Error message while closing the Notification

Hi All,
When trying to close notification the system provides error message u201CError in EDI Partner or partner profile partner number". The Relevant transaction code is QM02.
EDI relevant partner profiles are maintained in table EDPVW which has entry for as u2018VNu2019 = Vendor. It doesnu2019t have any entry for customer.
When I tried to debug the program the system looks for the entry for LI (under field partner type) for partner function number 51400 in the tables EDP13 & EDPP1. As it is not able to find this entry, it populates above error message. The entry for 51400 has been updated as KU (Customer).
But the same configuration is working fine for other notification number and its getting closed successfully.
Please help me on this.
Thanks in Advance,
Regards,
Ashish

Hi Ashish
Check the partner profile configuration using transaction WE20, you may get some idea
Regards
Madhan D

Similar Messages

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Error message while uploading the flat file

Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshay

hi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

Display Do u want save changes or not? message while closing the window

Hi All,
I have one requirement.I developed one form that contains 4 windows.
I entered in the 3rd window and i have made some changes but not saved.when i close 3rd window it is not giving any message like 'Do u want save changes?'after closing the 3rd window cursor will go to 2nd window.if i open 3rd window again it is propmting the message(Do u want save changes or not?).How can i get this message while closing the 3rd window?
i have written the following code in app_custom body
IF (wnd = 'WINDOW1') THEN
app_window.close_first_window;
ELSIF (wnd = 'WINDOW3') THEN
lv_wnd_status := get_window_property('WINDOW2',VISIBLE);
IF lv_wnd_status = 'TRUE' THEN
     go_item('BLOCK2.ORDER_NUMBER');
     set_window_property ('WINDOW3', visible, property_false);
ELSE
app_window.close_first_window;
END IF;
     ELSIF (wnd = 'WINDOW2')
THEN
lv_wnd_status := get_window_property('WINDOW3',VISIBLE);
IF lv_wnd_status = 'TRUE' THEN
set_window_property ('WINDOW2', visible, property_false);
ELSE
app_window.close_first_window;
END IF;
     ELSE
app_window.close_first_window;
END IF;
Can anyone give me some idea.
Thanks in Advance
Edited by: DhanaSurya on Apr 27, 2010 9:41 PM

Iis this the only code which you used to hide/display window?
Might be some navigation is happening in your form. Like if there is relationship between window2 and window3's block and when you access the window2 then you try to move to the next reocrd and then you are try to go to the WINDOW3's block.
Or there is any CLEAR_BLOCK built-in bieng use in you form.
-Ammad

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

I get an error message while converting the file. you do not have the privilege to make changes. I get this message when I try to import a music CD

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

Errors Message while issuing the material in MB1A i.e unrestricted material

Hi Expert,
I want know the Message while issuing the material in MB1A we are getting the error unrestricted material, so what is the reason of error.(i.e there is no stock available or any other give me the reply as soon as possible)
Regards,
Ram Rathode

You are not clear. What is the error message that you get?

Error messgae while saving the Notification

HI All,
We got one requirement, when we are creating the PM Notification (TC: IW21) we are assigning the already exiting PM work Order. After assigning the work order, we are saving the notification. While Saving the Notification the system should check whether the Maintenance Planning Plant (IWERK) and Planning Plant (SWERK) of Notification is same as Maintenance Planning Plant (IWERK) and Planning Plant (SWERK) of PM work Order. If it is same then Notification should be saved else u201Cerror messageu201D should be displayed.
Note:
Maintenance Planning Plant (IWERK) is available in HEADER TAB of Notification or PM Work Order. That is next to Planner Group.
Maintenance Planning Plant (SWERK) is available in LOCATION tab of Notification or PM Work Order. That is next to Planner Group.
We are using the user exist QQMA0014 (PM notification: validitye checks during save) for this purpose. We are able to get the IWERK and SWERK value of PM work Order eassily, sine the data stored in AFIH and ILOA table (ILOA-ILOAN = AFIH-ILAON). Even we are able to get the IWERK value of Notification from VIQMEL structure before Notification saved. But we are not able to get the value of SWERK of Notification before saving the Notification because SWERK value is stored ILOA table. For accessing SWERK from ILOA table, we need ILAON from VIQMEL. The problem is ILOAN value is not avialable in VIQMEL before the Notifivation is saved.
Please let me know how we can get this value or is ther is any other user exit from which, we can get this??
Regards
Ramu

Dear Ramu,
Can you once again come up with your querry in shot message.
Regards,
Kaushal rai

Error message while Archiving the PO on 4.6C version

Hello Team ,
We are archiving the PO in SAP 4.6C version.
Some of the PO failed with the below error message "4203018801 Item 00002 still entered in info record as last document item".
i have kept the deletion flag for the info record and tried to archive the same. But it got failed.
Can any one help me how to overcome this error.

Hi,
Ensure that the deletion indicator has been set to the correct info record. Please check in table EINA, whether the deletion indicator (EINA - LOEKZ) is flagged for the material and vendor combination.
If everything is flagged correctly and still system is throwing the same error message, please check the note: 335800 - SARA: Deletion indicator not set, but why?
Regards,
AKPT

Error message while saving the sales order

hi all,
i have maintained a material material master, sold to etc pr00 conditions maintained, schedule line is determined correctly but i am still getting this message while saving the order
"Product 234345 does not have schedules assigned. Contact system administrator
Message no. ZV276"
can anybody help?
Sa

Suman,
i would suggest you please sit with your abaper he can might be solved your issue.
because Message no. ZV276 seems to be comes from user-exit which you implement for VA01/VA02 Tx.
Amit.

Error Message while converting the PO to A/P Invoice

Hi,
We use Business one 2007A. One of the users is getting the error message that says "Object reference not set to an instance of an object" while adding the A/P invoice.
As a super user, I am able to add the invoice.
Can someone tell me what this issue is?
Thanks

Hi,
You may check "Object Reference Not Set To An Instance Of An Object"
Thanks,
Gordon

Error message while closing mobile sales on a vpn-connected notebook

Hi!
We're working with Mobile Sales 4.0 on laptops with WinXP ...
When our field service stay connect via vpn with the central server sometimes it happens that an error-message pop up if Mobile Sales shall be closed. The text is "this program is used to host and to initialize the UF F found a problem ...". What does this text mean? What is "UF"? Why raises this error?
Thanks a lot in advance for your help!
Best regards,
Ingo

Hi Paul!
Sorry. No note. It was a ...
0000000012 Individual solution without a specific SAP Note.
If you need the zip (1.6 mb) please call me at
ISchmoekel [at] nordIT [dot] de
Best regards,
Ingo
Here's the complete text from sap:
Dear Ingo,
Can you please ensure that the following Dlls in the machine are
registered:
1. Register all the Dlls and ocx files available in
<<Installation directory>>\Sap\Mobile\bin directory.
2. Register the dlls and ocx files available in
<<Installation directory>>\Sap\Mobile\3rd_party directory.
3. Register the sfabol.dll and msa.dll. It will be available under
<<Installation directory>>\Sap\Mobile (or in the sub-directories
based on how settings are at your end.
But before doing the same, please ensure that you
unregister the other Dll first.
As you are aware, the starting application is UFContainer.exe. The same
requires the following Dlls/OCX to be registered:
1. sfabof.dll
2. scrrun.dll in C:\winnt\system32 directory
3. ErrComp.dll
4. UFCore.dll (based on the IE Version)
5. ACTBAR.OCX
6. MSCOMCT2.OCX
7. comdlg32.ocx
8. SSLSTBAR.ocx
9. MSCOMCTL.ocx
Can you please ensure that the above are indeed registered in your case
Some of the above exists in C:\winnt\system32 directory.
Please test again, after you did the above!
If this could not help you, pls try the following:
This solution will only work with laptops/Tablet PC running IE6.0
Please check the IE version before trying to apply these changes
Here are the steps necessary to carry out the changes:
1. Download the zip file attached with the OSS and copy it into a
temporary folder Eg. C:\ForDelete
2. Unzip the contents in the same folder.
3. Locate the installed bin path of the Mobile application. Usually it
will be C:\Program File\SAP\Mobile\bin
This folder will have lots of dlls.
4. Copy
UnregisterUIF.bat
RegisterUIF.bat
in
C:\Program File\SAP\Mobile\bin and in
C:\Program File\SAP\Mobile\bin\IE60
run UnregisterUIF.bat from both the folders
5. Copy the following files
UFStorage.dll
UFIContainer.dll
UFIControls.dll
C:\Program File\SAP\Mobile\bin and in
C:\Program File\SAP\Mobile\bin\IE60
run UnregisterUIF.bat from both the folders
5. Copy the following files
UFStorage.dll
UFIContainer.dll
UFIControls.dll
UFICoreInt.dll
UFIPlugins.dll
UFITypes.dll
MobileClient.exe
UFTools.exe
into the folder C:\Program File\SAP\Mobile\bin\
Run RegisterUIF.bat
6. Copy the following files
UFCoreIE60.dll
UFControlsIE60.ocx
UFFrontendIE60.dll
into the folder C:\Program File\SAP\Mobile\bin\IE60
Run RegisterUIF.bat
7. Start the mobile client and verify if the crash at that scenario
is fixed.
8. If everything works fine delete the Temp folder with the Zip file.

Error message while compling the following code.can some body help me?

Hi all,
I wrote a simple program which connects to oracle 9i which uses thin driver,
the following code is
import java.io.*;
import java.sql.*;
import oracle.jdbc.*;
import oracle.sql.*;
import javax.sql.*;
class JdbcVersion
public static void main (String args[])
throws IOException, SQLException
     //Register Oracle's Driver
     DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
     //Build the connection string.
     String connString ="jdbc:oracle:thin:@(description=(address_list=" +
"(address=(protocol=tcp)(port=1521)(host=home-f831b673e0))" +
"(address=(protocol=tcp)(port=1521)(host=home-f831b673e0)))" +
"(connect_data=(sid=PLSExtProc))" +
"(source_route=yes))";
Connection conn = DriverManager.getConnection(connString, "<username>", "<password>");
// Create Oracle DatabaseMetaData object
DatabaseMetaData meta = conn.getMetaData();
// gets driver info:
System.out.println("JDBC driver version is " + meta.getDriverVersion());
and after compling this code i am getting an error message that
C:\>java JdbcVersion
Exception in thread "main" java.sql.SQLException: Io exception: Software caused
connection abort: recv failed
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at JdbcVersion.main(JdbcVersion.java:24)..
can any one help me in this regards??

hi nthali,
now i wote a simple code as you suggested....and again encontering with new problem
import oracle.jdbc.*;
import java.sql.*;
public class Test {
public Test() {
public static void main(String[] args) {
Test test1 = new Test();
test1.test();
public void test(){
try{
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:Oracle:thin:@localhost:PNPKEY:'scott':'tiger'");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select * from player");
while(rs.next()){
System.out.println(rs.getString("id"));
// System.out.println(rs.getString("name"));
catch(Exception e){
e.printStackTrace();
this is java code...
and while running it is giving me an error like this....
C:\work>java Test
java.sql.SQLException: invalid arguments in call
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at Test.test(Test.java:14)
at Test.main(Test.java:9)...
can you help me??? in this problem...please??

Error message while closing the Notification

Similar Messages

Maybe you are looking for