Error message while configuring logical standby in OEM

Hi,
I am trying to configure a logical dataguard using OEM. I am using the option use staging area option, I am receiving the error message the user does not have permission to create db files.
Any suggestions on this please.

Os versio red hat 5.6
oracle - 11.1.7.0
just an error message
The following files or directories cannot be created due to the specified reasons: The specified user does not have the write permission required to create these files or directories /db/db01/oradata/sysaux01.dbf; ............
The specified user does not have the write permission required to create these files or directories.
Edited by: 794729 on Jun 16, 2011 10:28 AM

Similar Messages

Error messages while configuring Scheduler on AIX Machine

We want to configure OBIEE Scheduler on our AIX Server. While we try to run schconfig.exe we could notice the fallowing error message.
exec(): 0509-036 Cannot load program schconfig because of the following errors:
*0509-150 Dependent module libnqutilitygeneric.so could not be loaded.*
*0509-022 Cannot load module libnqutilitygeneric.so.*
*0509-026 System error: A file or directory in the path name does not exist.*
We have already created S_NQ_ERR_MSG, S_NQ_INSTANCE, S_NQ_JOB, and S_NQ_JOB_PARAM tables for this purpose.
We have taken following steps to execute the schconfig file on AIX environment: -
In /u04/OracleBI/setup directory we ran the following shell scripts
*1) common.sh*
*2) .variant.sh*
*3) sysenvinit.sh*
*4) user.sh*
Then we went to */u04/OracleBI/server/bin* and executed the file *"schconfig"* but no use ...
Please suggest what needs to be done.
Thanks in advance!!!
Regards,
Nithesh.

I tracked the issue to faulty Oracle 11g Client drivers for 64-bit, reinstalling/rechecking the client and client paths did not help.
I installed Oracle 10g R2 64-bit drivers and that fixed the issue for me.

Client context error message while configuring for social login and personalization

Hi,
I am getting the below exception while configuring for social login and personalization.
27.12.2012 11:21:25.463 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper Problems while creating connection.
27.12.2012 11:21:46.549 *WARN* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper token was null or not in UNAUTHORIZED state:1
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.servlet.OAuthProfileImportServlet requestAccessToken: could not retrieve user
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587506549] GET /etc/cloudservices/facebookconnect/sample_fb.login.html HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:48.455 *ERROR* [127.0.0.1 [1356587508455] GET /etc/clientcontext/default/contextstores/profiledata/loader.json HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Uncaught SlingException org.apache.sling.api.SlingException: An exception occurred processing JSP page /libs/cq/personalization/components/profileloader/command/load/load.json.jsp at line 41
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspExceptionInterna l(JspServletWrapper.java:574)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspException(JspSer vletWrapper.java:499)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper .java:451)
at org.apache.sling.scripting.jsp.JspServletWrapperAdapter.service(JspServletWrapperAdapter. java:59)
Thanks,
Shankar .A

Hi Shankar,
Any luck with this issue. I am also seeing the same issue
Thanks
Pushparajan

Getting an error message while running FX script logic

We are getting the following error message, while running the FX script logic - RUN_LOGIC:MDX statement error:"Value (Entity value) for characteristic /CPMB/U8D5FIT". Any help is truly appreciated. We are using the standard FX logic scrip *RUN_PROGRAM CURR_CONVERSION

Hi,
Hope all the required currency configuration settings are followed in Entity, Input currency, Category, Account correctly. Also reporting currency indicates the right reporting currency with the 'Reporting' propert set to 'Y' to the currency that you want to report in.
For the period that you are running the currency trans, could you also maintain rates for the reporting currency as 1.
Check your rate data. And please post your currency conversion script here.
Thanks,
Sreeni

Error message while i am trying to configure app server domain in PT 8.48.1

Team,
I am getting below error message while i am trying to configure app server domain in PT 8.48.16. I have uninstall TUXEDO 8.1 and then install 3 times. But, no luck.
Enter domain name to create
:CRPROD
Merging old domain configuration file with new template file...
source C:\Documents and Settings\psadmin\Desktop\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard

am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.

Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu

An error occurred while configuring server as a directory server. Please check your network configuration and try again.

Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
    Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
        "Creating Open Directory master"
    ), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
Kim

Had the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0

Error message while Solaris 10 installation

I got that error message while installation without knowing the actual reason behind it :
Searching for configuration file //cdrom/solaris_10/misc/install_config/sysidcfg
Could not find file.
Searching for Jumpstart directory : not found
could not find matching rule in rules.ok

OK, reinstalled XP, and problem solved.

Error message while creating database

Log error
while creating new database
Robot-properties
XML Parsing Error: junk after document element
Location: http://portalserver/psconsole/faces/search/RobotPropertiesHome.jsp
Line Number 18, Column 1:<body id="_id3" onload="return _id3_jsObject
I have created my new search engine .
and the robot is not running.I getting log error.
and no directory is created with the search name.
please help me with the fields..
creating search server..
required Port:
required Configuration Name:
Required Instance:
*Web Container Administration*
Required Administration Host:
Required Administration Port:
Required Administrator:
Required Administration Password:
*Web Container Directories*
Required Install Directory:
Required Instance Directory:
Required Document Root Directory:

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

Getting an error message while trying to update Adobe AIR.

I keep getting this error message while trying to update Adobe AIR:
Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
*Please help me resolve this issue.

Sundeep, I'm getting the same message.
I'm on OS 10.5.8
I've downloaded the Adobe AIR Installer, but the installer always indicates that it will update Adobe AIR
Installed: 1.5.2.8870
Update: 1.5.3.9130
A spotlight search for these two log files produces nothing.
I also followed your instructions here:
Double-click the Terminal application located at /Applications/Utilities/Terminal.
Type cd /Users/userName.
Type echo > .airinstall.log and/or echo > .airappinstall.log "
But terminal replies with "No such file or directory"

I got an error message while burning a cd in itunes - "The attempt to burn a disc failed. The burn failed because of a medium write error. What is that and how can i fix it?t

I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?

The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

Error Message while making PO

Hi,
I got a error message while creating PO.
"No short text maintained in language DE(Please re-maintain material)"
How to go with this?
Regards

Hi,
check MMR language........
Or
use this path
SPRO-MM-Purachsing- Meassages-Define Texts for Purchase Order
Here maintaion text for Header and item for document item (EKKO,EKPO for ur doc type)and save.
Regards,
Biju K
Edited by: Bijay Kumar Barik on May 14, 2008 12:22 PM

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Bypass the error messages while opening the Web Analysis 9.3.1 Report

I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
Thanks

Karen,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Error message while configuring logical standby in OEM

Similar Messages

Maybe you are looking for