Error message when uploading to youtube..password incorrect?

trying to upload a video from imovie to youtube and I get an error message "username or password is incorrect". I have reset my password in youtube but still get this message. How do I clear it and reset it in imovie or quicktime?
Youtube have recently changed to google.. the movie is shorter than 10mins also... cant figure out how to change/check the youtube password in imovie..
thanks in advance of your help..

Thank you -   that is what I have been doing. I dont know what has changed, but I get that error message - username and password incorrect.      Where else are the settings in Imovie or Quicktime - so that I can check or change the password there.
I have entered my gmail account - and deleted it .. and reentered it - but it still doesnt work.    Ive even been into my gmail and youtube settings and made sure they were both the same...
and still it doesnt work....
its particularly frustrating because it always used to work and was so simple.
Any other tips or clues.

Similar Messages

Solve error message when uploading to youtube

Does anyone know how to upload videos to youtube? I never had a problem with the Premiere Elements 11, but on Premiere Elements 12, I get an error message that is not very helpful. I've scoured every online forum I can think of for an answer and cannot locate anything useful to get over this error message.

Janaschmidt
What computer operating system is your Premiere Elements 12 running on?
How do you upload content to YouTube
a. For 12, Publish+Share/Social Websites/YouTube which preset
or
b. For 12, Publish+Share/Computer/and a choice such as AVCHD to export to file saved to the computer hard drive, followed by uploading that saved file to YouTube at the YouTube web site.
or
c. Both
How far do you get in the process? And when specifically in that process does the error appear? Have you tried "a" and "b" cited above? Does "b" work while "a" does not.
What exactly is on the Premiere Elements Timeline in the way of content and content duration? Are you over 15 minutes in content duration?
Please supply the above information and let us know if "b" as a troubleshooting tool works for you.
Thank you.
ATR

Error message when uploading to Youtube

Hello;
I am having trouble uploading videos to Youtube. I keep getting the following message: "Online services encountered an error. The service will now be terminated or paused if possible." What does this mean and how do I fix the problem?
Thanks
T

tlopes
Just got finished with my test runs of Premiere Elements 11, 12, and 13 for upload of Timeline content to YouTube from within the Premiere Elements Publish+Share area.
Only same 8 photos on Timeline uploaded to YouTube (High Definition Video for YouTube - 1920 x 1080)
Premiere Elements 13, two times....once as is and once refreshed Online Services, closed program, reopened program
When the progress reached Uploading the error is "Online Services encountered....."
When the same 8 photos were uploaded in Premiere Elements 11 or 12 on the same computer in the same time frame,
there was no problem. The uploads went to successful completion in the Premiere Elements feature.
No solution, but wait. I have yet to clear the Cached Web Content and shut down the computer router. My default browser
for this was Mozilla Firefox v 32.0.3. Based on Saskwatch's success with Safari and Vimeo, I may try Internet Explorer 11.
Right now my browser choices are Firefox, Google Chrome, and Internet Explorer.
I am working from Premiere Elements 13 tryout. Are you working with a purchased version of 13?
More later.
ATR

HT2623 I keep getting an error message when I enter my password for iCloud IMAP server

I keep getting an error message when I enter my password for iCloud IMAP server

A number of users who have chosen to set up iCloud mail manually in the Mail application seem to encounter problems with continually being asked to sign in. This may well be a result of incorrect settings such as not setting 'Apple Token' for authentication under the accounts advanced settings.
A more general approach to remedying such problems would be to turn off Mail in System Preferences/Settings > iCloud, checking the account has been removed from Mail (and deleting it if it hasn't), restarting and then enabling iCloud Mail again from System Preferences/Settings > iCloud. This will ensure the correct settings are used.

Error message when uploading - need help to fix

I am getting this error message when uploading to ftp host:
﷯Error:
Error uploading file master_a-master.css. Click Resume to try again. If this problem persists, try again later.
[421 Idle timeout (600 seconds): closing control connection]
how do I fix this?? have already tried to resume,,, tried from scratch. closed program and opened again. does this each time.

Make sure you're doing everything recommended by BlackBerry:
www.blackberry.com/btsc/KB34045
If you're hitting reload and it isn't reloading the OS for you, perhaps try reloading a backup file you've created (hopefully you've done some backups).
Keep us up to date on your progress.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

IPCC Error Message When Uploading Script

Have anyone seen this error message before? If yes, what the resolution.....
I am getting this error message when uploading a new script or add a new resource group
can not acquire ClusterMutex; nested exception is: com.cisco.config.ConfigException: Store config record - error: config request timed out
Please advise.....

Cisco have a doc on fixing Mutex lock errors:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00808254ed.shtml
Worked for me when getting the following error:
CRS Administration cannot perform any update at this time because there is an ongoing 'Cluster Mutex acquired by FileMgmt - Upload.'
Different error but might help?

Error message when uploading- but document still uploads

Hi,
Over the past few days I've gotten an error message when uploading a document to my SharePoint site (O365/ 2013). All the error message says is "Sorry, something went wrong. An unexpected error has occurred." The correlation ID is 379ed19c-706a-1000-a3f3-e1860141685e
The strange part is that the document still uploads fine. So there's no obstruction of the workflow or anything, but something still changes in the back end.
Is this occurring to anybody else?

The process of uploading a document involves a number of steps. The upload may go fine, but fail when it tries to update metadata or check the document in. You need to track down that correlation ID in the ULS logs to get the specific step that
is failing. Here's a Blog post on how to find the error in the log.
http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.VHzsGTHF-6k
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

I am unable to restore my subscription. I receive the following error message when I enter the password: " Apple ID doesn't exists or the password is wrong".

I am unable to restore my subscription. I receive the following error message when I enter the password: " Apple ID doesn't exists or the password is wrong".

Please refer to Can't authorize with a previously used Adobe ID

Error Message When Uploading iMovie to Vimeo/YouTube

I also get an error message when trying to "finalize project". The loading seems to be going well and takes quite a bit of time for my 20 minute long movie. At the end of the upload I get a generic error message saying that due to an error, my file could not be uploaded.
Any suggestions? I have uploaded several movies to YouTube and Vimeo in the past without an issue. Now all of the sudden I am having trouble finalizing my project and uploading.
thanks,
Alex

Hello byronic42,
Welcome to the BlackBerry Support Community.
What happens when you attempt to upload a photo using Facebook for BlackBerry when connected to Wi-Fi? Do you receive the same error message?
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

ITunes crashes / error message when uploading songs to iMatch

I manage to get about 40 songs uploaded at a time then iTunes freezes and this error message appears
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    iTunes.exe
Application Version:    10.6.1.7
Application Timestamp:    4f71aced
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.1.7601.17651
Fault Module Timestamp:    4e2111c0
Exception Code:    80000003
Exception Offset:    00033e2e
OS Version:    6.1.7601.2.1.0.768.11
Locale ID:    2057
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Does anyone have a clue what this means and if there is a fix? At this rate I'll still be uploading songs to Match in 2013, the only thing that makes me feel better is to see I'm not the only one suffering with this!

Hello byronic42,
Welcome to the BlackBerry Support Community.
What happens when you attempt to upload a photo using Facebook for BlackBerry when connected to Wi-Fi? Do you receive the same error message?
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Error message when upload PO (DTW)

Dear All,
when i upload PO using the DTW, error message prompt out, but i cannot find any mistake in the upload files for both header and items. i have 10 records to upload, then i upload it one by one, there is no problem.
would like to know if anyone have idea of what is the meaning of the following error message? i have no idea about it and cannot search from the web.
'Internal error [-2038] occurred' Application-defined or object-defined error65171
Thank you very much!!

All 65171 errors are related to field format mismatch. If you could DTW one by one, you may have problem with RecordKey and LineNum mismatch.
Thanks,
Gordon

Why do we get First operand...error message when trying to change password

Hi
I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
We are using PeopleSoft Financials 8.8 SP1.
We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
I cannot replicate it in our test environments.
I have confirmed that we have the PSWDEXPR permission list in our environment.
I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
Any suggestions?

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Input/Output error message when uploading a DVD to copy.

Hi All,
I have been getting this message "Unable to Create: input/output error." when trying to upload a dvd to burn using Disk Utility . At first I thought it was a problem with the disc so I had a friend of my send me another copy. This was 2 discs. The first disc I get the error message the 2nd disc copied perfectly. My friend sent me the first disc again and I still get the same error message. It uploads about 2/3 of the disc and then the error message shows up. I tried on both my desktop and laptop and same error message on both. Both are using Leopard.
This is not a copyright protected disc. This is a personal disc.
Any help would be greatly appreciated.
Thanks in Advance.

I have exactly the same problem. I'm trying to create images for all my DVDs created on Windows Vista. Unfortunately, when around 80% of the disk is already read, I'm getting:
6/4/08 9:54:06 PM Disk Utility[1872] Unable to create “Lena - prawie 2 lata.cdr”. (Input/output error). I have been able to reproduce this issue on 3 DVDs so far (all filled with 4GB of data).
The only DVD that I was able to duplicate was 1.4GM is size. Any suggestions?
Regards,
Marcin

Error Message when uploading report but report works fine

Hello ,
I am facing a strange issue here, when i try to upload a report in Crystalreports.com using ODC there is an eeror message shown - " The Open Data URI does not appear to be valid one or the server is down.Do you want to Continue?"
When I click 'ok' the report uploads and when its run it works perfectly fine , it shows the parameters to choose and pulls the
right data.
Has anyone faced this ? and any idea why that error message appears although every report uploaded works perfectly fine?
Thankyou
dpa

Hi dpa,
The crystalreports.com server does some validation of that url to make sure it can be reached and that it returns some info to ensure it is an odc deployment.
It sounds like there is something particular about your url or odc deployment that is causing this validation to fail unnecessarily.
Could you enter a support ticket and supply the url that you are using so that we can test it out to find out what exactly the problem is?
Thanks
Steve

Error message when uploading to youtube..password incorrect?

Similar Messages

Maybe you are looking for