facing the same error like this,
please let how did you solve this iisue ?
thakn\s

IPCC Error Message When Uploading Script

Have anyone seen this error message before? If yes, what the resolution.....
I am getting this error message when uploading a new script or add a new resource group
can not acquire ClusterMutex; nested exception is: com.cisco.config.ConfigException: Store config record - error: config request timed out
Please advise.....

Cisco have a doc on fixing Mutex lock errors:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00808254ed.shtml
Worked for me when getting the following error:
CRS Administration cannot perform any update at this time because there is an ongoing 'Cluster Mutex acquired by FileMgmt - Upload.'
Different error but might help?

Error message when uploading - need help to fix

I am getting this error message when uploading to ftp host:
﷯Error:
Error uploading file master_a-master.css. Click Resume to try again. If this problem persists, try again later.
[421 Idle timeout (600 seconds): closing control connection]
how do I fix this?? have already tried to resume,,, tried from scratch. closed program and opened again. does this each time.

Make sure you're doing everything recommended by BlackBerry:
www.blackberry.com/btsc/KB34045
If you're hitting reload and it isn't reloading the OS for you, perhaps try reloading a backup file you've created (hopefully you've done some backups).
Keep us up to date on your progress.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Error message when logging into financial reporting studio 11.1.1.3

I receive the following error message when I attempt to login in to financial reporting studio 11.1.1.3:
"You are not authorized to use this functionality. Please contact your administrator."
I'm attempting to login with the default "admin" user that appears to have been automatically provisioned with all user rights.
I see the following error message in FRClient.log (on the client):
09-14 13:48:40 ERROR ConfigResourceBundle Could not find fr_configcache.properties file
The server components (foundation, fr server, essbase) are on a linux machine and fr studio (along with the common foundation files) are installed on a windows machine.
The fr_configcache.properties file does not exist on the client but it does on the server.
Edited by: user5326851 on Sep 14, 2010 1:59 PM

I tried copying the file fr_configcache.properties to c:\hyperion\products\biplus\lib and this got rid of the error message that shows up in FRClient.log but I still receive the same authorization error message in the GUI.

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Error messages when trying to install Microsoft Works 4.0 on my Hard Drive

My internal hard drive crashed (died) with all of my applications (programs) on it. I have successfully installed back all of my applications from the original program disks with the exception of Microsoft Works Vers. 4.0c. Works will not install the original software back on my HD even though I have the original Works program floppy disks. I get the following error messages when I try to run the Installer program on the Works program floppies. 1st error message: Microsoft setup was not completed successfully. 2nd error message: Setup was unable to locate a valid setup table file and cannot proceed without one.
When the crash occurred I had my system folder running OS 9.1 on my other Internal HD so I did not have any startup issues, etc. (thankfully)
I have a gut feeling that because I still have some Works files in my system folder they may be causing the setup program from running properly.
I am hoping someone knows a work around to help me get Works installed back on my HD.

And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
Mylenium

Error Message When Uploading iMovie to Vimeo/YouTube

I also get an error message when trying to "finalize project". The loading seems to be going well and takes quite a bit of time for my 20 minute long movie. At the end of the upload I get a generic error message saying that due to an error, my file could not be uploaded.
Any suggestions? I have uploaded several movies to YouTube and Vimeo in the past without an issue. Now all of the sudden I am having trouble finalizing my project and uploading.
thanks,
Alex

Hello byronic42,
Welcome to the BlackBerry Support Community.
What happens when you attempt to upload a photo using Facebook for BlackBerry when connected to Wi-Fi? Do you receive the same error message?
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Error message when compiling oracle 11g reports

Hello Team
When we are trying to compile a oracle 11g report we are getting the below message.
"Could not read report properties"
But compile status of the report is Success and we are able to run the report in our environment.
Could you please advise us how to fix the above error message?
Thanks ,
Salaithenagan J

Hello,
How do you compile the Reports ? Do you use rwconverter.sh in ORACLE_INSTANCE/config/reports/bin ?
If yes , could you copy the content of this script in this thread ?
Regards

Error message when we print but the printer work correctly

Thanks John, Excel Job Control is in grey but unchecked, I will try the PostScript driver

Hello everyone,We have 4 Konica multifunction, 1 for each department, 4 differents model.We have 1 multifunction (Konica C253), when the users start a printing job, they have a error message that the document is not print, but 30 seconds later the print job start correctly or when the print job is stuck, another user start a job and the 2 print job start correctly.I have try to disable bidirectionnal support, i've reboot the print server (Windows 2008 standard x64), reboot the multifunction. Konica technician have replace the network card and the hard drive a few months ago.With WIreShark, i saw no communication broken, anytime a users start a job the pc and the multifunction can communicate between us.The driver install on the server is a PCL driver like the 3 others multifunction.I Have installed locally the printer on one pc this...
This topic first appeared in the Spiceworks Community

Solve error message when uploading to youtube

Does anyone know how to upload videos to youtube? I never had a problem with the Premiere Elements 11, but on Premiere Elements 12, I get an error message that is not very helpful. I've scoured every online forum I can think of for an answer and cannot locate anything useful to get over this error message.

Janaschmidt
What computer operating system is your Premiere Elements 12 running on?
How do you upload content to YouTube
a. For 12, Publish+Share/Social Websites/YouTube which preset
or
b. For 12, Publish+Share/Computer/and a choice such as AVCHD to export to file saved to the computer hard drive, followed by uploading that saved file to YouTube at the YouTube web site.
or
c. Both
How far do you get in the process? And when specifically in that process does the error appear? Have you tried "a" and "b" cited above? Does "b" work while "a" does not.
What exactly is on the Premiere Elements Timeline in the way of content and content duration? Are you over 15 minutes in content duration?
Please supply the above information and let us know if "b" as a troubleshooting tool works for you.
Thank you.
ATR

Error Message When Uploading My Site

Hey,
I am trying to upload my first iWeb website. However each time I go through the publication process (file>publish), it crashes! And I get an error message saying something like "error encountered when publishing pagename : picturename.png" and then my website is not published. But the craziest thing is that it is not on the pictures that I added that it crashes, it's on pictures that are comprised in the page model (like the stars or background.png)!!!
Any input on how to FIX this???
I would be grateful forever!!
THANKS
iBook G4 Mac OS X (10.4.4)

Four things could be going on, but it's fixable.
first.. make sure that your screen saver, and energy saver are turned off in your system preferences. iWeb had trouble with this in it's first version, but since the update it's supposed to be fixed, but I'd still do it.
second, it's been my experience that iweb is affected by bandwidth issues while uploading. If you're using your browser, uploading or downloading anything else... you'll get the error message and that one file couldn't upload. Make sure that when you click on the publish button you walk away from the computer and don't use it. This appears to be a bigger problem for us G4 users than the G5 folks. Also, it's a memory hog, so seriously, when you publish turn everything else off except your computer and iWeb and walk away. Seems to work for me.
Third... make sure your idisk is NOT loaded onto your desktop. If it starts refreshing and files are getting put there while you're uploading, iWeb will give you the dreaded error message.
Finally, just keep republishing. iWeb seems to bog down when you publish sometimes. I re-uploaded my entire website last night, including 7 video podcasts and numerous other blogs that have audio and video in them. I had to publish and publish and publish.... it took four tries, but it finally finished. It seems that it gets farther and farther along each time. Anyway... it works.
Hope this helps.
Jim
20" Imac 1ghz (lmpstd), Mini, G4 Dual 1.8(upgraded), G4 400, Powerbook,12", eMac Mac OS X (10.4.4)
20" Imac 1ghz (lmpstd), Mini, G4 Dual 1.8(upgraded), G4 400, Powerbook,12", eMac Mac OS X (10.4.4)

Error message when upload PO (DTW)

Dear All,
when i upload PO using the DTW, error message prompt out, but i cannot find any mistake in the upload files for both header and items. i have 10 records to upload, then i upload it one by one, there is no problem.
would like to know if anyone have idea of what is the meaning of the following error message? i have no idea about it and cannot search from the web.
'Internal error [-2038] occurred' Application-defined or object-defined error65171
Thank you very much!!

All 65171 errors are related to field format mismatch. If you could DTW one by one, you may have problem with RecordKey and LineNum mismatch.
Thanks,
Gordon

Error Message when uploading report but report works fine

Similar Messages

Maybe you are looking for