Error message: While activating source system in RSA1

When trying to activate a source system, I am getting a error message saying, Incorrect IDoc type ZSAG018 in the ALE definition of the source system.
System response: Error when sending data to BW.
Procedure: Enter Idoc type ZSAE008.
Prior to this there was a service pack that was applied to the R/3 system, and while testing thhe info package I got a error message and in source system when trying to activate, I get this message.
Can anybody kindly help me resolve the issue.
Message was edited by:
Muzafaruddin Mohammed

Hi,
You try to create the source sytem one more time by deleting it.And also delete the Partner Profiles, port number.
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P

Similar Messages

Error while activating source system

Dear friends,
I am getting Error ' Basic type does not exit' while activating source system in RSA1.
please give the solution .
Regards,
D.prabhu

Hello,
this is due to incomplete partner profiles;
When createing your source system you have to ensure that your source system is open for modifications (transaction SCC4) and that you have administrative rights in this system. Indeed the creation of a source system will create all partners profiles in both systems thus the source system needs to be open for modification.
ensure this and "restore" your source system from RSA1
hope this helps...
Olivier.

Error message while activating ODS ZFI_ORD( FI Order Details)

hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
Pooja

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

Error message from the source system

Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
Vish

I see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish

Error message while activating MPOS

Dear All,
We are implementing SCM 2007 and are facing a peculiar problem, please help me to resolve the issue;
We have copied all the necessary standard objec from BI content and also created some of the Zinfoobjects. We have created MPOS with Z objects and other MPOS as well with 9AMATNR and 9ALOCNO.System allows us to save the MPOS but when we activate it gives an error message.
Please help me in resolving the issue.
Best Regards
Javed

Hi
Thanks for your reply .
I have already done as you have mentioned.
There is a problem of log generation too. system does not show the message text
when I try to activate the MPOS , ignoring the same systems populate another message as below; please see below;
Error occured during activation (see log).
Best regards
Javed

Authorization for user in ECC while creating source system in RSA1 in BW

Hello All..
We are trying to create source system from BW(7.0) system using transaction code rsa1 to R/3 Production server.
After providing details in RSA1->Source system ; Remote logon screen of Production server pops up ...and ask to login thru admistrator Id..
To achieve the above task,, what authorization user should have in R/3 system..
Thanks

Hi,
Hope you are using the RFCUSER with these profile SAP_ALL , SAP_NEW , S_BI-WX_RFC in SAP ECC. Please create the RFCUSER with above profiles in ECC and BW (SAP_ALL , SAP_NEW and S_BI-WHM_RFC).
Pls follow the below steps for source system connection
In ECC side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system in ECC
3.) Assign a logical system in ECC
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WX_RFC
In SAP BI Side
1.) Client administration SCC4 ( select your client and allow changes to repository and cross client customizing)
2.) Define a logical system
3.) Assign a logical system
4.) Creating RFC user with system user type and give these profiles SAP_ALL, SAP_NEW, S_BI-WHM_RFC)
5.) Define RFC user as default (Click RSA1> Global Settings/Customizing dialog box> Glob. Settings)
Connection of SAP BI with ECC
RSA1> Source System>SAP>create>Enter the below entries
Target computer (server) Server of the SAP ECC
System ID System ID of the SAP ECC
System number System number of the SAP ECC
Background user in source system RFCUSER
Password for source system Password
Background user in BW RFCUSER (can not be changed in this activity)
Password for BW user Password
Select unicode in RFC destination and don't select the checkbox in logic screen.
On the dialog box Please log on as an basis administrator in the following screen choose Continue.
Log on to the Source System with your administrator user. Choose the correct client.
On the Replicate Metadata dialog box, choose Only Activate.
Make sure ECC client will allow changes in cross customizing client. It is one time activity once success then deselect the entry.
Hope this will help you to connect the system.
Rgs,
Ambuj Kathuria

Error message while activating imessage

i got an error message when i tried to activate imessage, what can be the reason for that?

Hi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear

Error message while activating Planning Area in S&OP on Hana

Hi,
While activating my new created planning area, I am receiving the below error. Can you please help and guide me what could be the issue ?
Exception raised from InternalError: dberror(CallableStatement.execute): 129 - transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_ACTIVATEPLAREA: line 898 col 2 (at pos 8757): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_XML_CNSTR: line 1274 col 2 (at pos 8682): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_TABLE_CNSTR: line 125 col 2 (at pos 6123): [129] (range 3): transaction rolled back by an internal error: duplicate column name: T99CUSTDESCR: line 1 col 351 (at pos 350) at ptime/query/plan_executor/trex_wrapper/trex_wrapper_body/trex_query.cc:808
Thanks in advance for your help.
Regards,
Chandan

Hi Aditya,
Please see below the screen shots of MDT and PA.
Regards,
Chandan

Incorrect Unicode setting while activation source system

HI,
I am not able to activate the source system. It gives me error of
"The unicode settings for destination BIQCLNT750 do not match the source system."
Please let me know how to fix it.
Thanks,
Dave.

Check whether you have maintained the proper Unicode settings were selected in SM59 (RFC settings) in both BW as well as in R/3?
If You are dealing with Unicode system (BW and R/3) then make sure that you select the unicode here in SM59 if not then you need to choose the other Radio button.
Once done then save the changes and then try to "restore" the connection again in order to activate the same.
Also check the below note for your issue:
Note 1156948 - Correction: Unicode indicator is incorrect
Hope this helps and solve your issue...

Error message while activating a function

Hello guys
I have just written a simple function and am trying to activate it.
When I click on check button it says 'no syntax error'. However, when I click on activate button, I get the following error. Any feedback on this will be greatly appreciated.
Error Message:
=================================
Function Module ZBAPI_XI
The main program of the function "ZBAPI_XI" does not begin with
"FUNCTION-POOL".
=================================
Thanks
Ram

Hi,
Try this..
GO to SE80..
Give the function group..
Then activate the main program..
Thanks,
Naren

Error Message while Activating Integration Model for PDS

Hi,
When we are trying to activate IM for SNP subcontracting PDS,it gives us an error message
"No authorization to create Product ".
All master data for that particular Product,plant and Subcontractor are in place in APO.
Product is also extended to Plant and subcontractor.
T-lane is also thr in APO which got created via CIF (Subcontracting Purchasing Info record).
Need your expertise.
Regards
Abhi

Hello Abhi..
recently I have faced same problem. If you are facing problem for particular product location, I would suggest
1) Delete the particular Product master globally in APO & re cif data
if doesnot work, then problem must be with authorization
Please revert in case of any issue
Thanks
Mangesh A. Kulkarni

Error message while activating BBPSTART

Hi,
When I am trying to activate the BBPSTART service, I am getting following error
" http://XXXXXXXXX.com:8002/sap/bc/gui/sap/its/bbpstart?sap-client=100 Application not found"
Can anybody please help, what setting I might be missed?
Regards
Malli

hi
hope it might be activated earlier. however you can do .
check twpurlsvr table / logical system / here url entries are correct or not.
check it up your basis consultant
br
muthu

Error message: While activating source system in RSA1

Similar Messages

Maybe you are looking for