Error message while activating ODS ZFI_ORD( FI Order Details)

hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
Pooja

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Similar Messages

Error coming while activating ODS

Hi,
While loading data in datasource there is a field item text in which a small box is coming due to which error is coming while activating ODS. When i check line item of datasource it shows me '#' instead of that box.
So i wrote a code in ECC to remove special characters. But still it is not deleting that small box and sending me error in ODS.
The data comes same in the table also with that small box.
Please tell me how to solve that problem as i cant do it manually as there are a lot of records. Do tell me how to remove it.
Roma

Hi Roma,
Actually all the invalid characters in the error message are displayed by small square box only. So you might not get which actual character it is.
Check the below given article for removing special character. In this article they have mentioned one standard FM to remove the characters which you can use in update rule or transformation for filtering invalid characters.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0cdc928-5e2d-2e10-e1bb-ec77bcb5cbfd?QuickLink=index&overridelayout=true]
Regards,
Durgesh.

Error Message while assigning resource to work orders

Hi All,
We have the MRS tool integration with service work orders for scheduling. When we assign the resources with 9 hours as duration there is no error. When we allocate more than 9 hours for some resources, not all, we receive the error message as
" Duration    29,160 S is not a multiple of 15 minutes " . These duration of secs varies when the duration is varied > 9 hours.
We have checked the planning board profile configurations but nothing seems to be visible. In customising we have the following settings,
Time Granularity                 : 15 mins
Min duraiton of assignments: 15 mins
Automatic Assignment Splits
Min duraiton           : 2 hours
Max overtime hours : 2 hours
Max Ratio is %       : 75
Can anyone throw some light on this?
Regards,
Selva

Hi Anil Satya,
The MRS is integrated with Service Order types and the operations are selected for each order then the assignment of hours takes place in MRS.
If the assignment is done for 9 hours then there is no such error. These errors are very specific to some personnel numbers ( not for all ) where the duration is more than 9 hours.
Is there any availability of resources for this operation / job through configuration settings? Why such a question is some resources even when 15 or 20 hours is assigned , no errors exists.
Hope this explanation provides a better clarity.
Regards,
Selva

Error message while activating MPOS

Dear All,
We are implementing SCM 2007 and are facing a peculiar problem, please help me to resolve the issue;
We have copied all the necessary standard objec from BI content and also created some of the Zinfoobjects. We have created MPOS with Z objects and other MPOS as well with 9AMATNR and 9ALOCNO.System allows us to save the MPOS but when we activate it gives an error message.
Please help me in resolving the issue.
Best Regards
Javed

Hi
Thanks for your reply .
I have already done as you have mentioned.
There is a problem of log generation too. system does not show the message text
when I try to activate the MPOS , ignoring the same systems populate another message as below; please see below;
Error occured during activation (see log).
Best regards
Javed

Error message while activating Planning Area in S&OP on Hana

Hi,
While activating my new created planning area, I am receiving the below error. Can you please help and guide me what could be the issue ?
Exception raised from InternalError: dberror(CallableStatement.execute): 129 - transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_ACTIVATEPLAREA: line 898 col 2 (at pos 8757): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_XML_CNSTR: line 1274 col 2 (at pos 8682): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_TABLE_CNSTR: line 125 col 2 (at pos 6123): [129] (range 3): transaction rolled back by an internal error: duplicate column name: T99CUSTDESCR: line 1 col 351 (at pos 350) at ptime/query/plan_executor/trex_wrapper/trex_wrapper_body/trex_query.cc:808
Thanks in advance for your help.
Regards,
Chandan

Hi Aditya,
Please see below the screen shots of MDT and PA.
Regards,
Chandan

Error message: While activating source system in RSA1

When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
System response: Error when sending data to BW.
Procedure: Enter Idoc type ZSAE008.
Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
Can anybody kindly help me resolve the issue.
Message was edited by:
Muzafaruddin Mohammed

Hi,
You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P

Error message while activating a function

Hello guys
I have just written a simple function and am trying to activate it.
When I click on check button it says 'no syntax error'. However, when I click on activate button, I get the following error. Any feedback on this will be greatly appreciated.
Error Message:
=================================
Function Module ZBAPI_XI
The main program of the function "ZBAPI_XI" does not begin with
"FUNCTION-POOL".
=================================
Thanks
Ram

Hi,
Try this..
GO to SE80..
Give the function group..
Then activate the main program..
Thanks,
Naren

Error Message while Activating Integration Model for PDS

Hi,
When we are trying to activate IM for SNP subcontracting PDS,it gives us an error message
"No authorization to create Product ".
All master data for that particular Product,plant and Subcontractor are in place in APO.
Product is also extended to Plant and subcontractor.
T-lane is also thr in APO which got created via CIF (Subcontracting Purchasing Info record).
Need your expertise.
Regards
Abhi

Hello Abhi..
recently I have faced same problem. If you are facing problem for particular product location, I would suggest
1) Delete the particular Product master globally in APO & re cif data
if doesnot work, then problem must be with authorization
Please revert in case of any issue
Thanks
Mangesh A. Kulkarni

Error message while activating imessage

i got an error message when i tried to activate imessage, what can be the reason for that?

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Error message while activating BBPSTART

Hi,
When I am trying to activate the BBPSTART service, I am getting following error
" http://XXXXXXXXX.com:8002/sap/bc/gui/sap/its/bbpstart?sap-client=100 Application not found"
Can anybody please help, what setting I might be missed?
Regards
Malli

hi
hope it might be activated earlier. however you can do .
check twpurlsvr table / logical system / here url entries are correct or not.
check it up your basis consultant
br
muthu

Error occured while activating ODS

Hi Team,
Need Help!!
After I finish DTP process, I was able to see all data loaded successfully in the monitor. But when I clicked on Activate DS Object Data, the request status changed from Green to Red. The error I am getting is "Error occured during the activation process" in the Request Status. Is there any step I am missing.
I can send a screen shot of the error If needed.
Let me know
Thanks
Anita.

This problem was resolved in the following way:
After activation, the Request was red. So I looked at the log file and saw that SID record # 39 has a space in the data. For ex:'001234 ' instead of '001234'. Went back to PSA and looked for that data using filter option and removed the space after the data and reloaded back in DTP. Everything worked fine. To resolve this in the future, I have to have the Master data team remove the space for Item Category group in source system.

Error message while loading

Dear Friends,
i am getting error message while loading data in the cube, yesterday i got the same error message while loading ODS
the error message is as follows:
Value '差旅费 - ERIC BADEN - MEETING WITH E&Y & AYKIM ' (hex. '5DEE65C58D390020002D002000450052004900430020004200') of charac.
Thank you
Mohammad Riaz

Hi
It seems that some updates were done on the source system side and whicle entering the value so character has been enetered which is not identifed by the Bw system.
The data has to be corrected in the source system, you will have to confirm it with your client that what the data should be and for the tiem being you can load it till PSA and correct the data in PSA, and push it manually.
Give the PSA details to your client, it will conatin the data in source system format, and they will know what value has to be changed.
Hope this helps
Regards
Shilpa

Price error message while creating production order- Urgent

In past i was getting warning message of 'No price could be determined for material/batch and Plant" message no CK 465 at the time of saving the production order after creation but now it has stopped even though there is no price in material amster.
I changed the configuration to Error message (TC: OPR4_PPCO) and it works but why not for warning message?
Thanks

Please confirm where i should check for Activity price?
But then why we are able to get error message.
Reexplain:
Creating a production order which do not have standard cost in material master.
While saving, getting a error message'No price could be determined.......'
Now changing the message to Warning through configuration using TC: OPR4_PPCO
Now again creating the production order and saving
Expectation to have same message as warning but not getting anything.
Thanks
Edited by: vineet garg on May 1, 2008 12:14 AM

Messages "An error occurred while activating. Try again later"

Hi
have an iMac (2,5 GHz Intel Core i5, 4GB 1333 MHz DDR3 latest OS 10.9.4) and I keep getting errors while logging in to messages
- I can send and receive imessages on my iPhone and iPad with no problems
- my apple ID is verified
- I don't have modified the "hosts" file
- My time is set on "automaticly set time and date"
- When mountain lion came out, I had no problem what so ever
- I erased my HDD and did a clean instal. The first thing I did was start imessage and log in.. same error
- I tried another apple ID (from my mom) and that didn't word either
- I changed my password and tried again
- I searched the ports and opened them on my router
- I reseted my icloud keychain
- I searched on the internet and tried everything I could find.
Can anyone help me? There was a time that I could use messages with no problem at all, but like a year ago, I kept getting this error.
Thank you kindly
translated from dutch to english: "An error occurred while activating. Try again later"

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reinstall OS X.
Step 14
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Error while activating ods

Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hari

Hi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks

Error message while activating ODS ZFI_ORD( FI Order Details)

Similar Messages

Maybe you are looking for